• 대한건축학회논문집:계획계
• /
• 제34권8호
• /
• pp.129-136
• /
• 2018

Termites are important sub-baits of natural ecosystems and are beneficial insects that are natural decomposer. However, the building materials used by human beings can not coexist with each other on timber which is a termite food. As of 2017, due to fertile forests, warming, and the spread of boilers, termite damage to timber construction is increasingly occurring day by day. Currently, Korea utilizes fumigation, Beit system, preserved wood, etc. of chemical products as termite control measures. But in the case of control measures, timber that has already been eaten by termites can not serve as a structural material and must be repaired. On the other hand, in the case of overseas, Scale of damage to termites the influence on the construction is also large, and a lot of research has been carried out on the prevention methods. In this thesis, investigate such foreign control measures, Would like to suggest a suitable method for Korea.

• Journal of the Korean Wood Science and Technology
• /
• 제45권6호
• /
• pp.828-835
• /
• 2017

Airtightness of buildings is one of critical aspects of its energy performance. To build up references of airtightness of wooden houses built in Korea, blower door tests have been carried out in 42 houses since 2006. Causes of air leakage were investigated recently. The average value of air change rate was $3.7h^{-1}$ for light frame house and $5.5h^{-1}$ for post-beam construction at ACH50 (air change per hour at 50 Pa air pressure difference). Foam type insulation was more advantageous in ensuring building airtightness than glass fiber batt. Airtightness of wooden houses which were constructed after 2010 was improved to have less than $1.5h^{-1}$ of ACH50, threshold for application of artificial air change. The average air change rate of CLT (cross laminated timber) houses showed the lowest value, $1.1h^{-1}$, among the tested structures.

• 대한건축학회논문집:구조계
• /
• 제35권3호
• /
• pp.11-18
• /
• 2019

The purpose of this study was to estimate the resistance capacity of a traditional wooden house with shear walls made of wood panel. In order to achieve the purpose of the study, the load - displacement test was carried out and the resistance moment values of the shear walls were proposed. The shear walls were made by placing studs with a nominal dimension of $38mm{\times}89mm$ at intervals of 600 mm, and attaching 12 mm thick plywood with 8-d size pegs at intervals of 150 mm. The type of traditional building wall was classified and showed the moment resistance ability of each wall type. This value is expressed as a proportional value divided by the moment resisting capacity of the standard size shear walls not divided into the divided small frames. Although some frames have proportional values larger than 1.0 even though they have openings, most of them show values smaller than 1.0. Also, even without the openings, it showed a smaller value than 1, such as 0.84 and 0.67.

• 건축역사연구
• /
• 제30권3호
• /
• pp.33-44
• /
• 2021

San-ja is one of the main members consisting of the roof of traditional wooden buildings in Korea. In this study, the regional characteristics of the materials used in San-ja and changes of the materials over time were examined. To this end, 123 documents on the repair of wooden architectural heritage recorded since the 1950s were reviewed. It was found that there was a difference in the San-ja material by region because of the diversity in the conditions of material supply. For instance, bamboo was the most frequently used material in Jeollanam-do province because it was readily available. However, with the development of transportation and vehicle, the regional characteristics have disappeared. As a result, the material has been unified with bamboo now. This is because bamboo is specified as a representative material in the specification or the convenience of construction is prioritized. In addition, the social and economic conditions at the time of repair had an influence on the selection of the San-ja materials.

• 한국산학기술학회논문지
• /
• 제17권12호
• /
• pp.488-495
• /
• 2016

본 연구는 목조 건조물 문화재의 내진 대책과 보수 보강 개선에 관한 기초적인 연구이다. 현재 문화재 내진에 관한 규정은 문화재청의 '문화재 지진재해 등에 관한 규정'으로 문화재 지진발생 후의 피해 상황 보고체계만을 규정하고 있다. 한국은 2013년 이후, 일본의 '중요 문화재(건조물) 내진진단 내진보강 지침'을 참고로 하여 전문가의 내진점수평가 체계를 도입하는 연구가 진행되고 있다. 일본의 목조 건조물 문화재의 내진은 우리나라와 유사하게 전문가의 점수평가로 진단되지만, 지진 발생 전, 지진 발생 중, 지진 발생 후로 구분하여 관리되고 있다. 또한 '헤리티지 매니저'와 '문화재 닥터'를 운용하여 문화재의 상시적인 관리와 재난 발생 시 신속한 복구가 가능한 체계를 갖추고 있다. 우리나라의 목조 건조물 문화재의 지진 발생 후의 피해복구 중심의 관리체계를 벗어나 문화재의 상시적인 관리를 위한 전문가의 양성과 문화재 내진기준의 정립, 건축 관련 민간단체의 활용을 통한 상시적인 관리체계의 도입이 필요하다. 그리고 목조 건조물 문화재의 현황을 조사하여 개별 목조 건조물 문화재의 점검을 통한 다양한 내진진단 기법의 개발과 적합한 보수 보강 지침의 마련이 필요하다.

• 한국건설순환자원학회지
• /
• 제19권1호
• /
• pp.8-11
• /
• 2024

• Journal of the Korean Wood Science and Technology
• /
• 제36권1호
• /
• pp.54-60
• /
• 2008

버섯종균에 의해 열화된 신갈나무 버섯폐골목의 흡음성능과 구조적 특징의 변화를 관찰하고자 버섯폐골목을 원반형으로 채취하여 무처리 목재와 구조적 특징의 변화를 비교하고, 전달함수법을 이용하여 흡음률을 측정 비교하였다. 측정주파수범위에서 버섯폐골목의 시험편이 보통의 시험편보다 높은 흡음률을 나타내었으며, 특히 2~6 KHz의 주파수영역에서는 보통 목재보다 2~3배 정도 높은 흡음률을 나타내었다. 버섯폐골목은 무 처리 목재보다 중량이 70% 정도 감소하였으며, 3단면에서 다수의 공극이 관찰되어 이들이 흡음공극으로 작용하여 측정주파수영역에서 흡음률이 증가된 것으로 사료된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.247-248
• /
• 2018

In order to secure the variability of long-life housing, dry walls are used. The composite gypsum board panel is the most frequently used infill system for the wall, and it is an excellent construction method in terms of constructability and economic feasibility. However, there are also problems such as the destruction of Ondol pipes at the bottom floor and being unable to fix the light weight steel frame (M-bar) when a variable composite gypsum board panel is used. To solve such problems, a wall with a method of fixing only the top part without fixing the bottom floor is developed, but it is difficult to identify the durability of ceiling frame according to the tensile force of stud and the safety according to the Stiffness and impact resistance (soft body) of ceiling frame. Therefore, this study verified the effectiveness of infill system for the wall by conducting experiment on the stiffness and impact resistance of composite gypsum board panel according to the reinforcement of ceiling frame (wooden frame, double saw-toothed bracket, Cross M-bar). As a result, it was possible to secure the safety of wooden frame while the impact resistance and the Stiffness of double saw-toothed bracket and cross M-bar were not secured.

• Journal of the Korean Wood Science and Technology
• /
• 제44권4호
• /
• pp.515-525
• /
• 2016

The Palsangjeon Pagoda is a five-story wooden building in the Beopjusa Temple area in the Songnisan national park in Chungcheongbuk-do, Korea. According to historical records, it was constructed in either AD 1605 or AD 1626. To specify the construction year more precisely, we took 41 wood samples for tree-ring analysis during repair actions in 2013; 28 from red pine (Pinus densiflora S. et Z.), 12 from oak (Quercus spp.), and 1 from fir (Abies spp.). The tree-ring boundaries became clearly visible by smoothing their cross-sectional surface and the tree-ring widths were measured under a stereo microscope. All tree-ring series were compared with each other to establish mean chronologies, which we then compared with local master chronologies established using tree rings collected from wooden elements of the Daeungjeon Hall which is the main building in the Beopjusa Temple area. As a result, it was verified that the red pines were felled in AD 1624 and in AD 1851. Moreover, it was verified that the oaks were also felled in AD 1624 based on cross-dating with the red pine chronology. We concluded that the Palsangjeon Wooden Pagoda was constructed in AD 1626, as mentioned in the historical record (Daeungdaekwangmyeongjeonbulsangki, 1630) and the letters on a purlin on the $4^{th}$ story, using oak and red pine felled in AD 1624 and repaired later on using red pine felled in AD 1851.

• 한국멀티미디어학회논문지
• /
• 제12권8호
• /
• pp.1164-1171
• /
• 2009

본 논문에서는 건물 부재간의 수치비례 관계를 이용한 Parametric Modeling 방식을 통하여 효율적인 전통목조건축물 구현을 제안한다. 제안한 방법을 사용하여 우리나라의 대표적인 전통 목조건축인 경복궁 근정전의 구조 및 시공과정을 디지털로 구현한다. 일반적으로 전통건축문화재를 디지털화할 때 건축물의 외형적인 모습에 역점을 두고 제작을 하지만, 본 논문에서는 해당건축물을 해체해야 알 수 있는 눈에 보이지 않는 구조물과 이러한 구조물들이 결합하는 건축 시공순서를 보여줄 수 있도록 수많은 부재를 제작하고 각 위치에 맞게 배치하였다. 본 논문에서는 3D 디지털 근정전을 구현하기 위하여 사용한 Parametric 모델링기법과 Multi-Object Texture Mapping 기법, Physical Camera 와 GI Renderer 설정 그리 고 목조건물의 구조에 대한 전반적인 정보 및 모델링 자료는 다른 목조건축물을 디지털로 제작하는데 활용성이 높다고 할 수 있다.