• Resources Recycling
• /
• v.31 no.5
• /
• pp.67-76
• /
• 2022

The furniture industry has a high possibility to create value-added and a high potential to create new occupations due to the characteristics of the industry, which mainly consists of small and medium-sized enterprises (SMEs). However, the used furniture, which has sufficient reuse value, is also crushed and used as solid refuse fuel (SRF) recently. Besides, the number of waste treatment companies continues to decrease, and it occurs congestion of wood waste. As a way to solve the issue, a business model development of remanufacturing used furniture can be suggested as an alternative due to its high circular economic efficiency. Remanufacturing business including furniture industry creates positive effects in various aspects such as economic, environmental and job creation. In other words, remanufacturing is an effective recycling way to reduce input resources and energy in the production process. The results of economic analysis show that the expected annual revenue from the single worker furniture remanufacturing site was 104 million won which is 3.11 times more than the average income of a single-worker household in Korea and its B/C ratio was estimated about 30 which means high business feasibility. Revenue through furniture remanufacturing also showed 320 times higher than that of SRF production from the perspective of weight. In addition, it is shown that the GHGs reduction from the furniture remanufacturing is 2.2 ton CO₂-eq. per year, which is similar to the amount of GHGs absorption effect of 937 pine trees or 622 Korean oak trees annually. Thus the results of this study demonstrate that it is important to adopt an appropriate recycling method considering the economic and environmental effects at the end-of-life stage.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.446-455
• /
• 2015

Based on comparative studies on standards and grading procedures of machine graded lumber in Korea and other countries, this study proposed a procedure of determining the grade classification and design strengths of domestic machine graded lumber. Differences between machine stress rated lumber and E-rated laminations were detailed in order to clarify the need for the procedure improvement. To this improvement the use of average MOE requirement for grading was introduced instead of the fixed minimum MOE requirement which is currently used in the Korean standards. It was found that the fixed minimum MOE requirement method was easier for an inspector to grade but, less efficient as a strength predictor than the average MOE requirement method. The advantage of average MOE requirement method is statistically MOR-MOE regression-based MOR prediction and highly efficient in quality control though it requires a computer-aided operation system in an initial setup. A major weakness of the current Korean grading system was found that different strength characteristics depending on wood species were not reflected on the grade classification and the tabulated allowable design stress. The proposed procedures were developed taking advantages of respective merits of both methods and based on MOR-MOE regression analysis. Through this procedure, the grades of machine stress rated lumber should be revised to become interchangeable with E-rated lamination, which would be beneficial to the cost competitiveness of domestic machine graded lumber and glued laminated timber industry.

• Resources Recycling
• /
• v.18 no.2
• /
• pp.16-29
• /
• 2009

This paper describes characteristics of pollutants in wastewater from the pulp and paper industry and biological technologies for the wastewater treatment. The wastewater from the pulp and paper industry contains high concentrations of biochemical oxygen demand (BOD) and chemical oxygen demand (COD) and shows high toxicity and strong black-brown color. In particular, organic chlorinated compounds such as dioxins and furans may be formed by the chlorination of lignin in wood chips. Thus the pulp and paper industry is recently trending toward total chlorine-free (TCF) bleaching processes. All biological technologies for pulp and paper wastewater treatment are based on the contact between wastewater and bacteria, which feed on organic materials in the wastewater, thus they reduce BOD concentration in it. Both aerobic and anaerobic treatments were found to be effective for the wastewater treatment. Furthermore, advanced technologies such as fungal application and combined biological-filtration process have been also introduced to the wastewater treatment field. These technologies would be useful for water recycling to reduce water consumption throughout pulp and paper making process.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.105-112
• /
• 2008

Grading of the urushi lacquer is quite difficult because of large variations depending on origin, growing conditions, time acquisition, storage conditions. It is urgently required to establish a grading system of urushi lacquer by combining traditional method with scientific methods. Traditional grading of urushi lacquer was done by visual inspection of 10 experts who are working on urushi lacquer industry. Common aspects of the experts were color, odor, viscosity, spread properties on Hanji, color and drying properties on glass based the traditional grading system. In addition, rubbing on Hannj and heating with alcohol lamp was also used to grade urushi lacquer. The grading results of 10 experts showed that chinese urushi lacquer (E) of 7.03, japanese urushi lacquer (C) of 6.84, domestic urushi lacquer of (A) of 6.41 and another chinese urushi lacquer (D) of 5.27, and domestic urushi lacquer (B) of 2.50 in descending order. The degree of spread on Hanji was not consistent among 10 experts. These results indicated that the traditional grading system was pretty much personal and required of developing more objective method based on scientific background.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.2
• /
• pp.218-224
• /
• 2008

Coal-, coconut- and wood-based activated carbons and anthracite were tested to evaluate adsorption and biodegradation performances of chloral hydrate. In the early stage of the operation, the adsorption was the main mechanism for the removal of chloral hydrate, however as increasing populations of attached bacteria, the bacteria played a major role in removing chloral hydrate in the activated carbon and anthracite biofilter. It was also investigated that chloral hydrate was readily subjected to biodegrade. The coal- and coconut-based activated carbons were found to be most effective adsorbents in adsorption of chloral hydrate. Highest populations and activity of attached bacteria were shown in the coal-based activated carbon. The populations and activity of attached bacteria decreased in the order: coconut-based activated carbon > wood-based activated carbon > anthracite. The attached bacteria was inhibited in the removal of chloral hydrate at temperatures below 10$^{\circ}C$. It was more active at higher water temperatures(20$^{\circ}C$ <) but less active at lower water temperature(10$^{\circ}C$>). The removal efficiencies of chloral hydrate obtained by using four different adsorbents were directly related to the water temperatures. Water temperature was the most important factor for removal of chloral hydrate in the anthracite biofilter because the removal of chloral hydrate depended mainly on biodegradation. Therefore, the main removal mechanism of chloral hydrate by applying activated carbon was both adsorption and biodegradation by the attached bacteria. The observation suggests that the application of coalbased activated carbon to the water treatment should be the best for the removal of chloral hydrate.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.3
• /
• pp.48-64
• /
• 1988

This study was carried out to investigate the free vibrational properties of traditional and replaceable species for sounding board, using piezoelectrical accelerometer and signal analyzer. In the study, the frequency equations of free-free beam carrying a concentrated mass in the transverse vibration and of free-mass beam in the longitudinal vibration were used. The results obtained were as follows. 1. Average values of dynamic modulus of rigidity of Korean commercial species measured were as follows. Paulownia tomatosa (Thunb.) Steudel: $5.590\times10^9\;dyne/cm^2$ Tilia amurensis Rupr.: $5.414\times10^9\;dyne/cm^2$ Macckia amurensis Rupr.: $10.044\times10^9\;dyne/cm^2$ Fraxinus mandshurica Rupr.: $8.876\times10^9\;dyne/cm^2$ Ulmus davidiana var.japonica Nakai: $8.677\times10^9\;dyne/cm^2$ Pinus rigida Miller: $6.33\times10^9\;dyne/cm^2$ Fraxinus rhynchophylla Hance: $4.666\times10^9\;dyne/cm^2$ 2. The ratio of dynamic transverse Young's modulus to dynamic modulus of rigidity, $E_T/G_{LT}$, was 24.922 for Fraxinus rhynchophylla Hance, which was the highest, 7.317 for Paulownia tomentosa (Thunb.) Steudel, which was the lowest among Korean commercial species measured. 3. The value of longitudinal dynamic Young's modulus was about 3.7% and 19.8%, respectively, higher than those of transverse dynamic and static Young's modulus. The value of transverse dynamic Young's modulus was about 15.5% higher than that of static Young's modulus. 4. Predicted value of MOR in terms of correlation coefficient by transverse dynamic Young's modulus was slightly higher than that of static Young's modulus, but no significance was found out. 5. Transverse dynamic Youne's modulus was $(2.002\pm0.288)\times10^{11}\;dyne/cm^2$ for Fraxinus mandshurlca Rupr., which was the highest, $(0.601\pm0.100)\times10^{11}\;dyne/cm^2$ for Paulownia tomentosa (Thunb.) Steudel, which was the lowest among Korean commercial species measured. The sound velocity of sitka spruce was 5,685 m/sec, which was the highest. 6. Internal friction of Paulownia tomentosa (Thunb.) Steudel was shown the lowest value among Korean commercial species, $(8.795\pm1.795)\times10^{-3}$, but was higher than that of sitka spruce, $(7.331\pm0.991)\times10^{-3}$. Internal friction was shown negative correlation with density and dynamic Young's modulus, respectively. 7. K value was affected largely by internal friction and was the highest, $2.225\times10^8$ for Paulownia tomentosa (Thunb.) Steudel and was the lowest, $0.550\times10^8$ for Fraxinus rhynchophylla Hance. K value of Paulownia tomentosa (Thunb.) Steudel was higher than that of sitka spruce and K values of melapi and cottonwood, which have been considered to be replaceable species with sitka spruce in the piano industry, were lower than those of Paulownia tomentosa (Thunb.) Steudel and mill amurensis Rupr.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.4
• /
• pp.32-44
• /
• 1987

This study was carried out to analyze and furecast the domestic demand for plywood in Korea by regression models with time-series data for 16 years(1970-85). The results obtained were summarized as follows. 1. To analyze domestic demand for plywood, GNP, PWI and CWI were used as independant variables. The domestic demand equation was computed as follows: $^{in}DDP$=0.65186+1.29412 $^{in}GNP$-0.28385 $^{in}PWI$-1.05011 $^{in}CWI$ Where DDP : Domestic demand for plywood(1000 S/F) GNP: Gross national product (Billion won) PWI : Real wholesale price index of plywood CWI: Real wholesale price index of construction materials. 2. Among independant variables reflecting on the production activity of plywood industry, GNP was the most decisive in forecasting the domestic demand for plywood. 3. The significance can be recognized highly because the decision coefficient of the forecasting model which is obtained by using time series data is 0.9. 4. According to the estimated regression coefficients for GNP, PWI and CWI, GNP shows positive relation while PWI and CWI show negative relation. 5. An annual average increase rate of demand for plywood was 9.4 percent during expect period. Therefore, it was decreased slightly than that of 10.2 percent during sample period.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.3
• /
• pp.81-99
• /
• 2000

The shelterbelts are very important to conserve and protect the sandy land, vegetation coverage, farmland, livestock and human life in the desertified land. The shelterbelts are constructed by the several row-plantings of high-adaptable species in the desertified land. The shelterbelts have various kind of type, and there are shelterbelts for conservation of farmland in dry the region, the protective shelterbelts (windbreaks for blowing-sand, artificial sanddune fixation by revegetation, and construction of farmland shelterbelts to protect farmland and pasture from wind erosion, etc.) in the semi-dry steppe, shelterbelts around the villages and oasis for sanddune fixation, shelterbelts for protection of railroads, and so on. The shelterbelts consist of main she1terbelts and minor shelterbelts. The main shelterbelts were constructed by being perpendicular to main wind direction, and the minor shelterbelts were constructed by being perpendicular to the main shelterbelts. Generally, the width of shelterbelts is 8~20m, and the number of row-planting is 4~10. The grid sizes of shelterbelts networks are $400{\times}400m$, $300{\times}500m$, $100{\times}200m$, and so on, and there are ventilation type and closing type in the type of shelterbelt. The width, number of row-planting, grid size and type of shelterbelt are selected by the local characteristics. The effects of shelterbelts are mainly the climate improvement and mitigation, such as prevention of occurrence of strong wind, cold wind and blowing-sand. And, the other effects of shelterbelts are effect of reforestation, increase of agricultural productions, establishment of greenbelts and green forests, construction of landscape-eco shelterbelts, improvement of life environment of local villages, supply of fuel wood and agricultural wood, land amelioration, effect of revegetation and restoration of desertified land, and so on. The kinds of the tree species mainly used for the construction of shelterbelts have differences between regions, but main species are Populus euphratica, Populus simonii, Populus bolleana, Populus tomentosa, Salix flavida, Salix mongolica, Tamarix chinensis, Hedysarum scoparium, and so on.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.82-90
• /
• 1999

The buddhistic painting of Song-Kwang temple in Seungjoo-gun, Chonnam, Korea is not known in chronicle, but it could be estimated to works in the early 19th century through it's remaining records and qualities of materials. And it was analysed the qualities of materials consisting of pigment layer, silken-ground layer and support layer in order to preserve buddhistic painting, made back-adherent paper of the support layer proper to it, tested its compatibility, and then concluded as follows. 1. The section structures of buddhistic painting is consisted of the pigment layer, silken-ground layer of silk and the support layer of Korean hand made paper, it could be recognized that buddhistic painting in 19th century was basically composed of the pigment layer, the silken-ground layer and the support layer. Moreover the pigment layer and the silken-ground layer got adhered with glue, and sheets of support layers got back adhered with paste. 2. The support layer of buddhistic painting consisted of 5 layers and two kinds of paper were used for them. The first and second layers were composed of Korean hand made paper made of pure paper mulberry bast fibers, and the rest of them of paper that paper mulberry bast fibers were mixed into recycled hemp fibers. Though it is difficult to assert without the security of more data, finding out the then situation through the qualities of materials, it was presumed that the society in 19th century was suffered from economical difficulties and the operation of the paper industry of temples was rather difficult and so low-qualitative recycled hemp fibers might used for back-adherent paper. 3. Considering tension between silken-ground layers and support layers of this materials, newly made back-adherent paper was used for repair, and then I could conform that it was proper to back-adherent paper for repair.

• Fire Science and Engineering
• /
• v.29 no.2
• /
• pp.79-83
• /
• 2015

The fire accident is a representative type of disaster that can largely impact on business. Therefore, precautionary measures and rapid initial response is very important when a disaster occurs. The storage of porous combustibles is inevitable in coal yard, plywood processing industry, and others that are currently operating. Initial fire fighting of fire and identifying the ignition point in such a porous combustible storage space are so difficult that if the initial response is failed, being led to deep-seated fire, surface fire is likely to result in secondary damage. In addition, deep-seated fire can cause personal injuries and property damage due to a large amount of toxic gases and reignition. Therefore damage reduction measures is required around the storage space to handle a porous flammable. Improving the penetration performance of the concentration of the surfactant is carried out as underlying study, which is about an deep-seated fire extinguishing efficiency augmentation when using wetting agents. The porous materials used in the experiments is radiata pine wood flour, which occupies more than 75% of the domestic wood market. Fire fighting water is selected as Butyl Di Glycol (BDG), which is being used for infiltration extinguishing agent, and the experiment was carried out by producing a standard solution. The experiment was carried out on the basis of the Deep-Seated Fire Test of NFPA 18. The amount of watering, porous material to the internal amount of penetration, and runoff measurement out of the porous material was conducted. According to experimental results, as the surface tension is reduced, the surfactant concentration macroscopic penetration rate decreases, but infiltration to a porous material is shown to have growth characteristics.