• 대한화학회지
• /
• 제8권2호
• /
• pp.88-91
• /
• 1964

모나자이트中의 스칸디움含量을 더욱 簡便히 決定할 수 있도록 改良한 放射化分析法을 記述하였다. 즉 熱中性子束($10^{12}n/cm^2/sec$)에 照射된 試料에 스칸듐擔體와 黃酸을 넣고 加熱融解한 後 물로 稀釋한 試液에 암모니아水를 加하여 稀土類元素를 沈澱分離하였다. 沈澱을 鹽酸에 녹힌 다음 티오시안酸암모늄을 넣어 스칸듐을 에테르로 抽出하였다. 스칸듐의 化學的 回收率은 스칸듐을 만델린酸으로 沈澱시켜서 重量分析法에 依하여 決定하였다. 本分離法에 依한 스칸듐의 分離能과 共存元素의 放射能의 妨害與否는 이온交換樹脂를 使用하여 스칸듐을 分離한 結果와 比較檢討하였다. 스칸듐의 放射能은 Gamma-scintillation spectrometry 에 依하여 計測하였고 韓國産 모나자이트에는 約 12 p.p.m.의 스칸듐의 含有되어 있음을 알았다.

• Safety and Health at Work
• /
• 제8권1호
• /
• pp.11-18
• /
• 2017

The purpose of this review is to name and describe the important factors of musculoskeletal strain originating from pushing and pulling tasks such as cart handling that are commonly found in industrial contexts. A literature database search was performed using the research platform Web of Science. For a study to be included in this review differences in measured or calculated strain had to be investigated with regard to: (1) cart weight/ load; (2) handle position and design; (3) exerted forces; (4) handling task (push and pull); or (5) task experience. Thirteen studies met the inclusion criteria and proved to be of adequate methodological quality by the standards of the Alberta Heritage Foundation for Medical Research. External load or cart weight proved to be the most influential factor of strain. The ideal handle positions ranged from hip to shoulder height and were dependent on the strain factor that was focused on as well as the handling task. Furthermore, task experience and subsequently handling technique were also key to reducing strain. Workplace settings that regularly involve pushing and pulling should be checked for potential improvements with regards to lower weight of the loaded handling device, handle design, and good practice guidelines to further reduce musculoskeletal disease prevalence.

• 반도체디스플레이기술학회지
• /
• 제10권2호
• /
• pp.39-44
• /
• 2011

In this study, we have investigated the structural and electrical characteristics of IZO thin films deposited on flexible substrate for the OLED (organic light emitting diodes) devices. For this purpose, PES was used for flexible substrate and IZO thin films were deposited by RF magnetron sputtering under oxygen ambient gases (Ar, $Ar+O_2$) at room temperature. In order to investigate the influences of the oxygen, the flow rate of oxygen in argon mixing gas has been changed from 0.1sccm to 0.5sccm. All the samples show amorphous structure regardless of flow rate. The electrical resistivity of IZO films increased with increasing flow rate of $O_2$ under $Ar+O_2$. All the films showed the average transmittance over 85% in the visible range. The OLED device was fabricated with different IZO electrodes made by configuration of IZO/a-NPD/DPVB/$Alq_3$/LiF/Al to elucidate the performance of IZO substrate. OLED devices with the amorphous-IZO (a-IZO) anode film show better current density-voltage-luminance characteristics than that of OLED devices with the commercial crystalline-ITO (c-ITO) anode film. It can be explained that very flat surface roughness and high work function of a-IZO anode film lead to more efficient hole injection by reduction of interface barrier height between anode and organic layers. This suggests that a-IZO film is a promising anode materials substituting conventional c-ITO anode in OLED devices.

• The Korean Journal of Physiology
• /
• 제2권2호
• /
• pp.45-52
• /
• 1968

Maximal oxygen uptake was measured in twenty-eight middle-aged men aged 45.0 (range: 40.3-50.7) years and fourteen middle-aged women aged 40.5 (range: 34.3-47.5) years by means of a treadmill test. The physique of subjects were:mean skinfold thickness at 4 sites, namely, back, arm, waist and abdomen was 7.59 mm in men and 14.5 mm in women; total body fat estimated from the mean skinfold thickness, 11.9% fat in men and 25.5% fat in women. The detailed observations are as follows: 1. Maximal oxygen uptake expressed on any reference unit in men was greater than that of women. The values of men to women were: 2.61 to 1.92l/min., 45.1 to 37.0 ml/min./kg, 51.8 to 46.5 ml/min./kg lean body mass (LBM), 15.7 to 12.6 ml/min./cm body height. 2. Maximal pulmonary ventilation in men was 80.2 l/min. and 63.5 l/min. in women. 3. There was a correlation of fairly high degree between maximal oxygen uptake and body weight, namely, r=0.56 in men and r=0.79 in women. The correlation between maximal oxygen uptake and lean body mass also was fairly high, namely, r=0.58 in men and r=0.69 in women. 4. The correlation between maximal pulmonary ventilation and body weight or lean body mass was r=0.51 and r=0.25 in middle-aged men and r=0.41 and r=0.19 in middle-aged women, respectively. 5. Maximal heart rate in men was 176.4 beat/min. and it was 183.9 beat/min. in women. 6. Maximal oxygen pulse in men was 14.6 ml/beat and 9.5 ml/beat in women. 7. Aerobic work capacity of korean middle-aged men and women maintained the same level as that of young men and women, respectively, as shown by maximal oxygen uptake expressed ml/min./kg or ml/min./kg lean body mass.

• 한국운동역학회지
• /
• 제20권4호
• /
• pp.387-393
• /
• 2010

The purpose of this study was to compare pregnant women's gait parameters and mechanical energies caused by changes in hormone levels and anatomical features such as body mass, body-mass distribution, joint laxity, and musculo-tendinous strength from pregnancy to postpartum. Ten subjects (height: $161{\pm}6.5cm$, mass: $62.7{\pm}10.4\;kg$, $66.4{\pm}9.3\;kg$, $68.4{\pm}7.7\;kg$, $57.2{\pm}7.7\;kg$) participated in the four times experiments (the first, middle, last term and after birth) and walked ten trials at a self-selected pace without shoes. The gait motions were captured with Qualisys system and gait parameters were calculated with Visual-3D. Pregnant women's gait velocities were decreased during the pregnancy periods, but increased after birth. Stride width and cycle time were increased during pregnancy, but decreased after birth. Thigh energy (77.4%) was greater than shank energy (19.06%) or feet (3.54%) about total energy of the lower limbs. Their feet (Left R2=0.881, Right R2=0.852) and shank (Left R2=0.318, Right R2=0.226) energies were significantly increased (positive correlation), but double limb stance time (DLST, R2=0.679) and body total energy (R2=0.138) were decreased (negative correlation) for their velocities. These differences suggest that thigh segment may be a dominant segment among lower limbs, and have something to do with gait velocities. Further studies should investigate joint power and joint work to find energy dissipation or absorption from pregnancy period to postpartum.

• 반도체디스플레이기술학회지
• /
• 제9권3호
• /
• pp.53-58
• /
• 2010

In this study, we have investigated the effect of the ambient gases on the characteristics of IZO thin films for the OLED (organic light emitting diodes) devices. For this purpose, IZO thin films were deposited by RF magnetron sputtering under various ambient gases (Ar, $Ar+O_2$ and $Ar+H_2$) at $150^{\circ}C$. In order to investigate the influences of the oxygen and hydrogen, the flow rate of oxygen and hydrogen in argon mixing gas has been changed from 0.1sccm to 0.5sccm, respectively. All the samples show amorphous structure regardless of ambient gases. The electrical resistivity of IZO film increased with increasing flow rate of $O_2$ under $Ar+O_2$ while under $Ar+H_2$ atmosphere the electrical resistivity showed minimum value near 0.5sccm of $H_2$. All the films showed the average transmittance over 85% in the visible range. The OLED device was fabricated with different IZO substrates made by configuration of IZO/${\alpha}$-NPD/DPVB/$Alq_3$/LiF/Al to elucidate the performance of IZO substrate. OLED devices with the amorphous-IZO (a-IZO) anode film show better current densityvoltage-luminance characteristics than that of OLED devices with the commercial crystalline-ITO (c-ITO) anode film. It can be explained that very flat surface roughness and high work function of a-IZO anode film lead to more efficient hole injection by reduction of interface barrier height between anode and organic layers. This suggests that a-IZO film is a promising anode materials substituting conventional c-ITO anode in OLED devices.

• Safety and Health at Work
• /
• 제12권4호
• /
• pp.511-516
• /
• 2021

Background: Difficulties in walking and balance are risk factors for falling. This study aimed to predict dynamic balance based on demographic information and anthropometric dimensions in construction workers. Methods: This descriptive-analytical study was conducted on 114 construction workers in 2020. First, the construction workers were asked to complete the demographic questionnaire determined in order to be included in the study. Then anthropometric dimensions were measured. The dynamic balance of participants was also assessed using the Y Balance test kit. Dynamic balance prediction was performed based on demographic information and anthropometric dimensions using multiple linear regression with SPSS software version 25. Results: The highest average normalized reach distances of YBT were in the anterior direction and were 92.23 ± 12.43% and 92.28 ± 9.26% for right and left foot, respectively. Both maximal and average normalized composite reach in the YBT in each leg were negatively correlated with leg length and navicular drop and positively correlated with the ratio of sitting height to leg length. In addition, multiple linear regressions showed that age, navicular drop, leg length, and foot surface could predict 23% of the variance in YBT average normalized composite reach of the right leg, and age, navicular drop, and leg length could predict 21% of that in the left leg among construction workers. Conclusion: Approximately one-fifth of the variability in the normalized composite reach of dynamic balance reach among construction workers using method YBT can be predicted by variables age, navicular drop, leg length, and foot surface.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.624-637
• /
• 2019

A semi-submersible offshore platform always operates under complex weather conditions, especially wind and waves. It is vital to analyze the structural dynamic responses of the platform in short-term sea states under the combined wind and wave loads, which touches upon three following work. Firstly, a derived relationship between wind and waves reveals a correlation of wind velocity and significant wave height. Then, an Improved Mixture Simulation (IMS) method is proposed to simulate the time series of wind/waves accurately and efficiently. Thus, a wind-wave scatter diagram is expanded from the traditional wave scatter diagram. Finally, the time series of wind/wave pressures on the platform in the short-term sea states are converted by Workbench-AQWA. The numerical results demonstrate that the proposed numerical methods are validated to be applicable for wind and wave simulations in structural analyses. The structural dynamic responses of the platform members increase with the wind and wave strength. In the up-wind and wave state, the stresses on the deck, the connections between deck and columns, and the connection between columns and pontoons are relatively larger under the vertical bending moment. These numerical methods and results are wished to provide some references for structural design and health monitoring of several offshore platforms.

• 한국산림과학회지
• /
• 제95권4호
• /
• pp.483-494
• /
• 2006

테다소나무 7-1037 클론에서 얻은 반형매 풍매 차대의 반수체 DNA에 대해 AFLP 표지자 분석을 수행하여 유전연관지도를 작성하고, 6년생 때의 수고 및 흉고직경 생장에 대한 QTL mapping을 수행하였다. 121개 AFLP 표지자로 전체 연관거리 1,869 cM, marker간 평균거리 18.5 cM의 20개 framework map을 작성하였다. Composite interval mapping 방법에 의해 수고 생장의 전체 표현형 변이의 5.9%를 설명할 수 있는 l개의 QTL과 흉고직경 생장 변이의 3.9~5.6%를 설명할 수 있는 3개의 QTL을 동정하였으며, QTL 간의 상호작용 효과는 없었다. 수고 생장에 대한 QTL의 유전적 효과는 39.6cm이었고, 흉고직경 생장에서는 7.20~9.41 mm인 것으로 추정되었다. 상기 QTL들과 가장 가깝게 연관되어 있는 표지자를 이용하여 대립유전자 치환의 평균효과(average effect of gene substitution)를 산출한 결과, 수고생장에서는 44.3 cm, 흉고직경 생장에서는 8.38~11.81 mm이었다. 테다소나무의 생장에 대한 가계내 개체유전력을 0.2 이하로 가정한다면, 본 연구에서 확인된 QTL은 7-1037 클론의 반형매 풍매 차대가 보유한 상가적 유전분산의 26.8%를 설명할 수 있어 표현형에 의한 개체선발보다 선발효율에서 5배나 높은 것으로 추정되었다. 본 연구에서 제시된 반형매 풍매 차대를 이용한 QTL mapping 분석은 채종원을 기반으로 하는 선발육종 사업에서 필요한 breeding value 등의 정보를 제공한다는 측면에서 인공교배 가계를 이용한 기타의 QTL 분석에 비해 보다 현실적이고 적용성이 높은 방법론이라 생각된다.

• 대한토목학회논문집
• /
• 제28권5B호
• /
• pp.485-493
• /
• 2008

한반도 영역을 대상으로 RDAPS모형의 수치예보자료, AWS의 관측강수, 상층기상관측(upper-air sounding)의 관측자료를 이용하여 권역별 강수발생확률을 예측할 수 있는 인공신경망 모형을 제시하였다. 사용된 자료의 기간은 2001년 7, 8월과 2002년 6월로 홍수기를 대상으로 하였다. 500/750/1000 hPa에서의 지위고도, 500-1000 hPa에서의 층후(thickness), 500 hPa에서의 X와 Y방향 바람성분, 750 hPa에서의 X와 Y방향 바람성분, 표면풍속, 500/750 hPa/표면에서의 온도, 평균해면기압, 3시간 누적 강수, AWS관측소에서 관측된 RDAPS모형 실행전의 6시간과 12시간동안의 누적강수, 가강수량, 상대습도등을 신경망의 예측인자로 사용하였다. 신경망의 구조는 3층 MLP(Multi Layer Perceptron)로 구성하여 역전파알고리즘(Back-propagation)을 학습방법으로 사용하였다. 신경망예측결과 한반도전체에 대한 예측성과의 개선은 H가 6.8%상승하였고, 특히 TS와 POD는 각각 99.2%와 148.1% 상승함으로서 강수예측에 대한 신경망모형이 효과적인 도구가 될 수 있음을 확인하였다. KSS 역시 92.8% 개선됨으로서 RDAPS 예측에 비하여 뚜렷이 개선된 결과를 보여주고 있다.