• 대한청각학회지
• /
• 제25권4호
• /
• pp.189-199
• /
• 2021

Background and Objectives: This study aimed to investigate the occupational performance of Korean workers with and without hearing loss and analyze the hearing-related difficulties in the working environment. Subjects and Methods: The Amsterdam checklist for hearing and work was used for the analyses and the occupational environments of the Korean workers were investigated. Out of 129 total participants, 86 workers experienced severe to profound hearing loss and 43 had the normal hearing ability. The hearing-impaired workers were recruited from two leading vocational centers and normal-hearing workers were their colleagues. Results: The hearing-impaired workers were found to take fewer sick leaves and exhibited higher rates of permanent job statuses compared to the normal-hearing workers. Workers with hearing loss rarely detected background sound; however, they could perceive reverberation more frequently. They felt more satisfied with their careers than the normal hearing workers as they received social support and needed to put their effort into hearing for most hearing activities. Furthermore, the effort in hearing increased with the increase in job demand, job control, social support, and career satisfaction. The working hours per week increased with the increase in age, education level, job demand, job control, and social support. Different trends were observed in 9 out of 12 variables while comparing the data from the present study with that obtained from the hearing-impaired workers of the Netherlands, indicating a large difference between countries. Conclusions: Although the hearing-impaired Korean workers operate diligently with good job positions, it is necessary to enhance their acoustic environment and provide them social support. Considering the cultural background of the hearing-impaired workers, the development of suitable vocational rehabilitation programs and specific questionnaires is strongly recommended worldwide.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.63-72
• /
• 2013

Recent trends in rail industry can be characterized by the multifunctionality and very high-speed modes of operations. In particular, the adoption of the unmaned or operatorless operations has been getting increased attention in which case ensuring systems safety is crucial. On the other hand, according to the result of analyzing rail accidents, the human/operator errors have turned out to be one of the key causes of the accidents. Therefore, the effort of improving the work environment of locomotive cabs is quite necessary in order to decrease the accidents. The objective of this paper is studying on how to incorporate the factors related to the train operators in the design of the locomotive cabs and also on how to evaluate the design results obtained, which is subsequently reflected in the generation of the test and evaluation procedure. The approach taken is based on systems engineering, yielding the procedure document as a result. The results obtained in the paper can be useful in confirming the design of locomotive cabs utilizing the domestic human/operator measure. Also, the way of achieving the objectives can be utilized to cover the expanded rail systems development with appropriate design activities added.

• 대한인간공학회지
• /
• 제34권2호
• /
• pp.167-177
• /
• 2015

Objective: The objective of this research is to develop evaluation checklist for personal office furniture and apparatus to shape comfortable and efficient worksite for workers' welfare improvement, productivity enhancement and labor force preservation, and to identify office work environment by applying the checklist. Background: Because most office workers work using computers in a sitting posture, the ratio of office workers among total musculoskeletal disorders patients is forecast to increase. In this regard, an effort to prevent and manage such musculoskeletal disorders is required. Method: This research developed evaluation checklist for personal office furniture and apparatus by examining 25 domestic and international ergonomic literature and anthropometric data. This research carried out a fact-finding survey targeting the A Office and B Office of one public agency using the checklist. Results: Although, the checklist items on desks, chairs, computers and other goods conformed to the checklist standards, the following items did not conformed: desk height adjustment, seat board depth adjustment, lumbar support depth, foot rest, wrist rest, mouse tray, headset, speaker phone and Bluetooth. Conclusion: The evaluation checklist for personal office furniture and apparatus and fact-finding survey results are considered to be used as basic data for office work environment and workers' welfare improvement. Application: The information drawn from this research can be helpful to manufacturers' design and manufacture of ergonomic furniture and apparatus.

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.9-22
• /
• 2014

Constructions sites are affected by Diversity workplace, complexity of construction, Change of place, Mobility of workers and so on. In a single establishment, Prime contractors and subcontractors have to conduct their work at the same time. There are a lot of unpredictable risks when the construction is running, coordination between contractors is very important to do a risk assessment under the condition. Large Construction companies were investigated by previous studies. Survey research is applied to the risk assessment. In the writing, Risk assessment of the entire lower level. Because of the low level of risk factors to find. Also, There was a limit to investigate accidents. Confirmed that Effort to derive a risk factors were desperately of the risk assessment. Results were obtained through previous studies. The PCM is several experts should be joined. Experts Site Manager, Supervisor, Safety Manager, Director Contractor, Work team leader is required to participate. Construction plans, Process Planning to the risk find beforehand. And Determines how the operations and the control. Also, Made it into the database. and PCRA can be used in the risk assessment was developed.

• 한국안전학회지
• /
• 제15권4호
• /
• pp.101-111
• /
• 2000

In order to introduce P.S.M. system adequate to domestic construction first, many cases similar to advanced foreign P.S.M. system have been collected and compared to the domestic situation. Then, the current safety management status of bridges, subways, apartment and office building construction are investigated while visiting interview, using questionnaire at site have being done. The potential hazard and measurement have been investigated for each kind of works, and the domestic introducing method of P.S.M. system is analyzed with expert discussion. In order to represent how to make out P.S.M. plan, the questionnaire is made out using each five place for bridge, subways, apartment and office building. As the weight factor for potential hazard of each work obtained from more than forty site places, is produced and shown. Also, a direction the recommendation is suggested to improve tool in each construction site with work schedule. It is thought that proposed schedule contributed to keeping in safe business administration of each company in decreasing many effort at the construction site.

• Clinical and Experimental Reproductive Medicine
• /
• 제20권1호
• /
• pp.71-78
• /
• 1993

Since the successful advent of IVF-ET, reproductive surgeons have been forced to compare pregnancy outcomes of surgical procedures for tubal infertility with those of IVF-ET. The current study was designed in an effort to determine the usefulness of pre-operative infertility work-up, especially diagnostic laparoscopy, in predicting the pregnancy rate and in assessing the reversal feasibility. 109 patients who underwent a microsurgical tubal reversal were reviewed. The patients were followed over one year. The total intrauterine pregnancy, spontaneous abortion, and ectopic pregnancy rates were 66.4%, 3.7%, and 7.3%, respectively. The result showed that the use of loupe might increase the chance of the ectopic pregnancy. I found that the final tubal length, especially the longest tubal length, the site of reanastomosis, and the methods of sterilization affected the pregnancy rates. A 85% intrauterine pregnancy rate was achieved in the patients with good preoperative assessments(Group II-1). There was only 10% incidence of intrauterine pregnancy in the patients with bad assessments(Group II-2). It is concluded that the pre-operative infertility work-up, especially diagnostic laparoscopy, is a good diagnostic tool in assessing the reversal feasibility.

• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.1047-1057
• /
• 2016

Design engineering process for field programmable gate array (FPGA)-based reactor trip functions are developed in this work. The process discussed in this work is based on the systems engineering approach. The overall design process is effectively implemented by combining with design and implementation processes. It transforms its overall development process from traditional V-model to Y-model. This approach gives the benefit of concurrent engineering of design work with software implementation. As a result, it reduces development time and effort. The design engineering process consisted of five activities, which are performed and discussed: needs/systems analysis; requirement analysis; functional analysis; design synthesis; and design verification and validation. Those activities are used to develop FPGA-based reactor bistable trip functions that trigger reactor trip when the process input value exceeds the setpoint. To implement design synthesis effectively, a model-based design technique is implied. The finite-state machine with data path structural modeling technique together with very high speed integrated circuit hardware description language and the Aldec Active-HDL tool are used to design, model, and verify the reactor bistable trip functions for nuclear power plants.

• 한국치위생학회지
• /
• 제11권3호
• /
• pp.405-417
• /
• 2011

Objectives : A precedent research has documented that indoor air pollution is closely associated with increased the risk of symptom and decreased in job satisfaction. This study was conducted in an effort to assess the relationship of indoor air quality to self-perceived symptom and satisfied with working environment. Methods : This research is based on self-filling survey which 393 dental hygienists who work in seoul and Jeon-nam area participated on October 2010 through January 2011. This survey was compared and analyzed about the level of satisfaction and subjective symptom by the indoor air quality that dental office's working environment. Results : The result of satisfaction degree of hospital working environment was pretty low about office air. Most people mentioned that they were sore and dull all over the back, shoulder, and neck. Also, they were drowsy and exhausted in work place. Conclusions : In conclusion, it is need to improve their quality of life and mental health by developing proper air conditioning system and using one in their work place.

• Safety and Health at Work
• /
• 제8권4호
• /
• pp.343-346
• /
• 2017

Background: Long working hours adversely affect worker safety and health. In 2004, Korea passed legislation that limited the work week to 40 hours, in an effort to improve quality-of-life and increase business competitiveness. This regulation was implemented in stages, first for large businesses and then for small businesses, from 2004 to 2011. We previously reported that average weekly working hours decreased from 2006 to 2010, based on the Korean Working Conditions Survey. Methods: In the present study, we examine whether average weekly working hours continued to decrease in 2014 based on the 2014 Korean Working Conditions Survey. Results: The results show that average weekly working hours among all groups of workers decreased in 2014 relative to previous years; however, self-employed individuals and employers (who are not covered by the new legislation) in the specific service sectors worked > 60 h/wk in 2014. Conclusion: The Korean government should prohibit employees from working excessive hours and should also attempt to achieve social and public consensus regarding work time reduction to improve the safety, health, and quality-of-life of all citizens, including those who are employers and self-employed.

• 경영정보학연구
• /
• 제5권2호
• /
• pp.151-168
• /
• 2003

A knowledge portal is an integrated gateway for accessing relevant knowledge, collaborating and communicating with other users, and also linking internal applications which is becoming crucial in the age of information abundance. Research and development is a typical knowledge-intensive activity. However, knowledge management support in R&D has been minimal in most research organizations. In this paper, a knowledge portal is designed to support team-based researches in science and technology for searching and browsing knowledge, and also communicating with other team members, coordinating research project and collaborating with other researchers. Automating knowledge acquisition from various knowledge sources, knowledge categorization by applying text categorization method, and knowledge recommendation can help to relieve management effort and increase the efficiency of knowledge management processes. A prototype system based on the suggested model is also presented.