• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.554-563
• /
• 2009

The trend of current urban redevelopment and new city development project shows that the superstructure of building is getting larger and higher in consequence of a limited plottage condition. For this reason, it is definitely required to extend pile diameter and install more deep foundation(Mega foundation) to support superstructure. The existing precast pile construction method causes construction-related problems such as increasing quantities, difficulty of storage & transportation material and decreasing design load while construct pile in deep foundation. The drilled shaft method has applied to minimize those problems. This article will be presented construction case study of design & construction of R.C.D method for a large building foundation work on the inside and outside of the country.

• Journal of the Korean Institute of Navigation
• /
• v.18 no.4
• /
• pp.33-47
• /
• 1994

On developing port system, the performance tests of system in relation to ship maneuver generally consists of the three parts: the channel transit, the manoeuvring in a turning basin and the docking/undocking. The quantifications of risk of an accident has priviously been difficult due to the low occurrence of accidents relative to the number of transits. Additionally, accident statistics could not be related port system because of the large number of factors contributing to the accident. such as human error, equipment failure, visibility, light, traffic. etc. In case of the channel transit, "Relative Risk Factor(RRF)" or "Relative Risk Factor for Meeting Traffic" was proposed as the as the measures derived to quantify the relative risk of accident by M.W.Smith. This factor measure the tracking performance, the turning performance and the passing performance at meeting traffic. On the other hand, the safety of berthing maneuver is not measured with a few evaluating factors as controlled due to complex controllabilites such as steering, engine, side thrusters or tugs. This work, therefore, aims to propose the evaluating measure by the Analytic Hierarchy Process(AHP). Six experimental scenarios were establised under the various environmental conditions as independent variables. In every simulation, the difficulty of maneuver was scored by captain and compared with AHP scores. The results show almost same and from which the weights of eight evaluating factors could be fixed. Additionally, the limit value of relative factor in berthing safety to six scenarios could be estimated to 0.11.e estimated to 0.11.

• Journal of Korean Society of Water and Wastewater
• /
• v.16 no.6
• /
• pp.686-699
• /
• 2002

The purpose of this study is to estimate deterioration factors and weighting factors in pipe network which each local self-governments takes rehabilitation and replacement work present time. Deterioration factors in pipe network are able to effected of specific province or location related with water supply. Most of water supply pipes are laid under the ground, it is hard to quantify deterioration degree of water system. Moreover, the timing and economic limitation and insufficient information on the spot survey gives a difficulty to look over how old water supply system is. Accordingly, this study collects and analyses five data as the laying environment, visual analysis, analysis of soil contents, analysis of pipe material, and questionary survey data in water pipe of A city. The deterioration factor estimates 14 factors with excavation and experimental analysis and 9 factors without excavation and experimental analysis. Also, the weighting factors are estimated by using the multiple linear regressions and the linear programming. The estimated deterioration factor and weighting results are compared the analysis result of visual, pipe material, and soil contents with the Probabilistic Neural Network Model. Consequently, the model results of estimated 9 factors in this study and 14 factors show the 1-2% difference. The result show that the proposed model could be used to decide the deterioration condition of pipe line with real excavation and experimental analysis.

• Journal of Information Technology Services
• /
• v.20 no.5
• /
• pp.55-71
• /
• 2021

Technostress management is increasingly getting important as ICT advances and infiltrates every job and task. Especially with the advent of COVID-19, workers had to switch to teleworking utilizing ICT extensively. In this study, we developed a research model explaining antecedents and their impacts on technostress in telecommuting context, especially under the COVID-19 situation. The result revealed that techno-complexity, techno-invasion, and techno-overload are the dominant factors that affect the negative psychological responses in the COVID-19 situation. Among them, we found that techno-overload maintain the most significant influence. It is due to the lack of instant feedback on workload allocations in telework and the lack of adjustment period with the sudden shift to telecommuting. In the case of techno-complexity, employees seem to experience difficulty acquiring new technical skills. Finally, the techno-invasion came out significant, signifying the infiltration of working space by home-related activities. The emotion-focused coping strategy had a moderating effect. In contrast, the problem-focused coping strategy had no significant effect, indicating that an appropriate emotional coping strategy is more important for workers undergoing extreme changes in the work environment. Subsequently, practical and theoretical implications, limitations, and future research directions are discussed.

• Geomechanics and Engineering
• /
• v.27 no.5
• /
• pp.511-525
• /
• 2021

In the design of underground excavation, the shear strength (SS) is a key characteristic. It describes the way the rock material resists the shear stress-induced deformations. In general, the measurement of the parameters related to rock shear strength is done through laboratory experiments, which are costly, damaging, and time-consuming. Add to this the difficulty of preparing core samples of acceptable quality, particularly in case of highly weathered and fractured rock. This study applies rock index test to the indirect measurement of the SS parameters of shale. For this aim, two efficient artificial intelligence methods, namely (1) adaptive neuro-fuzzy inference system (ANFIS) implemented by subtractive clustering method (SCM) and (2) support vector regression (SVR) optimized by Harmony Search (HS) algorithm, are proposed. Note that, it is the first work that predicts the SS parameters of shale through ANFIS-SCM and SVR-HS hybrid models. In modeling processes of ANFIS-SCM and SVR-HS, the results obtained from the rock index tests were set as inputs, while the SS parameters were set as outputs. By reviewing the obtained results, it was found that both ANFIS-SCM and SVR-HS models can provide acceptable predictions for interlocking and friction angle parameters, however, ANFIS-SCM showed a better generalization capability.

• Journal of the Korean Society of Visualization
• /
• v.22 no.1
• /
• pp.79-84
• /
• 2024

As microchips' degree of integration is getting higher, its cooling problem becomes important more than ever. One of the promising methods is using fractal microchannel heat sink by mimicking nature's Murray networks. However, most of the related works have been progressed only by numerical analysis. Perhaps such lack of direct experimental studies is due to the technical difficulty of the temperature and heat flux measurement in complex geometric channels. Here, we demonstrate the direct visualization of in situ temperature profile in a fractal microchannel heat sink. By using the temperature-sensitive fluorescent dye and a transparent Polydimethylsiloxane window, we can map temperature profiles in silicon-based fractal heat sinks with various fractal scale factors (a=1.5-3.5). Then, heat transfer rates and pressure drops under a fixed flow rate were estimated to optimize hydrodynamic and thermal characteristics. Through this experiment, we found out that the optimal factor is a=1.75, given that the differences in heat transfer among the devices are marginal when compared to the variances in pumping power. This work is expected to contribute to the development of high-performance, high-efficiency thermal management systems required in various industrial fields.

• Journal of Engineering Education Research
• /
• v.7 no.2
• /
• pp.5-21
• /
• 2004

The study aims to propose plans to give credit approval to those who obtain authorized civil qualifications, in accordance with the enforcement regulations under the Clause 7, Article 4 of $\ulcorner$the law on credit approval and others$\lrcorner$. Preceding studies on the grounds and principles of credit approval, analyses on the related references and materials, and surveys asking the managers of authorized civil qualifications their opinion over giving credit approval to authorized civil qualifications were conducted as the methodology of this study. Besides, a conference inviting experts from the relevant fields was held to specifically overview the contents and levels to be examined by qualification items, to conduct a face-to-face survey on directions to take in the credit approval of authorized civil qualifications, and to analyze the level and the degree of the difficulty of questions in the examinations of authorized civil qualifications. The contents and the level of credit approval in this study are as follows. For the authorized civil qualification items unable to formulate criteria in accordance with the principles of credit approval taken in the national technique qualification and other national qualifications, two factors were put under consideration for setting the level of the credit approval. First, the level and scope of work were investigated. Second, the content of qualification was compared with the course work of college. The degree of difficulty in the scope and performance of work was reviewed by specialized qualification and general qualification, respectively. Specialized qualification indicates whether or not the required knowledge and technique are acquired for performing duty in specific work fields. It falls into service fields and qualification items except qualification items on general clerical work of the national technique qualification and other national qualifications. To the contrary, general qualification is to prove the degree of acquisition of knowledge and technique for improving the basic competencies throughout diverse types of occupations. It includes competencies to verify language proficiency, mathematical and statistical capacity, problem settlement, negotiation and communication skills. When the authorized civil qualification came under the specialized qualification, the level of qualification was determined in comparison with the level of work of national qualifications. In the case of the general qualification, the credit to be approved was settled by conducting a comparative analysis on the course work of college.

• Cartoon and Animation Studies
• /
• s.15
• /
• pp.165-178
• /
• 2009

Everybody recognizes importance of characters in theater animation that directly influence audiences through narrative structure. However, it is very difficult to make one. This study is about this process that creates characters. This study derived what common points were involved in analysis data of major/supporting characters' formative characteristics in various studies related to animation characters. Then, based on the data, this study analyzed how major/supporting characters were transformed to animation characters in the scenes that were animated at the beginning and end of film that were released in 2007. Finally, this study investigated the process of character creation using portrait based on the analyzed data. Although this study tried to approach to character creation objectively using objective data rather than subjective judgment of the researcher, the researcher recognizes that subjective thoughts could not be completely excluded since it is done by man's hands. However, this author sincerely hopes that this research can be a great help in producing animation characters through understanding form factors of images that makes character for short film producers who suffered from slow work process due to difficulty in creating characters or authors who failed to complete satisfactory work as they could not find slight difference in character modification.

• Journal of Families and Better Life
• /
• v.27 no.6
• /
• pp.111-124
• /
• 2009

The purpose of this study is first to examine the tendency in what kinds of activities are carried out as family rituals; what kinds of obstacles there are; and why any problems, if any, tend to arise. Second, the study seeks to discern the relationship between family rituals and wives' marital satisfaction. For this purpose, the study surveyed 251 wives who had fourth, fifth, or sixth grade children and resided in Busan, and then analyzed the data obtained from the survey. The major findings of this study can be summarized as follows: (1) Regarding the dinner ritual, it turned out that a majority of subjects had a difficult time establishing a regular ritual due to 'their busy schedule at work' and 'children's studying at academies'. For the weekend leisure ritual, in the case of difficulty in spending this kind of time it tended to be because of the wives' 'busy schedules at work' and 'lack of mutually available time for all family members'. In birthday rituals, when wives reported having trouble with her family members regarding birthdays, they explained that this was most often' because family members forget their birthday'. Finally, when the subjects reported problems related to tradition rituals, it was mainly because of 'stress from the burden of housework (2) In every dimensions including occurrence, routine, deliberateness, attendance, affect, and symbolic significance, the top-ranked group showed a high degree of satisfaction in their marriage.

• Physical Therapy Korea
• /
• v.19 no.3
• /
• pp.91-97
• /
• 2012

The primary aim of this study was to compare responsiveness of self-report by worker and therapist-scored functional capacity instrument. Self-report and therapist-scored interval-level person measures and item difficulties were compared at admission and discharge. Therapist and worker ratings were collected on 230 clients from 27 rehabilitation sites using the newly developed Occupational Rehabilitation Data Base (ORDB) functional capacity instrument. ORDB comprises several subscales measuring relevant variables of "a return-to-work model" in work-related rehabilitation clinics. The functional capacity scale deals with 10 DOT job factors. The rating scale categories were 1-severely impaired, 2-moderately impaired, 3-mildly impaired, and 4-not impaired. Only data from clients with low back pain (n=98) with complete data (both admission and discharge scores) were used for the present study. Therapists and workers completed the functional capacity instrument at admission and discharge. Rasch analysis [1-parameter item response theory model (IRT)] was applied to calibrate item difficulty and person ability measure of therapist and workers ratings. Effect sizes for therapist and self-report ratings were slightly different, .69 and .30, respectively. Therapist and worker ratings were more consistent at discharge (r=.54) than at admission (r=.32). Workers have a tendency to be more severe in their ratings (show higher item difficulties) than therapists at admission and discharge. Therapists and workers report similar magnitudes of improvement following treatment program. These findings challenge the belief that injured workers may unreliable source for monitoring therapeutic outcomes. Self-report measures have the advantage of conserving therapist time for treatment (versus evaluation). While the therapist and self-report ratings are comparable at discharge, there is less consistency at admission. Comparable therapist-worker ratings may be achieved by controlling for rating severity using IRT methodologies.