• 한국축산시설환경학회지
• /
• 제7권1호
• /
• pp.13-20
• /
• 2001

This study was conducted to investigate the actual conditions on housing and facilities for goat. This investigation of the actual conditions was investigated by the style of farm which was divided into sideline scale and speciality scale included 47 farms. The results are summarized as follows: Rearing scale was 48.9% for 50-100 heads per farm. Rearing type was 46.8% for grazing type and 53.2% for barn type. Housing type was 27.7% for simple frame housing and 72.3% for permanent housing. Pipe was used 80.8% with Pillar and Girder as the housing frame at farm. For the pipe used in farm, 27.7% of them was used for simple frame housing. Side wall was composed of cement and winch curtain to be 29.8%, slate roof to be 40.4%, pipe partition to be 38.3%, and cement floor to be 51.1%. Materials of feeding trough were wood and Zinc grater to be 41.5%, respectively. Type of feeding trough was square to be 70.2%. The feeding trough was located in barn to be 48.9%. Material of water supply facilities was plastic to be 87.2%. Type of water supply facilities was mostly square to be 76.6%. Water-trough was located in playground to be 48.9%. Parturition facilities were consisted of partition structure by group to be 42.5% and were mainly composed of pipe and wood. 46.8% of the barn did not have delivery room in the farm.

• Advances in Computational Design
• /
• 제4권3호
• /
• pp.251-272
• /
• 2019

This study performed lateral load testing on seventeen wood wall frames in two sections. Section one included eight tests studying structural foam sheathing of shear walls subjected to monotonic loads following the ASTM E564 test method. In this section, the wood frame was sheathed with four different types of structural foam sheathing on one side and gypsum wallboard (GWB) on the opposite side of the wall frame, with Simpson HDQ8 hold down anchors at the terminal studs. Section two included nine tests studying wall constructed with oriented strand board (OSB) only on one side of the wall frame subjected to gradually applied monotonic loads. Three of the OSB walls were tied to the baseplate with Simpson LSTA 9 tie on each stud. From the test results for Section one; the monotonic tests showed an 11 to 27 percent reduction in capacity from the published design values and for Section two; doubling baseplates, reducing anchor bolt spacing, using bearing plate washers and LSTA 9 ties effectively improved the OSB wall capacity. In comparison of sections one and two, it is expected the walls with structural foam sheathing without hold downs and GWB have a lower wall capacity as hold down and GWB improved the capacity.

• Journal of the Korean Wood Science and Technology
• /
• 제41권3호
• /
• pp.234-246
• /
• 2013

목조주택의 골조 및 실내 외 마감용으로 사용되는 침엽수 구조재를 대상으로 방염 방충 보존처리제가 혼합된 약제에 마이크로파 가열 후 열기를 지닌체 침지하여 복합적인 기능화를 부여한 후 목재의 건조 스케줄, 방염 시험에 의한 화재 저항성과 흰개미에 의한 내충해성, 혼합 약제의 침투성 분석을 실시한 결과 마이크로파로 3 kW로 5분 급속 가열된 시험편은 목표 온도 및 함수율을 만족하는 것으로 나타났으며, 인산염과 헤테로고리화합물계가 혼합된 약제에 120분 침지할 경우 가장 높은 중량 증가율을 가지는 것으로 나타났다. 또한 방염 후 처리 물품 시험을 실시한 결과 인산염과 혼합된 약제는 방염기준을 모두 만족하는 것으로 나타났으며, 흰개미 투입 후 7일 사충율을 확인한 결과 인산염과 헤테로고리화합물계 혼합 약제 침투 시험편의 경우 96% 이상 높은 사충율을 나타냄으로서 가장 우수한 특성을 가지는 것으로 나타났다. 목재 내부로 약제 침투성 분석을 실시한 결과 목재 세포내부 전면에 있어 혼합약제가 침투된 것으로 나타나 목재의 방염성 및 방충 저항성 등에서 우수한 성능의 발현은 혼합 약제의 균일한 침투때문으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제37권3호
• /
• pp.177-183
• /
• 2009

경상북도 청도군에 있는 4곳의 고택을 답사하고 기둥의 특징을 분석함과 아울러 기둥 부재 시료를 대상으로 광학현미경 기법을 사용하여 수종 식별을 실시하였다. 기둥은 직경(또는 한 변의 길이)과 배치 간격, 높이 등이 서로 관련성을 갖는데 기둥 사이의 간격에 따라 보통 기둥의 직경과 기둥의 길이를 기본단위로 하여 축조됨을 알 수 있었다. 수종 식별 결과 3곳의 고택에서는 침엽수 목재가, 1곳의 고택에서는 활엽수 목재가 확인되었다. 이중 활엽수 목재는 밤나무이고 침엽수 목재는 모두 소나무인 것으로 식별되었다. 전통적으로 목구조부재로 소나무가 많이 사용되었다고는 하나 일부 활엽수재도 구조용재로 사용된 것으로 밝혀졌다.

• 한국화재소방학회논문지
• /
• 제32권1호
• /
• pp.40-45
• /
• 2018

무기재로서 질석은 친환경적인 특성과 내화, 단열, 흡음 뿐 만 아니라 결로방지, 탈취 및 미관 등이 우수하므로 건축마감재로서 활용될 경우 효용성이 높을 것으로 판단된다. 본 연구에서는 질석을 주원료로 하여 미네랄 루즈울(Mineral Loose Wool) 또는 미네랄 파우더(Mineral Powder)를 혼입한 건축용 마감보드를 개발하고 불연시험과 단열시험을 수행하였다. 시험결과 두 개의 질석보드 모두 불연재로서 성능을 확보하였으며 열전도율 0.086 및 $0.092W/m{\cdot}K$로 나타났다. 또한 개발된 두 개의 질석보드를 경골목구조 내화벽체 표준상세(KS F 1611-1)의 마감재로 적용하여 내화시험을 수행하였다. 내화시험결과 VB-L 시험체가 VB-P시험체 보다 내화성능이 다소 높게 나타났으며 두 개의 질석보드 모두 두께 30 mm로도 내화성능 2시간 확보가 충분한 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제19권4호
• /
• pp.34-42
• /
• 1991

Protection of tropical forest affects on significant reduce of tropical hardwood supply, and softwood resources will be increasingly important for the timber security in Korea. U.S. softwood log was most favorite species for Korean softwood log importers in overall import conditions except price stablization and consistency of export policy. Reduced export volume from Pacific Northwest to Korean market has been immediately replenished by rediata pine from New Zealand and Chilean plantation. Siberian timber will hardly play major roles in Korean timber market unless budding structure. softwood plywood and softwood furniture uses are enhanced. Recent rapid rise of labor cost and reducing tariff rrate in Korea provided better opportunities for import lumber in building materials market. Dry dimension lumber was relatively profitable when processed from import U.S. soft-wood log while green lumber was favorable products processed from radiata pine log in Korean lumber market. This means U.S. softwood lumber would have better opportunity to market for '2${\times}$'4 studs when wood frame housing is introduced. On the other hand while radiata pine is competitive on temporary construction lumber such as supporter and concrete forming frame in Korea. Shortage of raw material for the new capacity of board plants in Korea will be it bottle neck. Major log export countries to Korea as U.S. New Zealand and Chile showed high trade intensity indices of composite hoard produces for Korean market. As Korea efforts to diversify import sources, and tariffs are reduced to 8% as scheduled by 1994. countries of scoring higher comparative advantages as Portugal. Brazil, Austria as well as New Zealand will have better opportunity to penetrate into promised Korean composites hoard market.

• Journal of the Korean Wood Science and Technology
• /
• 제50권3호
• /
• pp.159-166
• /
• 2022

CO₂ emissions are the primary reason for global warming; hence, biological and chemical technologies for converting CO₂ into useful compounds are being actively studied. Biological methods using enzymes can convert CO₂ under mild conditions. Formate dehydrogenase (FDH) is a representative CO₂ conversion enzyme. Its function was revealed after isolation from bacteria, yeast, and plants. In this study, we evaluated the CO₂ conversion potential of FDH isolated from wood-rotting fungi. After isolating the FDH gene (TvFDH) from Trametes versicolor, we cloned the full-length FDH from T. versicolor and expressed it in a cell-free expression system. The gene encoding TvFDH was identified as 1,200 bp open reading frame (ORF) and the expected molecular weight of the protein was approximately 42 kDa. Overexpression of the recombinant crude protein including TvFDH was confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Enzyme activities and metabolite analyses confirmed the efficiency of TvFDH for CO₂ reduction.

• Journal of the Korean Wood Science and Technology
• /
• 제38권5호
• /
• pp.405-413
• /
• 2010

A hybrid post and beam shear wall system with structural insulation panel (SIP) infill was developed as a part of a green home 'Han-green' project through post and beam construction for contemporary life style. This project is on-going at the Korea Forest Research Institute to develop a new building system which improves Korean traditional wet-type building system and stimulates industrialized wood construction practice with pre-cut system. Compared to the traditional wet-type infill wall components, the hybrid wall system has benefits, such as, higher structural capacity, better thermal insulation performance, and shorter construction term due to the dry-type construction. To build up the hybrid wall system, in previous, SIP infill wall components can be manufactured at factory, and then inserted and nailed with helically threaded nails into the post and beam members at site. Shear performance of the hybrid wall system was evaluated through horizontal shear tests. The SIP hybrid wall system showed higher maximum shear strength, initial stiffness, ductility, yield strength, specified strength, and the specified allowable strength than those of post and beam with light-frame wall system. In addition to this, the hybrid wall system can provide speedy construction and structural and functional advantages including energy efficiency in the building system.

• Journal of the Korean Wood Science and Technology
• /
• 제31권2호
• /
• pp.52-57
• /
• 2003

본 연구에서는 목조 고건축물의 하나인 향교를 대상으로 곤충류의 활동이 활발한 시기인 2001년 3월부터 9월에 걸쳐 외부 기둥 표면이나 이미 발생한 탈출공 내부 및 주변에 붙어 있는 곤충을 채집하여 분류, 동정하였고, 이들의 목조 고건축물 가해충 여부를 고찰하였다. 채집된 곤충은 딱정벌레목(Coleoptera) 10종, 벌목(Hymenoptera) 15종, 노린재목 (Hemiptera) 6종, 파리목(Ditera) 4종, 그리고 집게벌레목(Demaptera) 1종으로 동정되었다. 이 중 포획종과 개체수가 가장 많은 딱정벌레목과 벌목의 대부분은 구기가 저작형이며 강대한 턱을 가지고 있어 목조 건축물에 상당한 피해를 줄 것으로 생각된다. 앞으로 채집된 곤충 중 어떤 종류가 목재 가해 충류인지와 가해충류로 최종 확인된 충류의 계속적인 연구가 필요하다고 사료된다.

• Journal of the Korean Wood Science and Technology
• /
• 제46권4호
• /
• pp.415-422
• /
• 2018

Terpenoids have a wide range of biological functions and have extensive applications in the pharmaceutical, cosmetic, and flavoring industry. The white-rot fungus, Polyporus brumalis, is able to synthesize terpenoids via terpene synthase, which catalyzes an important step that forms a large variety of sesquiterpene products from farnesyl pyrophosphate (FPP). To improve the production of sesquiterpenes, the terpene synthase gene was isolated from Polyporus brumalis and was heterologously transformed into a Pichia pastoris strain. The open reading frame of the isolated gene (approximately 1.2 kb) was inserted into Pichia pastoris to obtain a recombinant enzyme. Five transformants were obtained and the expression of terpene synthase was analyzed at the transcript level by reverse transcription PCR (polymerase chain reaction) and at the protein level by SDS-PAGE (sodium dodecyl sulfate polyacrylamide gel electrophoresis). Expression of the terpene synthase gene product was elevated in the transformants and as expected the molecular weight of the protein was approximately 45 kDa. These recombinant enzymes have potential practical applications and future studies should focus on their functional characterization.