• Nuclear Engineering and Technology
• /
• v.2 no.2
• /
• pp.97-106
• /
• 1970

Radiation accidents which occured in the A.E.R.I. during last ten years are described (table 1). It seemed to the authors that some of these accidents were considered to be hazardous to man body and associated installations. This report deals with the following four major accidents involving body contamination incidents that our health physicists have been experienced. 1. Over-exposures (up to 130 rem) to the total body due to the mismanipulation in the Cobalt-60 gamma irradiation facility. 2. Floor surface contamination (up to 13 mrad/hr) and its spread out due to the mishandling of radioiodine contained in the bottle. 3. Body surface contamination and 0.36 uCi radioactivity accumulated in the thyroid gland of a worker due to the inhalation of gaseous iodine-131. 4. A void capsule due to the leakage out of the radium therapeutic source (3mg\ulcorner) These accidents were treated by definitely prompt action to protect the workers and associated installations from any radiation hazards and every possible efforts were made to confine the spread of radioactive contamination as small area as possible by means of elaborate decontamination work and monitoring.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.3
• /
• pp.59-65
• /
• 2017

The purpose of this study is to investigate the factors and effects of job stress of construction workers on construction accidents and turnover intention in order to improve the field work environment of construction industry which shows higher industrial accidents than other industries. To this end, research models and hypotheses were established based on previous research, and the questionnaire was distributed to 10 construction companies in Daejeon, Sejong, and Chungcheong provinces. The 301 data collected were performed statistical analysis such as basic statistical analysis, factor analysis, reliability analysis, correlation analysis, regression analysis, and logistic regression analysis using the statistical package (IBM SPSS 22). The results of this study are summarized as follows. First, job stress has a significant effect on accident occurrence. Among the sub-factors of job stress, there was positive (+) influence on work culture and relationship conflict between peers, and organizational system had negative influence. Job demands, compensation incompetence, and job instability were not statistically significant. Therefore, it is necessary to concentrate on the factors of work culture, organizational system, and relationship conflict in the construction site. Second, job stress has positive effect on turnover intention. Job stress, inadequacy of compensation, and work culture were positively related to turnover intention. Third, job demands have a slightly greater impact than compensatory inadequacies. The factors that make the job turnover more important are the excessive job burdens such as respect, internal motivation, responsibility rather than expectation non-conformity, time pressure, increase of work load. Therefore, in order to reduce the turnover intention of the construction worker, it is necessary to pay attention to improvement of the job requirement. Fourth, the worker's job stress could overcome by exercise and fatigue elimination, work environment management, and self-opening for others. It is necessary to establish a work environment management system for counseling and intimacy formation to open up the exercise and fatigue relief program of the workers at the construction site and to open themselves between the workers and the supervisors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3236-3244
• /
• 2011

Negligent accidents are often caused by risk factors of working environment at most construction sites and construction schedules are delayed as the workers' work location and construction progress are not figured out accurately, and this leads to a lot of loss. In this paper, with the object of solving the problems at construction sites, RFID portable device, active tag and wireless RFID reader to provide the status of workers which is based on location are designed in order to send information about the location of workers and work progress in real time to a personal RFID device. Also an application system to monitor workers' approaching to prevent accidents from vehicles and danger zones and to manage the real time location of workers is designed.

• Smart Media Journal
• /
• v.12 no.3
• /
• pp.120-128
• /
• 2023

There are various ICT technologies continuously being developed to reduce damage by industrial accidents. And research is being conducted to minimize damage in case of industrial accidents by utilizing sensors, IoT, big data, machine learning and artificial intelligence. In this paper, we propose a design method for a smart device capable of multilateral communication between devices and smart repeater in the communication shaded Areas such as closed areas of industrial sites, mountains, oceans, and coal mines. The proposed device collects worker's information such as worker location and movement speed, and environmental information such as terrain, wind direction, temperature, and humidity, and secures a safe distance between workers to warn in case of a dangerous situation and is designed to be attached to a helmet. For this, we proposed functional requirements for smart devices and design methods for implementing each requirement using sensors and modules in smart device. And we derived evaluation items for performance evaluation of the smart device and proposed an evaluation environment for performance evaluation in mountainous area.

• Journal of Preventive Medicine and Public Health
• /
• v.14 no.1
• /
• pp.89-96
• /
• 1981

Of 2,740 industries in Jeonbug area which are covered by industrial insurance policy, 462 facilities which the accidents related to industry occured during the year of 1979 were studied. and the results are summarized as follows: 1. The accidents related to industry occured in 462 industries of the total 2,740 industrial facilities in Jeonbug area as of 1979. 2. The incidence rate of accident per 1,000 workers was 34.3 (49.2 in male workers and 12.8 in female workers), the frequency rate of the total industries in jeonbug area was 13.36, and severity rate was 1.3. 3. The frequency rates and severity rates by type of industry in study area were quite different to compare with those of national rates. 4. The incidence rate of construction industry was 223.6 per 1,000 workers, and that of transportation-communication industries were 78.6. 5. The proportion of industrial accidents of $20{\sim}24$ age group was 22.1 per cent of the total accidents, and the proportions decreased according to age increase. 6. The incidence rate in the industry having less than 49 workers was 20.6 per 1,000 workers, that of industry with $50{\sim]99$ workers was 26.7, that of industry with $100{\sim}199$ was 51.9, that of industry with $200{\sim}499$ was 80.2 and that of with more than 500 worker was 40.7. 7. The accidents which occured in the workers with experience of less than one year was 69.4 per cent of the total accidents, otherwise, the longer the workers have worked the less accident they have. 8. The most accidents occured in tile shift between 10 to 12 o'clock, and 16 to 18 hour 9. The primary causes of the industrial accidents were found to be collisions, machinery falling objects and falls. 10. The site of injury by type of industry were quite different, and the major site of injury was finger. 11. The laceration and open injuries of the accidents related to industry were 37.2 per cent of the total cases, and fractures or dislocations were 23.5 per cent, and contusions were 6.5 per cent. 12. Death rate of industrial accident was 5.0 per 10,000 workers, and those of industry were 47.6 in transportation, 42.8 in construction industry, 24.4 in mine industry, and 2.0 in manufacturing industry.

• Journal of the Korean Institute of Gas
• /
• v.16 no.5
• /
• pp.21-27
• /
• 2012

The loss of life and property due to accidents in the research facilities or the laboratories of the university occurs steadily and the necessity of laboratory accident prevention is proposed. Above all, the main work to laboratory accident prevention is a systematic analysis of laboratories accidents. Analyzing reports or researches on industrial accidents in Korea had been carried out but these researches or reports did not based on laboratory accidents analysis. To the establishment of the accident prevention countermeasure in laboratory, a questionnaire sheet has been developed in this study. The questionnaires to survey the accident cases were gathered by electronic mail and visit survey from the laboratories and universities. The data of accident cases from the questionnaires was analyzed and discussed on accident distribution by season, the type of accident classification, the type of occurrence, the objects that caused the accident and laboratory accident by the damage incurred etc.. These results of this study can be used as basic data to the safety security and laboratory accident prevention of the laboratory worker.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.5
• /
• pp.48-54
• /
• 2021

According to the Ministry of Employment and Labor's statistics on occupational fatalities in South Korea, more than half of the fatalities in the past five years have occurred in the construction industry. The stuck-by and caught-in-between accidents associated with construction equipment is the major source of fatalities from construction sites. In order to prevent such accidents in construction sites, the government has spent lots of efforts including proposing the "special law on construction safety" and encouraging the implementation of new technology for accident prevention. However, numerous accidents are still occurred at construction sites and further efforts are still required. In this manner, this study developed a collision prevention technique that can prevent collision between equipment and worker by recognizing location and type of the nearby objects through ultrasound scanning. The study conducted a pilot experiment and the analysis results demonstrate the feasibility of achieving high performance in both object recognition and location estimation. The developed technique will contribute to prevent collision accidents at construction sites and provide the supplemental knowledge on developing automated collision prevention system for construction equipment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.3
• /
• pp.371-380
• /
• 2023

Currently, as construction projects in Korea are becoming larger and more complex, the hazard rate of the construction industry is steadily increasing, contrary to other industries. This can be seen as an indication that the safety technology and safety consciousness of construction workers are insufficient compared to the improved construction technology. In addition, due to the characteristics of the construction industry based on manpower, most accidents appear in conventional forms such as fall and trip due to human errors. Therefore, analyzing the relationship between the characteristics of human resources and accidents and establishing detailed safety plans is an essential part of reducing construction accidents. In this study, a correlation analysis was conducted using 62,805 cases of construction accident cases over 3 years to derive the characteristics of accident occurrence focusing on the age of workers. As a result of the analysis, the relationship between the age of workers and the frequency and severity of accidents for each accident type was derived, focusing on the top 10 accident types.

• Journal of Environmental Health Sciences
• /
• v.49 no.5
• /
• pp.247-250
• /
• 2023

This case report aims to introduce the safety campaign activities for preventing chemical accidents that were cooperatively conducted by an environmental office and chemical-handling workplaces located in the Ulsan area. A chemical safety campaign was initiated to examine and manage chemical-handling facilities at high risk for chemical accidents, specifically valves, flanges, and switches (VFS) from October 2020 to December 2022. The VFS safety check campaign was conducted to raise workers' safety consciousness based on a campaign of advertisements in the workplace from October 2020 to December 2021. In addition, a VFS plus [+] campaign was initiated to encourage actual management activities for chemical-handling facilities at high risk of chemical accidents in 2022. A total of 49 corporations participated in the VFS plus [+] campaign. In contrast to the VFS safety check campaign, which simply focused on publicity and resulted in changes in worker awareness, practicable safety management activities focusing on the handling facilities were carried out. Although notable short-term impacts have yet to be discerned from the campaigns, it is expected that they will eventually serve as a starting point for developing a proper safety culture and environment.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.2
• /
• pp.82-89
• /
• 2023

Due to the characteristics of ship structure, the compartment structure is complicated and narrow, so safety accidents frequently occur during the work process. The main causes of accidents include structural collisions, falling objects, toxic substance leaks, fires, explosions, asphyxiation, and more. Understanding the on-site conditions of workers during accidents is crucial for mitigating damages. In order to ensure safety, the on-site situation is monitored using CCTV in the ship, but it is difficult to prevent accidents with the existing method. To address this issue, a smart safety helmet equipped with location identification and voice/video communication capabilities is being developed as a safety technology. Additionally, the smart safety helmet incorporates environmental sensors for temperature, humidity, vibration, noise, tilt (gyro sensor), and gas detection within the work area. These sensors can notify workers wearing the smart safety helmet of hazardous situations. By utilizing the smart safety helmet and environmental sensors, the safety of workers aboard ships can be enhanced.