• 제목/요약/키워드: work interference

검색결과 326건 처리시간 0.023초

최대 수명을 갖는 AODV 라우팅 프로토콜 실험 설계 (Experimental Design of AODV Routing Protocol with Maximum Life Time)

  • 김용길;문경일
    • 한국인터넷방송통신학회논문지
    • /
    • 제17권3호
    • /
    • pp.29-45
    • /
    • 2017
  • 애드 혹 센서 네트워크는 분산형 구조와 구축으로 특징지어지며 센서 네트워크는 낮은 이동성과 엄격한 에너지 요구 조건 등을 제외하고는 애드 혹 네트워크의 기본적인 특징을 모두 갖추고 있다. 기존 프로토콜은 내결함성, 분산 컴퓨팅, 견고성, 확장성 및 신뢰성과 같은 특성 간에 서로 다른 보완성을 제공한다. 지금까지 제안된 무선 프로토콜은 매우 제한되어있어 일반적으로 단일 기지국 또는 센서 데이터 수집에 중점을 두었다. 그러한 제약을 가지는 주된 이유는 네트워크 활동을 유지하기 위해 최대 수명을 유지하기 때문에 네트워크 수명은 애드 혹 네트워크에서 중요한 설계 기준이며 모든 노드가 라우터 역할을 수행하여 에너지 부족인한 일부 노드가 동작하지 않으면 다른 노드로 통신할 수 없다. 본 논문에서는 네트워크 노드의 에너지 통신을 최적화하기 위한 실험적인 애드 혹 주문형 거리 벡터 라우팅 프로토콜을 제안 한다 부하 분산은 경로 선택 단계에서 소진된 노드의 선택을 피하고 노드 간 에너지 사용의 균형을 유지하고 네트워크 수명을 극대화한다. 전송 제어 단계에서는 신호 전송 범위를 증가시키는 높은 전송 전력의 선택과 홉 수를 줄이고 네트워크 연결 비용의 부담을 줄이는 낮은 전력 수준 사이의 균형이 필요하다.

12주간의 수중운동이 노인 골관절염 환자의 동적평형성과 통증요인에 미치는 영향 (The Effect of 12-weeks Aquatic Exercise on Dynamic Balance and Pain Factors in Elderly Osteoarthritis Patients)

  • 임순영;어수주;김송준;허성훈;안경준;이장규;이종삼
    • 한국산학기술학회논문지
    • /
    • 제17권2호
    • /
    • pp.601-609
    • /
    • 2016
  • 본 논문은 관절염을 앓고 있는 노인여성(환자군; $65.25{\pm}5.9$세, 11명)과 일반 노인여성(통제군; $64.50{\pm}7$세, 11명)을 대상으로 12주간의 수중운동(주 3회)을 실시 한 후 동적평형성과 통증(통증자각도)의 변화를 알아보고자 실시되었다. 동적평형성은 시각정보의 유무에 따라 개안 시와 폐안 시로 나누어 측정하였다. 12주간의 수중운동에 따른 개안 시 동적평형성은 관절염 환자군(p<.001)과 통제군(p<.05)에서 유의하게 향상되었고, 폐안 시 관절염 환자군에서도 유의하게 향상된 결과를 보였다(p<.05). 또한, 통증자각도(VAS) 평가에 의한 통증 변화는 관절염 환자군의 10요인(푹신한 의자에 똑바로 앉아있기 힘든가, p<.01), 11요인(누워있을 때 통증이 덜해지는가, p<.05), 12요인(통증때문에 일상생활에 지장이 있는가, p<.05), 13요인(통증 때문에 직장일 또는 집안일에 지장이 있는가, p<.01)에서 유의한 통증 감소가 나타났다. 본 연구 결과를 통해 12주간의 수중 운동은 골관절염 노인 환자에게 개안 시와 폐안 시 모두 동적평형 능력을 향상 시키고, 일부 통증요인 감소에 효과적인 운동임을 알 수 있었다.

DGNSS 위치정확도 향상을 위한 PRC 보정정보 모델링에 관한 연구 (A Study on Pseudo-Range Correction Modeling in order to Improve DGNSS Accuracy)

  • 손동효;박관동
    • 대한공간정보학회지
    • /
    • 제23권4호
    • /
    • pp.43-48
    • /
    • 2015
  • 본 논문은 DGNSS(Differential GNSS) 위치정확도 향상을 위한 PRC(Pseudo-Range Correction) 보정정보 모델링에 관한 연구내용이다. PRC는 DGNSS 기법을 이용하여 측위정확도를 향상시키기 위해 사용되는 보정정보로써 사용자가 통신망을 통해 수신한 뒤 사용된다. 그러나 일시적인 통신두절이나 신호간섭 등으로 인해 위치정확도가 급격히 저하되는 일이 발생한다. 그래서 본 논문에서는 이러한 현상을 방지하기 위해 PRC 보정정보를 다항식 곡선접합 방정식을 이용하여 모델링하고 그 정확도를 평가하였다. 모델링 매개변수를 이용하여 계산한 PRC 추정값과 실제 기준국 수신기에서 생산되는 관측값간의 차이를 계산한 결과 GPS의 경우에는 평균 0.1m, RMSE는 1.3m로 나타났고 대부분의 위성들이 ${\pm}1.0m$ 이내의 편향오차와 3.0m 이내의 RMSE를 보였다. GLONASS의 경우에는 평균 0.2m이고 대부분 ${\pm}2.0m$ 이내에 분포하였다. RMSE는 2.6m로 나타났고 다수의 위성들이 3.0m 이내에 분포하였다. 이런 결과는 모델링을 통해 산출한 추정값이 사용자의 위치정확도를 유지하는데 유효하게 사용될 수 있음을 보였다. 그러나 고도각이 낮은 영역에서 두 값의 차이가 크게 나타나 이에 대한 연구를 추가적으로 수행할 필요성이 있다.

고대 먹의 특성 분석 (Analysis of Characterization on Ancient Ink Stick)

  • 남태광;신수정;박원규;김병로
    • 보존과학회지
    • /
    • 제28권2호
    • /
    • pp.165-173
    • /
    • 2012
  • 본 연구에서는 고대 먹의 과학적이고 체계적인 분석을 통해 선조들의 조묵방법 및 기술을 파악하는 것이 연구의 목적이다. 고목재와 고문서의 묵서부의 먹을 분석한 결과 다음과 같은 결론을 얻었다. 고목재(창덕궁 신선원전 적심)를 연륜연대분석한 결과 1899년에 벌채된 것으로 나타났으며, 따라서 고목재에 씌어진 먹의 연대를 추정할 수가 있었다. 고대 먹 원료인 그을음의 단일입자크기는 고목재의 경우 평균 107nm로 가장 크게 분석되었고, 12개의 고문서의 경우 38~86nm범위를 나타냈다. 응집체입자크기 분석 결과 고목재의 경우 평균 370nm로 단일입자크기와 같이 가장 크게 분석되었으며, 고문서의 경우 평균 206~318nm로 분석되었고, 단일입자크기와 응집체입자크기 간에는 같은 경향의 분포를 나타내었다. 단일입자크기와 응집체입자크기로 그을음의 원료를 분석할 수가 있을 것으로 생각되었다. 고목재와 고문서 묵서부분의 박편상먹의 적외선 및 라만 분광분석에서는 목재나 종이의 간섭으로 먹 입자의 스펙트럼을 얻을 수 없었다. 고목재에서 분리한 분말먹의 라만 분광분석에서는 현대 송연 그을음과 유사한 라만 스펙트럼패턴을 보여, 송연먹으로 추정할 수 있었다.

한의치료와 '마음의 방 그리기'를 활용한 공황장애 치험 1례 보고 (A Case Report on Panic Disorder Patient Using the 'MRM (Mentalizing the Rooms of Mind)' and Korean Medicine Therapy)

  • 김지수;정문주;이가원;유영수;강형원
    • 동의신경정신과학회지
    • /
    • 제31권3호
    • /
    • pp.197-211
    • /
    • 2020
  • Objectives: The purpose of this study was to introduce the progress of treatment and improve clinical use after conducting Mentalizing the Rooms of Mind, the main technique of Mindfulness & Loving Beingness psychotherapy, for a patient with panic disorder. Methods: We conducted a Mentalizing the Rooms of Mind for 10 sessions on an age 23 female diagnosed with panic disorder based on the DSM-5 diagnostic criteria. After receiving consent from the subject, through chart review, the progress of treatment was observed focusing on the MMPI-2 and CSEI-s (The Core Seven Emotions Inventory-short form) conducted pre- and post-treatment. This study was approved by the Institutional Review Board of Wonkwang University Sanbon Hospital (WMCSB202007-55). Results: 1. The MMPI-2 clinical scales of an age 23 female with panic disorder showed a 7 (Pt)-1 (Hs)-3 (Hy) profile pre-treatment, but for post-treatment, the scale showed 1 (Hs)-3 (Hy) profile, and the 7 (Pt) scale showed significant decline. In the MMPI-2 reconstructed clinical scales, RC7 (Dysfunctional Negative Emotions) and RC8 (Aberrant Experiences) showed significant decline. 2. In the pre- and post-treatment MMPI-2 content scales, Anxiety, Fears, Obsessiveness, Social Discomfort, and Work Interference scores decreased, showing overall positive stability. On the MMPI-2 supplementary scales, the Anxiety and Post-Traumatic Stress Disorder scores decreased, and the Ego Strength increased, resulting in improved overall psychological adaptation. 3. Pre- and post-treatment of an age 23 female with panic disorder, CSEI-s showed significant decline of 恐, 驚, 悲, and 思. So it seems that the emotions caused by Chiljeongsang (七情傷) were more stable than before treatment. Conclusions: As shown above, the treatment of panic disorder through Mentalizing the Rooms of Mind, a major technique of Mindfulness & Loving Beingness psychotherapy, showed positive changes in MMPI-2 as well as improvement of the subjective symptoms. Thus, Mentalizing the Rooms of Mind has high clinical use, and it seems that it is necessary to create a manual for this in the future.

누룽지 생산시설에 대한 미생물학적 오염도 평가 (Evaluation of the Level of microbial Contamination in the Processing Company of Nuroong-ji)

  • 도윤호;최정식;정유경;박지현;노경환;김성수;최신영;이경윤;한의정
    • 한국식품위생안전성학회지
    • /
    • 제25권4호
    • /
    • pp.333-340
    • /
    • 2010
  • 누룽지 제조시설에서 공중낙하균, 작업장 내 시설 및 환경, 제조 종사자, 제조기기 및 주변기구, 원재료, 제조공정별 미생물학적 위해도를 조사하였다. 오염도는 취급하는 재료의 종류와 처리공간의 용도에 따라 차이가 있었다. 원재료를 비롯한 설비와 기구들의 오염은 심각하지 않은 상태이지만 교차오염에 주의할 필요가 있다. 또한 사람의 간섭도가 높은 공정에서 상대적으로 높은 오염도를 나타나 개인위생관리가 중요하다. 누룽지의 제조 공정 중 굽기공정($120{\sim}170^{\circ}C$, 약 10여분)에 의해서 미생물을 억제시킬 수 있기 때문에 굽기공정을 표준화하고 이와 관련된 기구 및 시설에 대한 철저한 관리가 필요하다. 중소규모 식품제조시설에서 미생물학적 오염도 관리를 위해서는 위생시설의 확충도 중요하지만 종사자의 위생에 대한 인식수준을 향상시키는 것이 가장 중요할 것으로 생각된다.

Lower the Detection Limits of Accelerator Mass Spectrometry

  • ;송종한;김준곤;김재열;오종주;김종찬
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.243-244
    • /
    • 2013
  • Over the past 15 years, several groups have incorporated radio-frequency quadrupole (RFQ) based instruments before the accelerator in accelerator mass spectrometry (AMS) systems for ion-gas interactions at low kinetic energy (<40 eV). Most AMS systems arebased on a tandem accelerator, which requires negative ions at injection. Typically, AMS sensitivity abundance ratios for radioactive-to-stable isotope are limited to Xr/Xs >10^-15, and the range of isotopes that can be analyzed is limited because of theneed to produce rather large negative ion beams and the presence of atomic isobaric interferences after stripping. The potential of using low-kinetic energy ion-gas interactions for isobar suppression before the accelerator has been demonstrated for several negative ion isobar systems with a prototype RFQ system incorporated into the AMS system at IsoTrace Laboratory, Canada (Ontario, Toronto). Requisite for any such RFQ system applied to very rare isotope analysis is large transmission of the analyte ion. This requires proper phase-space matching between the RFQ acceptance and the ion beam phase space (e.g. 35 keV, ${\varphi}3mm$, +-35 mrad), and the ability to control the average ion energy during interactions with the gas. A segmented RFQ instrument is currently being designed at Korea Institute for Science and Technology (한국과학기술연구원, KIST). It will consist of: a) an initial static voltage electrode deceleration region, to lower the ion energy from 35 keV down to <40 eV at injection into the first RFQ segment; b) the segmented quadrupole ion-gas interaction region; c) a static voltage electrode re-acceleration region for ion injection into a tandem accelerator. Design considerations and modeling will be discussed. This system should greatly lower the detection limits of the 6 MV AMS system currently being commissioned at KIST. As an example, current detection sensitivity of 41Ca/Ca is limited to the order of 10^-15 while the 41Ca/Ca abundance in modern samples is typically 41Ca/Ca~10^-14 - 10^-15. The major atomic isobaric interference in AMS is 41K. Proof-of-principal work at IsoTrace Lab. has demonstrated that a properly designed system can achieve a relative suppression of KF3-/41CaF3- >4 orders of magnitude while maintaining very high transmission of the 41CaF3- ion. This would lower the 41Ca detection limits of the KIST AMS system to at least 41Ca/Ca~10^-19. As Ca is found in bones and shells, this would potentially allow direct dating of valuable anthropological archives and archives relevant to our understanding of the most pronounced climate change events over the past million years that cannot be directly dated with the presently accessible isotopes.

  • PDF

지급자재 조달관리부담 평가에 기초한 중소기업 공사용자재 직접구매제도 대응방안: 공공아파트를 공급하는 발주자를 중심으로 (Developing Response Plan for the Direct Buying System for SME's Construction Materials based on the Analysis of Material Procurement Management Load: Focused on the Owner Providing Public Apartment Housing)

  • 송상훈;방종대;손정락
    • 토지주택연구
    • /
    • 제4권4호
    • /
    • pp.425-434
    • /
    • 2013
  • 중소기업청은 일정규모 이상의 공공건설사업에 대해 일반공사와 의무적으로 분리하여 직접 구매해야 하는 123개 공사용자재 제품군을 지정하고, 법에서 정한 바에 따라 발주기관이 자재를 직접 구매하여 수급인에게 공급하도록 하고 있다. 본 연구에서는 이러한 공사용자재 직접구매제도 하에서 공공아파트 건설 현장에 투입되는 지급자재가 지니는 다양한 특성과 관리요인을 발주자 입장에서 종합적으로 고려하여, 주요관리대상 자재를 파악하고, 자재 조달 프로세스를 기반으로 이들에 대한 적정 관리 방안을 제시하였다. 즉, 조달경로, 현장특화정도, 입주자 요구수준, 업체 책임범위, 납품분할정도, 현장작업 요구도, 부속자재 필요도, 검수조건 등 지급자재가 가지는 주요 관리요인을 적용하여 공공아파트 건설사업에 적용되는 43개 직접 구매 대상품목의 조달관리부담을 평가한 결과, 상대적으로 높은 조달관리노력이 요구되는 주요관리대상그룹에는 목재창호, 알루미늄창호, 승강기, 목재마루재, 레미콘, 타일, 합성수지창호가 포함되었고, 그 중 알루미늄창호와 타일은 집중관리대상으로 분류되었다. 나아가 직접구매제도의 영향에 따른 집중관리대상 자재에 대한 대응방안은 발주자 입장에서 실태, 문제점, 관리측면의 주요 고려사항을 반영하여 작성하였으며, 실질적 수량 산출, 명확한 발주세부조건 정비, 생산 전후 활동 활성화, 하자보수 물량 확보, 공종별 간섭 사전 협의 및 해소 등이 필수적인 관리활동으로 나타났다.

전처리방법에 따른 불용성 6가 크롬 분석에 관한 연구 (Pretreatment Effect on the Analysis of Insoluble Hexavalent Chromium)

  • 이은정;노재훈;원종욱;전미령;조명화;김치년
    • 한국산업보건학회지
    • /
    • 제6권2호
    • /
    • pp.292-300
    • /
    • 1996
  • Hexavalent chromium($Cr^{+6}$) compounds are considered to be particularly hazardous, primarily because of the associated risk of allergic reaction and cancer. The analytic method of hexavalent chromium such as the s-diphenylcarba-zide(DPC) method and all ether previously used methods are often made uncertain due to significant interferences from organic components. This report can provide a technique for the more rapid and simple determination of total hexavalent chromium. than other currently using methods. The s-diphenylcarbazide method proposed by the U.S. National Institute for Occupational Safety and Health has low recovery rate(15.67 - 48.20%) due to interference, iron chloride and nickel chloride. A microwave oven technique has high recovery rate(about 70%) of insoluble hexavalent chromium. For the difference of ionic charges of $Cr^{+3}$-ethylenediamine tetraacetic acid(EDTA) chelate and $CrO_4{^{-2}}$, we could detect them simultaneously by ion exchanged high performance liquid chromatography. The confirmation of $Cr^{+3}$ and $Cr^{+6}$ were checked by fraction collector and flameless atomic absorption spectrometer. We observed that the small amount of hexavalent chromium is converted to trivalent chromium due to enhancement of chromium reduction by $Fe^{+3}$ or $Ni^{+2}$. As a result of this study, on the analysis of insoluble hexavalent chromium with microwave oven was used for, it may be better and more precise analysis after pretreatment by 2% NaOH-3% $Na_2CO_3$ and then analysis UV-spectrophotometer. It should be done for various studies on insoluble hexavalent chromium on the basis work environmental monitoring so called welding, painting etc.

  • PDF

발진부지를 이용한 초대구경 이수식 쉴드TBM 조립공정 검토 및 개선 사례 (Case of assembly process review and improvement for mega-diameter slurry shield TBM through the launching area)

  • 박진수;전삼수
    • 한국터널지하공간학회 논문집
    • /
    • 제24권6호
    • /
    • pp.637-658
    • /
    • 2022
  • 쉴드TBM 터널은 지반 굴착, 세그먼트 링 빌드(Segment ring-build), 뒷채움의 반복적인 공정으로 단순하다. 재래식 터널공법인 발파공법(Drill and Blast)은 막장관찰, 천공, 장약, 발파, 환기, 버력처리, 지보재 설치의 반복으로 쉴드TBM 터널보다 공정이 복잡하고 일부 제약조건이 따른다. 하지만 굴진을 위한 준비 작업은 지반을 보강하고 갱문조성 후 터널을 형성해 나가는 Drill and Blast에 비해서 쉴드TBM 터널은 매우 상세한 계획을 바탕으로 시간과 비용이 필요하다. 이는 대상지반을 굴착하는 쉴드TBM 장비의 성능 확보가 공사의 성패를 좌우하기 때문인데, 고가의 주문제작 장비인 쉴드TBM이 조립단계에서 잘못 구성되면 본 굴진은 물론 초기굴진 단계에서부터 구동이 어렵게 되고, 조립된 쉴드TBM 장비를 다시 해체하는 경우가 발생하게 되어 재조립하는 상황으로 진행되면, 공기는 물론 경제적인 손실이 발생하여 공사 기간 내내 어려움이 발생한다. 이에 본 연구에서는 한강 하저를 통과하는 국내 최대 직경의 도로터널을 건설하기 위한 이수식 쉴드TBM 조립을 위한 발진부지의 배치와 계획, 쉴드TBM 장비의 주요 부분별 조립공정을 검토하였고, 타공정과 의 간섭 최소화 및 커터헤드 조립과 운반의 효율성을 분석하여 현장여건에 맞게 개선하여 적용하였다.