• Korean Journal of Social Welfare
• /
• 제59권3호
• /
• pp.59-73
• /
• 2007

The compensation system in industrial accident insurance is systemized with "either receiving all or no benefits at all" according to "admited or denied as an industrial accident". Therefore, they are centered on the decision as "industrial accident" or "non-industrial accident", but judging between the two is very complicated, and has inherent conflicting factors. In the early stage of industrialization, industrial accident compensation was based on the indemnity liability for employer's faults. In order to be compensated any damage, the injured worker should prove that the accident was not due to his or her faults. However it was very difficult for injured worker or his or her family to prove the employer's faults, so it was almost impossible to get compensation. Thereafter industrialization progress and improvement of workers' political status lead to conversion from principle of liability with employer's faults to principle of liability without employer's faults. In addition to that, coverage of industrial accident compensation was also expanded. This improvement strengthened the benefit payment principle of "All or Nothing". Even though the "All or Nothing" principle provokes tremendous criticism, the reason why it's difficult for industrialized countries to adopt partial compensation system, is that partial compensation system worsens the administrative hardship, therefore industrialized countries overcome the restrictions of the "All or Nothing" principle with making balance in provisions for any risk to some extent. However, in Korea because the general compensation system for covering medical cost and income loss from accidents, is not equipped, it could be possible to cause acute conflicts with regard to coverage of industrial accidents. Therefore it is required to improve the industrial accident insurance with the acceptance of the significance and logic of discriminated compensation, and create the integrated compensation system in the long run.

• Safety and Health at Work
• /
• 제8권3호
• /
• pp.290-295
• /
• 2017

Background: Safety climate and occupational stress are related with occupational accident. The present study tried to identify the differences in safety climate and occupational stress according to occupational accidents experience and employment type (e.g., direct workers and subcontract workers). Methods: In this study, we conducted a survey using safety climate scale and Korean Occupational Stress Scale and classified the participants into four groups: direct workers working for accident-free departments, direct workers working for accident departments, subcontract workers working for accident-free departments, and subcontract workers working for accident departments for 2 years within the same workplace in the shipbuilding industry. Results: The direct workers and subcontract workers showed diverse results in subscales of safety climate and occupational stress. This result is supported by existing studies; however, further study is necessary for more supporting evidence and elaborative methodological approach. Conclusion: The necessity of management for safety climate and psychosocial factor such as occupational stress for both direct workers and subcontract workers as a whole is suggested by this study.

• Journal of Environmental Health Sciences
• /
• 제36권6호
• /
• pp.441-455
• /
• 2010

Researchers who work in science and engineering R&D laboratories are commonly exposed to a wide range of chemical, biological and physical hazards. They also may adopt ergonomically poor postures for long periods of time. These factors may increase the risk of adverse health outcomes in laboratory workers. Recently, there were several fatal accidents in the laboratories in universities and research institutes in Korea. Consequently, the 'Laboratory Safety Act' was enacted in 2006. However, there are concerns about the health risk associated with chronic exposures to hazards, as the management measures provided in this Act are very limited, focusing primarily on accident prevention and compensation for lab work-related accidents. In this article, the methods for assessing exposure to chemicals in laboratory environments are discussed. Also, epidemiological studies examining the association between laboratory exposure and health effects, including cancer and reproductive toxicity are extensively reviewed. Finally, the possible roles of environmental health professionals in this area are suggested, along with a list of critical research needs for properly assessing laboratory workers' exposure and risk.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제26권8호
• /
• pp.102-106
• /
• 2012

This paper was carried out to survey fire hazard and improvement at the drain pump in air-conditioners. Based on the results of analysis, the proposal of electrical accidents prevention and a construction improvement are as follows. A power connection of the drain pump has two types, an electrical outlet type and direct connection type at control board of air-conditioner. The electrical outlet types need a bulletin sign or education as malfunction of the drain pump include an additional accidents, current leakage and overflowing with water on the floor from breaker trip by exterior cause and breaker off by mistake of worker. On the other hand, the direct connection types prevent a power interruption as exterior cause, but it has some trouble, cut of ground cable and without protection device. Usually it doesn't work by electrician when air-conditioner and the drain pump power work. Therefore an education or countermeasures are recommended for not electrician. Generally malfunction of the drain pump causes accumulated materials into the tank. Even though the accumulated materials lead to an overheating and burning as failure of detector occur an idling, periodic inspection of the air-conditioner filter and the drain pump tank prevent the trouble.

• Journal of The Korean Society of Agricultural Engineers
• /
• 제62권1호
• /
• pp.71-81
• /
• 2020

Enclosed pig house are creating an environment with high concentrations of gas and dust. Poor conditions in pig farms reduce pig weight and increase disease and accidents for livestock workers. In the pig house, the high concentration of harmful gas may cause asphyxiation accidents to workers and chronic respiratory disease by long-term exposure. As pig farm workers have been aging and feminized, the damage to the health of the harsh environment is getting serious, and real-time monitoring is needed to prevent the damage. However, most of the measuring devices related to humidity, harmful gas, and fine dust except temperature sensors are exposed to high concentrations of gas and dust inside pig house and are difficult to withstand for a long time. The purpose of this study is to develop an wearable based device to monitor the hazardous environment exposed to workers working in pig farms. Based on the field monitoring and previous researches, the measurement range and basic specifications of the equipment were selected, and wearable based device was designed in terms of utilization, economic efficiency, size and communication performance. Selected H₂S and NH₃ sensors showed the average error of 5.3% comparing to standard gas concentrations. The measured data can be used to manage the working environment according to the worker's location and to obtain basic data for work safety warning.

• Journal of the Korean Society of Safety
• /
• 제20권1호
• /
• pp.107-112
• /
• 2005

The purpose of this study is to propose and introduce Accidents Prevention Remedies(APRs) and their priorities especially for Accident Causing factors(ACFs) drawn by surveying and analyzing how much foreign workers in Korea have been exposed to dangers at a construction site. At frist as a result of the analysis of the questionnaire which 59 foreign industrial trainees working at the construction sites in Seoul-Kyunggi area had responsed, 12 ACFs and 11 APRs were put out by using the SPSS programme. Then, through the Analytic Hierarchy Process(AHP) about the questionnaire from 96 safety and civil engineers who have experienced in managing foreign labor at the construction sites all over the country, the APRs given their priorities of relative importances are as follows; First, it is absolutely necessary that every working order to foreign workers should be made more definitely in accordance with a concrete process schedule. Second, the owners should increase investments in improving foreign workers' welfare in order to minimize their potential human error. Third, Korean language education programme for simple technical terms should be made and executed at least.

• Journal of The Korean Society of Agricultural Engineers
• /
• 제55권3호
• /
• pp.85-89
• /
• 2013

In the current domestic, many industrial accidents have happened. And these are analyzed according to several factors. But it is difficult that they evaluate their business safety. Thus, we conducted a study on business specific safety assessment techniques in order that business know their safety level and perform appropriative safety activities. Study methods are survey and AHP (Analytic Hierarchy Process). Each specific weighting factors to calculate the survey was conducted for safety and consulting experts (20 persons). Weight factor was used to AHP decision support as one of the ways through a number of alternatives to the ratings for the Minesota Multiphasic. Factors are each type of industry, specific industrial scale, disaster type and strength, worker age and tenure period, and region. First, survey was conducted with 20 professionals to estimate the weighting factors. Weights between factors using the AHP analysis tool based on the mean values were calculated. Second, last 3 years between the industrial accidents statistics were used to calculate the weights for each of the rating factors in the Occupational Safety and Health Agency. Grade weights between each factor which was based on the rating of each factor was calculated as the average of three years. Finally, the weights between each factor and the grade weights for each factor using the safety level of the enterprise were calculated so that you can evaluate the weighting.

• Journal of the Korea Safety Management & Science
• /
• 제8권1호
• /
• pp.85-96
• /
• 2006

The oriental life change unit(LCU) models differ from the western LCU model in human behavior, life style, ideas, culture, and psychology factors. Especially, the cause and effect models by behavior scientific approach method have provided the accident proneness concept through the LCU factors. Therefore this paper describes the analytical results of the oriental LCU model and western LCU model. Especially, the death of parents and death of close friend in Korean LCU model feel more acute stress than the western factors. In the case of Korean LCU models between the unmarried and married workers living in the middle area of Korea, death of parents, change in family member's health, change to different line of work, and change in work hours and condition are significant at the significance level of 5%. The priority of life change factors in these models is approved in the order of death of parents, death of spouse, death of close family member, and death of close friend. Finally, the result of this paper can be easily used in order to minimize the industrial accidents by the job stress with the worker and safety manager in real fields.

• International Journal of Safety
• /
• 제5권1호
• /
• pp.5-9
• /
• 2006

The present study reports on the results of a risk survey of machinery safety at a shoe factory in Qingdao, China. The aim is to decrease industrial accidents and increase worker job satisfaction by searching for a change from a trend analysis and making improvements in problem areas. The first risk survey for machinery safety was carried out in April 2005. Based on the analysis of the survey results, machinery safety devices was installed in the factory by using CATlA V5. Also, we investigated job satisfaction concerning working apparatus and work tool improvement in a questionnaire about the working environment. The second survey of machinery safety was carried out in September 2005. We are in the process of comparing the first survey results with the second survey results in order to analyze decreasing trend in industrial accidents and improvement in job satisfaction. So far the data have shown improved short-term turnover and absenteeism. It means CATIVA V5 and CFR has had positive effect regarding safety in shoe manufacture industry. The survey with CATIVA V5 and CFR will be expanded to other East-Asian countries including Vietnam. The hope is that the present approach could make a significant contribution toward improved safety.

• Journal of the Korean Society of Safety
• /
• 제19권1호
• /
• pp.108-116
• /
• 2004

After the IMF financial crisis, a lot of risks in construction industry have been increased gradually with the expansion of construction industry widely, higher stories of building, and the expansion of the underground space and excavation work. These risks are bringing out construction accidents such as the death, the injury of worker and so on, not so much as it would be effected the corporation's image. In spite of these situations, many construction industries still maintain the wrong methods and not try to decrease construction accidents. Recently, we should focus on the fact that management system of the larger construction also is being good, on the other hand, the condition of the work in the case of smaller construction industries is very poor, construction company have a particular safety management system but it has a difference according to the construction magnitude, construction companies have a particular safety management system but it has a difference depending on the construction according to the construction magnitude. Therefore, this study will suggest the developed way of construction safety management by the comparison and analysis from the difference between the higher and the smaller construction industries.