• Journal of the Korean Wood Science and Technology
• /
• v.16 no.1
• /
• pp.9-20
• /
• 1988

Lespedeza species have been widely used not only as plant resources for bark, leaves and honey, but also as erosion control materials. This study was carried out to investigate the structural and wood tiber characteristics in order to obtain basic information for the utilization of the wood. The wood structure was investigated for 10 selected species and the wood fiber, for the 5 selected species among Lespedeza species distributed all over the country. The following results were obtained. In the cross section, campylotropis showed ray diffuse porous wood, L. bicolor, L. cyrtobotrya, L. thunbergii var. intermedia, diffuse porous wood, and L. tomentella, L. angustifolioides. L. maritima, L. robusta, L. patentibicolor, ring porous wood. The maximum diameter of a single vessel ranged 66-123 ${\mu}$ in all species. Campylotropis showed the most number of vessels, L. angustifolioides, the least. The number of ray per mm ranged 7-22, Campylotropis showed the most number of rays, L. angustifolioides, the least. In the radial section the average length of vessel ranged 121-250 ${\mu}$ in all species. L. thunbergii var. intermedia showed the longest vessel, L. tomentella, the shortest. In tangential section the average width of the uniseriate ray ranged 9.2-14.7${\mu}$, that of the multiseriate ray, 19.2-42.1 ${\mu}$. The average height of the uniseriate ray ranged 143.0-1162.0 ${\mu}$. The width of fiber ranged 10.12-13.61 ${\mu}$, L. maximowiezii showed the narrowest tiber, L. thunbergii var. intermedia. the widest, the thickness of fiber wall ranged 2.93-3.71 ${\mu}$ in the five species. L. maximowiezii showed the most thin fiber wall, L. thunbergii var. intermedia, the thickest, L. cyrtobotrya showed the difference in the size of fiber between the shade and the sunny sites but L. maximowiezii showed no difference. There was significant difference in fiber length, fiber width and wall thickness between L. eyrtobotrya and L. maximowiezii.

• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.35-45
• /
• 2013

The Clay Statues of Donggwanwangmyo Shrine (Treasure No. 142) are highly damaged physical weathering which are crack, exfoliation. Pigment of surface are discolored by chemical weathering like dust. The result of ultrasonic velocity measurement, low velocity zone was measured the lowest part of Woojanggun Statue. Deficiency condition of pigment layer was evaluated quantitatively through infrared Thermography. As a result, exfoliation part was detected at high temperature. Making techniques of the Clay statues were identified by gamma rays, infrared TV, SEM. All Clay Statues were founded on wood base and joints of wood were fixed using thin iron wires. After wood base was twisted a straw rope, it was made by clay. Clay was blended with rice straw to prevention of crack and exfoliation. The upper side of clay layer was coated with Hanji(Korean handmade paper) and cotton in order to isolate the pigment layer.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.6
• /
• pp.591-601
• /
• 2021

Recently it is trend to increase wood use as carbon neutral materials, there is recognized to need necessarily durability improvement of wooden building. It is very rare to report existing on the identification of isolates causing discoloration in domestic weathered wooden building used for long period. The objective of this study was identification of fungi that cause discoloration on the exteriors of weathered domestic wooden buildings in the southern part of South Korea. Our findings can be helpful to establish protection technology for weather deterioration of domestic wooden buildings. Wood chip samples presumed to be contaminated with sapstain fungi were collected from the surface of wooden members used in wooden buildings at Jangheung, Jeollanam-do (two locations, #13 and #14), and Jeju Island (two locations, #31 and #33). The growth of microorganisms was confirmed by performing culture tests for the collected samples, and fungi were isolated, purified, and identified. The results indicated that the fungal strains isolated from wooden buildings #13 and #14 at Jangheung, Jeollanam-do, were 99.83% and 100% homologous to Aureobasidium melanogenum, respectively. For wooden building #31 at Jeju Island (two locations), the fungal strain isolated was 100% homologous to A. melanogenum, which is the same species isolated from the wooden buildings at Jangheung. The fungal strain isolated from wooden building #33 (Jeju Island) had 99.83% homology with A. pullulans, which is commonly found in wood degraded by weather or ultraviolet rays. Our findings can be utilized as a basis for establishing protection technology in domestic wooden buildings.

• The Research Journal of the Costume Culture
• /
• v.12 no.1
• /
• pp.1-11
• /
• 2004

This study was carried out on the process of natural dye substances which can flock ultraviolet rays without producing harmful substances by pollution, germs, etc. While making human body safe in contact, extracting Gardenia, Sappan wood, Radix scutellariae, Cromwell, Mugwort, Gallnut, Lac. Those are used for curing diseases, dyeing silk cloth with those extracts, and examining the color fastness, Ultraviolet protection. From this study, the following conclusion was produced. Brightness was lower in pre-mordanting than in post. And color difference showed that Radix scutellariae was the highest. Aluminum-mordanting showed a higher color difference than Fe. Colorfastness to washing was high in all samples, and the degree of color-changing by washing was the highest in the sample dyed by gardenia, pre-mordanted gallnut showed the highest degree. Colorfastness to perspiration was the highest in gardenia. UV-A test showed that all samples a high rate of 85% or higher compared with test white cloth. Especially, post-mordanted radix scutellariae, pre-mordanted gallnut and post-mordanted sappanwood showed a superior blocking rate.

• Journal of Plant Biology
• /
• v.27 no.2
• /
• pp.81-94
• /
• 1984

Anatomical features and cell dimensions of the secondary xylem in the stem of the korean Lauraceas including 6 genera and 12 species were investigated under a light microscope and scanning electron microscope. Key to identification among genera or species was made from the anatomical features and systematic correlation investigated. The stem woods of Lauraceae exhibit the following characters: (1) quite evenly distributed pores (diffuse-porous wood) (2) perforation plates simple or occasionally scalariform in the latewood vessels (3) almostly 2-seriate and heterocellular rays (4) abundant paratracheal-vasicentric parenchyma (5) oil cells. Especially, the appearance of simple perforation plates suggest the Lauraceae to be more or less advanced. It is considered that the series of specialization in the Lauraceae from the perforation plates and the height of rays is as LinderalongrightarrowNeolitsealongrightarrow(Machilus, Litsea, Iozoste)longrightarrowCinnamomum, and Lindera sericea is the most pribitive in the Lauraceae.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.1 s.129
• /
• pp.38-47
• /
• 2005

Compression, lateral, and opposite woods in a branch of Pinus parviflora S. et Z. were described and compared in the qualitative anatomical aspects through light and scanning electron microscopy. Tracheid transition from earlywood to latewood in the compression wood appeared to be relatively more gradual than in the opposite or lateral wood. Growth ring width and proportion of latewood were thought to be greater in the compression wood than in the lateral or opposite wood. The latewood tracheids of compression wood in transverse surface were mostly round, differently from those of lateral and opposite woods with square to angular shapes. Also, intercellular spaces, helical cavities and checks, and slit-like pit apertures were observed only in the compression wood tracheids. Cross-field pitting in the compression wood appeared not to be used as diagnostic guide because of their severe alteration from normal fenestriform or window-like type to cupressoid to taxodioid types. In tangential surface, fusiform rays in the compression wood were wider but lower than those in the lateral wood or opposite wood. In conclusion, compression wood was different from lateral and opposite woods but lateral and opposite woods were almost identical in qualitative anatomical features.

• Journal of Plant Biology
• /
• v.28 no.1
• /
• pp.21-28
• /
• 1985

The bipinnate-compound leaf of Parkia clappertoniana has prominent, long petiole with a pulvinal base. The pulvinus has wood, periderm, lenticels and extensive cortical layer. Its vascular bundles are elongated with alternating rays. The vascular bundles of the petiole, rachis and veins are oval, with conspicuous bundle caps. Stomatal complex is predominantly paracytic with occasional occurrence of anomocytic stomata near the midrib. The oval stomata have conspicuous stomatal ledges. Trichomes are unicellular, acicular and restricted to the rachis, petiole and pinnule mid-ribs and margin. Ecological and taxonomic significance of features is discussed.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.15-20
• /
• 2011

The pine wilt disease is one of the most serious forest diseases that kill the pine trees, and the study on the invasion and movement of the pine wood nematode within the tree is very important for understanding the inhabitation of pine wood nematode. In this relation, the microscopic observation was carried out to study the place of inhabitation and movement of pine wood nematode within the infested wood. In result, the rays were mainly infested by pine wood nematode and showed dark discoloration due to their necrosis in cross, radial and tangential surface. Also, the intensive damage was found in the resin canals. On the other hand, some traumatic resin canals in tangential band were identified in the sapwood near the cambium. In the ray, the pine wood nematode occurred more commonly in the ray parenchyma cell and fusiform ray with horizontal resin canal than in the ray tracheid and uniseriate ray without horizontal resin canal, respectively. The pine wood nematode was thought to move from ray to tracheid through the large natural opening, window-like pit, in the cross-field, neither through the small natural opening, bordered pit, in the tracheid nor through the tracheid wall by creating a bore hole.

• Journal of Forest and Environmental Science
• /
• v.21 no.1
• /
• pp.98-103
• /
• 2005

Anatomical properties of kenaf cultivated in Korea was investigated using light microscopy. Bast fiber, phloem ray and cortex parenchyma cell were observed in bast, and vessel, wood fiber and ray in core. A lot of solitary and multiple radial pores in core existed. The cell type of ray parenchyma in radial section was procumbent, upright and square cells. Uniseriate and multiseriate rays existed in tangential section. The layer of bast fiber in bast increased with increasing the growth period.

• Journal of the Korea Furniture Society
• /
• v.28 no.3
• /
• pp.248-258
• /
• 2017

A study was carried out to observe the 1% aqueous safranine solution flow speed in longitudinal and radial directions of softwood Thuja orientalis L., diffuse-porous wood Gmelina arborea Roxb., and ring-porous wood Phellodendron amurense Rupr., Longitudinal flow was considered from bottom to top while the radial flow was considered from bark to pith directions. In radial direction, ray cells and in longitudinal direction tracheids, vessel and wood fiber were considered for the measurement of liquid penetration speed at less than 12% moisture contents(MC). The variation of penetration speed for different species was observed and the reasons behind for this variation were explored. The highest radial penetration depth was found in ray parenchyma of T. orientalis but the lowest one was found in ray parenchyma of P. amurense. The average liquid penetration depth in longitudinal trachied of T. orientalis was found the highest among all the other cells. The penetration depth in fiber of G. arborea was found the lowest among the other longitudinal cells. It was found that cell dimension and also meniscus angle of safranine solution with cell walls were the prime factors for the variation of liquid flow speed in wood. Vessel was found to facilitate prime role in longitudinal penetration for hardwood species. The penetration depth in vessel of G. arborea was found highest among all vessels. Anatomical features like ray parenchyma cell length and diameter, end-wall pits number were found also responsible fluid flow differences. Initially liquid penetration speed was high and the nit gradually decreased in an uneven rate. Liquid flow was captured via video and the penetration depths in those cells were measured. It was found that even in presence of abundant rays in hardwood species, penetration depth of liquid in radial direction of softwood species was found high. Herein the ray length, lumen area, end wall pit diameter determined the radial permeability. On the other hand, vessel and fiber structure affected the longitudinal flow of liquids. Following a go-stop-go cycle, the penetration speed of a liquid decreased over time.