• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.11
• /
• pp.1519-1523
• /
• 2005

By screening a subtracted cDNA library constructed with mRNA obtained from the longissimus dorsi muscles of F1 hybrids Landrace${\times}$Yorkshire and their Yorkshire female parents, we isolated two partial sequences coding for the H3-K4-specific methyltransferase (KIAA1717) and skeletal muscle myosin regulatory light chain (HUMMLC2B) genes. In the present work we investigated two SNPs, one (C1354T) at the 3' untranslated region (UTR) of KIAA1717 and one (A345G) at the SINE (PRE-1) element of HUMMLC2B, in a resource population derived from crossing Chinese Meishan and Large White pig. The selected pigs were genotyped by means of a PCR-RFLP protocol. Significant associations were observed for the KIAA1717 C1354T polymorphic site with thorax-waist backfat thickness (p<0.05), buttock backfat thickness (p<0.05), average backfat thickness (p<0.05), loin eye height (p<0.05), loin eye area (p<0.05), carcass length to 1$^{st}$ spondyle (p<0.01) and carcass length to 1st rib (p<0.01). HUMMLC2B A345G were significantly associated with loin eye width (p<0.05), loin eye area (p<0.05). Further studies are needed to confirm these preliminary results.

• Journal of Biosystems Engineering
• /
• v.10 no.1
• /
• pp.13-23
• /
• 1985

Spraying method from the paddy-field levee is known to give insufficient penetration of the spray droplets to the rice stem of the densely grown plants, which is generally encountered at the last stage of rice growth. This study was intended to investigate the spraying system to solve this existing problem. As an approach, it was attempted to develop the boom-with-nozzle, between-the-row application system. Several types of nozzles and their different arrangements in the boom were tested in the field to measure the penetration-reaching distance and the uniformity of spray droplet distribution. The results of the study are summarized as follows: 1. Field experiments by the spraying method from the paddy-field levee showed to have practically no penetration of the spray droplets to the portion of the plant stem with the normal flow volume generally applied and thus need for improving present spraying method. 2. It was found that, considering both the uniformity of the spray droplet distribution and performance rate, the most efficient type of nozzle in the between-the-row boom-type spraying system was one that has core-insert hollow-cone with some clearance between the cone and tip. 3. When tested by applying the spraying method of between-the-row, the nozzle pressure did not affect the uniformity of spray droplet distribution. However, the nozzle pressure had a positive effect on the penetrating-reaching distance of the facing side of the rice stem and did not affect much on that of the opposite face of the stem. It was also found that the maximum pressure to affect the penetration-reaching distance was about $10kg/cm^2$. 4. The uniformity of the spray droplet distribution in the between-the-row system was greatly affected by the height and orientation of the nozzles in the boom. Based on experimental work for the different type of the boom-with-nozzle arrangements, it is recommended that the position of nozzle is set at about 0.45 m above the ground and two nozzles in the boom are oriented to be faced with each other with some angle such that the droplet stream from the nozzle would not directly face with each other.

• Journal of architectural history
• /
• v.10 no.3 s.27
• /
• pp.45-60
• /
• 2001

The Tongdo temple have been transformed continuously since its first establishment about 1300 years ago. Nevertheless three critical elements specified by 'Jajangyulsa', founder of the temple have not varied over the times but rather strengthened and strongly combined. All elements and doctrines of the religion coexist and form a harmony within the whole of the temple. This researcher examined what changes, or combinations, in spatial formation were sought for such unique structures of the Tongue temple by focusing mainly on the Sangrojun area of the temple to obtain the following findings. First. unlike a work by a Japanese researcher 'Sekino Tadashi', the east yard of the main building was found located on the section line which corresponded to the separation line of Yungkuncheokdo(營建尺度=measure running) from the edge of the Keumkangkyedan(金剛戒壇 =Buddhist platform) embankment to the corner column of the Kamrodang. This was confirmed as a result of the review of photos shown in [Chosun Kojukdobo]. Second, the number of stairs used for the Keumkangkyedan was thought to become three when the temple was firstly restored in 1379 as a result that this researcher reviewed Chinese literature 'DoSun' and [Kyedandokyung(戒壇圖經)], records by 'Lee saek' and 'Jung Shihan', studies of Yungkun measure and actual changes in the temple. Then the temple was forth restored in 1705 when the second of the stairs was changed in area and height and at the same time grounded hard for a space for a Buddhist service. Third, the roof of the main building was probably changed in shape during the Koryo period when the plane structure, furnish arrangement, emphasized front, stone lanterns of the building and political factors of that time were all considered. Fourth, the main building was Initially designed to provide a Buddhist sermon service which was assumedly followed by a similar service at a Keumkangkyedan. Thus the main building had a small window on the northern side which might be opened up to look out or otherwise go outside like a door. However, the window was probably locked up like a surrounding wall since the main building was entirely repaired after the end of Japanese invasion of Korea in 1592.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.1
• /
• pp.67-75
• /
• 2011

The present work investigate the effect of sound reinforcement systems on the acoustics of a large dome stadium using a computer simulation. The acoustics of a dome stadium was predicted analyzed by varying room absorption, as well as the configuration of speakers including their directivity, installed height, and numbers. It was found that both D50 and RASTI were improved by increasing room absorption. Larger EDTs were observed according to the increase of room absorption at mid and high frequencies. On the other hand, RT did not show any significant correlation with the changes in room absorption, which might be the effect of a forced linear fitting for non -linear energy decay process. With respect to the speaker configuration, the speech intelligibility of a sound reforcement system installed at higher placed more relied upon their directivity rather than room absorption, Also, lower placing of speakers was found to be effective in decreasing RTs regardless of room absorption.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.5
• /
• pp.356-360
• /
• 2002

The seedlings of yacon (Polymnia sonchifolia Poeppig ＆ Endlicher), which were cuttings, plug seedling (PS), crown bud before sprouting (CBBS), crown bud after sprouting (CBAS), and divided seedling after budding (DSAB) were planted at 70$\times$50 cm planting distance on ridge; that was interow spacingintrarow spacing, and about 28,500$\pm$71 plants/ha. CBBS didn't need work and equipment to raise seedlings. PS and DSAB grew taller to 140.5 and 143.3cm, respectively, than others at 150 days after planting. In the changes of plant height, PS and DSAB showed taller than others during growth period, cuttings, CBBS, and CBAS grew rapidly in middle growth stage. Excepting main stem and petiole length, other characters were significant for seedling. Fresh weights were different among seedlings. Even though the yield of plants grown from CBAS and CBBS were lower with 34.7 and 36.4 ton/ha, respectively, than 3.6 ton/ha of DSAB; its yield index were over 95%, hence, those of plants grown from cutting and PS were lower with 73 and 87%, respectively. The ratio of tuberous roots over 200g to total tuberous roots per plant was the highest from DSAB. Most of tuberous roots were under 200g per tuberous root from cuttings. CBBS, CBAS, and DSAB are suitable to use seedlings for high yield of yacono. Yacon plant by DSAB much produced tuberous root of over 200g.

• Safety and Health at Work
• /
• v.11 no.3
• /
• pp.307-313
• /
• 2020

Background: Many tasks in industrial and health care setting are involved with pushing and pulling tasks up or down on a ramp. An efficient method of moving cart which reduces the risk of low back pain should be concerned. This study aimed to investigate the effects of handling types (HTs) and slope on lumbar spinal load during moving a cart on a ramp. We conducted a 2 × 2 × 4 factorial design with three main factors: 2 HTs, 2 handling directions of moving a cart and 4 degrees of ramp slope. Methods: Thirty healthy male workers performed 14 tasks consist of moving a cart up and down on the ramp of 0°, 10°, 15°, and 20° degrees with pushing and pulling methods. Joint angles from a 3D motion capture system combined with subject height, body weight, and hand forces were used to calculate the spinal load by the 3DSSPP program. Results: Our results showed significant effect of HT, handling directions and slope on compression and shear force of the lumbar spine (p < 0.001). When the ramp gradient increased, the L4/5 compression forces increased in both pushing and pulling (p < 0.001) Shear forces increased in pulling and decreased in pushing in all tasks. At high slopes, pulling generated more compression and shear forces than that of pushing (p < 0.01). Conclusion: Using the appropriate technique of moving a cart on the ramp can reduce the risk of high spinal load, and the pushing is therefore recommended for moving a cart up/down on ramp gradients.

• Journal of Sericultural and Entomological Science
• /
• v.2
• /
• pp.63-71
• /
• 1962

This work was to develope a more simple producing method of mulberry seedling with lower cost than the normal grafting method and the conclusions were found as; 1. There was no difference for the production of the seedling root when the young mulberry branch was graved in soil at the time it grown as 60∼80cm height. 2. It was found that the best result was obtained in case of 15 to 20 young branches of a mulberry shoot were graved instead of whole of them. 3. The seedling root quality of the clay soil graved was found better than the sand soil used, but root producing quantity was found as the same. 4. The fertilizing at the time of the young branch graving was not effective and also the continual fertilizing seemed not to be effective. 5. The seedlings root production was found that Kairyo Nezumigaeshi was best and Ichihei, Suwon Daeyop, Shimano-Uchi, Suwon No.3 and Suwon No.4 were followed of it. But Rosoh was found as poor. Morus alba L. was found as a better Species than Morus Lhou(Ser) Koidz and Morus bombycis Koidz for the production of the seedling root and its quality.

• Korean Journal of Materials Research
• /
• v.27 no.1
• /
• pp.48-52
• /
• 2017

In this study, we used I-V spectroscopy, photoconductivity (PC) yield and internal photoemission (IPE) yield using IPE spectroscopy to characterize the Schottky barrier heights (SBH) at insulator-semiconductor interfaces of Pt/$HfO_2$/p-type Si metal-insulator-semiconductor (MIS) capacitors. The leakage current characteristics of the MIS capacitor were analyzed according to the J-V and C-V curves. The leakage current behavior of the capacitors, which depends on the applied electric field, can be described using the Poole-Frenkel (P-F) emission, trap assisted tunneling (TAT), and direct tunneling (DT) models. The leakage current transport mechanism is controlled by the trap level energy depth of $HfO_2$. In order to further study the SBH and the electronic tunneling mechanism, the internal photoemission (IPE) yield was measured and analyzed. We obtained the SBH values of the Pt/$HfO_2$/p-type Si for use in Fowler plots in the square and cubic root IPE yield spectra curves. At the Pt/$HfO_2$/p-type Si interface, the SBH difference, which depends on the electrical potential, is related to (1) the work function (WF) difference and between the Pt and p-type Si and (2) the sub-gap defect state features (density and energy) in the given dielectric.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.3
• /
• pp.454-464
• /
• 1987

The objective of this research is to analyze and evaluate the dynamic flow curve of metals under impact loading at both high strain rate (.epsilon.=1/h dh/dt > 10$\^$3/m/s/m) and large strain (.epsilon.=In h/h$\_$0/ > 1.0). A test method for dynamic compression of metal disc is described. The velocity of the striker face and the force on the anvil are measured during the impact period. From these primitive data the axial stress, strain, and strain rate of the disc are obtained. The Strain rate is determined by the striker velocity divided by the specimen height. This gives a slightly increasing strain rate over most of the deformation period. Strain rates of 100 to 10,000 per second are achieved. Attainable final strains are 150%. A discussion of several problem areas is presented. The friction on the specimen surfaces, the determination of the frictional coefficient, the influence of the specimen geometry (h$\_$0//d$\_$0/ ratio) on the friction effect, the lock-up condition for a given configuration, the friction correction factor, and the evaluation of several lubricants are given. The flow function(stress verus strain) is dependent on the material condition(e.g., prior cold work), specimen geometry, strain rate, and temperature.

• Electrical & Electronic Materials
• /
• v.8 no.5
• /
• pp.619-625
• /
• 1995

Polycrystalline CdTe thin film has been studied for photovoltaic application due to the 1.45 eV band gap energy ideal for solar energy conversion and high absorption coefficient. The formation of low resistance contact to p-CdTe is difficult because of large work function(>5.5eV). Common methods for ohmic contact to p-CdTe are to form a p+ region under the contact by in-diffusion of contact material to reduce the barrier height and modify a p-CdTe surface layer using chemical treatment. In this study, the surface chemical treatment of p CdTe was carried out by H$\_$3/PO$\_$4/+HNO$\_$3/ or K$\_$2/Cr$\_$2/O$\_$7/+H$\_$2/SO$\_$4/ solution to provide a Te-rich surface. And various thin film contact materials such as Cu, Au, and Cu/Au were deposited by E-beam evaporation to form ohmic contact to p-CdTe. After the metallization, post annealing was performed by oven heat treatment at 150.deg. C or by RTA(Rapid Thermal Annealing) at 250-350.deg. C. Surface chemical treatments of p-CdTe thin film improved metal/p-CdTe interface properties and post heat treatment resulted in low contact resistivity to p-CdTe.Of the various contact metal, Cu/Au and Cu show low contact resistance after oven and RTA post-heat treatments, respectively.