• 제목/요약/키워드: wireless transceiver

검색결과 212건 처리시간 0.02초

USB OTG를 이용한 VLC 송·수신 모듈 구현 (Implementation of VLC transceiver module using USB OTG)

  • 이종성;이대희;오창헌
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2017년도 추계학술대회
    • /
    • pp.668-670
    • /
    • 2017
  • LED 기술의 발전으로 차세대 근거리 무선통신으로 주목받고 있는 가시광통신의 관련 연구가 증가하고 있다. 하지만 통신을 위한 별도의 장비 필요, 장애물에 대한 빛의 투과성 한계로 IoT 서비스에 적용 사례가 미비하다. 본 논문에서는 가시광통신의 포지션 가능한 필요기술 인식을 위해 USB OTG에 연결하여 사용할 수 있는 휴대용 VLC 송 수신 모듈과 제어를 위한 전용 어플리케이션을 제안한다. 전용 어플리케이션에서 입력한 문자열은 USB OTG를 통해 VLC 모듈로 전송되어 모듈 간 데이터를 송 수신한다. 문자열 전송 실험 결과, 구현한 전용 어플리케이션의 제어를 통한 VLC 송 수신모듈 간 ASCII Code 전송이 가능함을 확인하였다.

  • PDF

0.18㎛ CMOS 공정을 이용한 WBAN용 비동기식 IR-UWB RF 송수신기 (A Non-coherent IR-UWB RF Transceiver for WBAN Applications in 0.18㎛ CMOS)

  • 박명철;장원일;하종옥;어윤성
    • 전자공학회논문지
    • /
    • 제53권2호
    • /
    • pp.36-44
    • /
    • 2016
  • 본 논문에서는 $0.18{\mu}m$ CMOS 공정을 이용하여 WBAN(Wireless Body Area Network)용 IR-UWB(Impulse Radio Ultra Wide Band) RF 송수신기를 제안한다. 설계된 송수신기는 3-5GHz UWB low band를 지원하며 OOK(On-Off Keying) 변조 방식을 사용한다. 수신기는 복잡도와 소모 전력을 줄이기 위해서 비동기식 에너지 검출 방식을 사용하였다. 원하지 않는 잡음을 제거하고 감도를 개선하기 위하여 RF active notch filter가 내장되어 있다. VCO 기반의 수신기는 switch mechanism을 사용하였다. 사용된 switch mechanism은 소모 전력을 줄이고 VCO leakage를 최소화 할 수 있다. 또한, 중심주파수가 변해도 항상 동일한 spectrum mask를 가진다. 측정된 수신기의 감도는 3.5 GHz의 중심주파수에서 1.579 Mbps의 전송 속도를 가질 때 -84.1 dBm을 가진다. 송신기와 수신기는 각각 0.3 nJ/bit, 41 mW의 소모 전력을 사용한다.

Performance Analysis of NOMA-based Relaying Networks with Transceiver Hardware Impairments

  • Deng, Chao;Zhao, Xiaoya;Zhang, Di;Li, Xingwang;Li, Jingjing;Cavalcante, Charles Casimiro
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권9호
    • /
    • pp.4295-4316
    • /
    • 2018
  • In this paper, the performance of non-orthogonal multiple access (NOMA) dual-hop (DH) amplify-and-forward (AF) relaying networks is investigated, where Nakagami-m fading channel is considered. In order to cover more details, in our analysis, the transceiver hardware impairments at source, relay and destination nodes are comprehensively considered. To characterize the effects of hardware impairments brought in NOMA DH AF relaying networks, the analytical closed-form expressions for the exact outage probability and approximate ergodic sum rate are derived. In addition, the asymptotic analysis of the outage probability and ergodic sum rate at high signal-to-noise ratio (SNR) regime are carried out in order to further reveal the insights of the parameters for hardware impairments on the network performance. Simulation results indicate the performance of asymptotic ergodic sum rate are limited by levels of distortion noise.

자율 주행 로봇을 이용한 환경 모니터링 시스템 (Environment Monitoring System Using Autonomous Mobile Robot)

  • 정혜진;김원중;손철수;조병록;양수영
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2009년도 추계학술대회
    • /
    • pp.1038-1041
    • /
    • 2009
  • 온도, 습도, 조도 또는 토양 센서 등을 탑재한 무선 센서 노드들을 네트워크로 구성하여 자연 환경 정보를 획득하고 분석하여 다양하게 활용하고 있다. 이러한 무선 센서 네트워크는 저전력 무선트랜시버를 탑재한 다수의 노드들이 근거리 무선 통신과 멀티-홉 기법으로 구성된다. 따라서 무선센서 네트워크를 통하여 수집된 데이터의 특징은 한정된 범위 내에 밀집된 노드들로부터 얻어진다는 것이다. 그러나 넓은 범위에 흩어져있는 무선 센서 노드들로부터 데이터를 얻기 위해서는 장거리로 데이터를 송신할 수 있도록 고전력을 소비하는 무선 트랜시버를 사용하거나 중계 노드를 많이 필요로 하여, 무선 센서 네트워크 가지고 있는 장점인 저전력과 저비용이라는 특징이 희석된다. 본 논문에서는 이러한 문제를 해결하기 위하여 넓게 산재되어 있는 각각의 센서 네트워크 그룹 들을 순회하여 데이터를 수집하는 자율 주행 로봇을 이용한 환경 모니터링 시스템을 제안한다.

  • PDF

무선 센서네트워크 환경에서 Duty Cycle 기반 동기식 및 비동기식 MAC 프로토콜의 에너지 성능과 지연시간에 대한 상호 분석 (The Energy Performance Analysis Between Synchronous and Asynchronous Duty Cycle based MAC Protocols in Wireless Sensor Networks)

  • 이재호;엄두섭
    • 한국IT서비스학회지
    • /
    • 제10권3호
    • /
    • pp.237-250
    • /
    • 2011
  • Recently, Wireless Sensor Networks (WSN) require energy performance and guaranteed delivery delay time, contrarily with previous MAC protocols that aim to high throughput mostly. In order to satisfy the new significant requirements, many MAC protocols of WSN employ and try to enhance the duty cycle mechanism which is energy efficient technique in MAC layer. This duty cycle mechanism is oriented by toggling the transceiver conditions composed of wakeup and sleep states. The synchronous MAC protocols perform the period synchronization process. Hence, these are energy efficient in periodic monitoring environment, but are inefficient in where an event is incurred rarely and infrequently. Otherwise, the performance of asynchronous MAC protocols are contrarily with synchronous protocols. In this paper, we design two models consisting Always-busy and Always-idle ti simplify the general network congestion conditions. Through these models, moreover, we analyze two types MAC protocols in terms of energy efficiency and delay performance by analytical results. Additionally, we also evaluate two MAC protocols with two gongestion models that we designed. By the analytical and simulated results, we provide the general and efficient decision method in which protocols are more appropriate in a certain WSN environment.

무선 영상 송수신 단말기용 UWB 안테나 설계 및 구현 (Design and Implementation of UWB Antennas for Wireless Video Transceiver Handset)

  • 이성옥;채정식;정회경
    • 한국정보통신학회논문지
    • /
    • 제16권4호
    • /
    • pp.686-691
    • /
    • 2012
  • UWB(Ultra-WideBand)는 대역별로 배타적 주파수 이용 권한이 부여되는 방식을 탈피하여 매우 넓은 주파수 대역을 활용하면서도 기존에 해당 주파수를 사용하고 있는 다른 서비스에 주파수 간섭을 일으키지 않는 기술 방식이면서 동시에 수백 Mbps 이상의 데이터 전송률을 실현 할 수 있는 기술로 무궁무진한 발전 가능성을 가진 기술이라 할 수 있다. 이에, 본 논문에서는 UWB의 기술 일반에 대한 이해와 더불어 기술 동향에 대해 연구하고, UWB 통신에 사용되는 안테나를 분석하고 무선 영상 송수신용 단말기에 적용 가능한 UWB용 소형 안테나를 설계 및 구현하였다.

백색 LED 기반 수중 및 수상-수중 간 광무선 통신시스템 연구 (A Study on the White LED-based Underwater and Surface-to-Underwater Optical Wireless Communication Systems)

  • 손경락;손창우;김성호
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제36권2호
    • /
    • pp.309-314
    • /
    • 2012
  • 본 논문에서는 백색 LED를 이용한 수중 가시광 통신 시스템 개발에 대하여 기술하였다. 아날로그 음성 통신 시스템을 위하여 펄스위치변조 방식이 적용되었으며, 디지털 데이터 통신을 위하여 온-오프 키잉 변조 방식이 적용되었다. 시스템은 저가형으로 상용화된 발광소자인 백색 LED와 수광 소자인 실리콘 기반 포토다이오드를 사용하여 근거리 수중통신을 위한 트랜시버를 개발하였으며 가시광 통신의 수중 통신 적용 가능성을 보이고자 하였다. 광 감쇠와 산란 등으로 대기 중에서의 통신에 비하여 수중에서의 통신 성능이 저하되는 결과를 얻었지만 수중통신 채널에 적합한 모뎀 기술이 적용된다면 수중에서 강인한 통신인터페이스를 제공할 수 있을 것이다.

Wideband RF Interference Reduction Module

  • Kang, Sanggee;Hong, Heonjin;Chong, Youngjun
    • International journal of advanced smart convergence
    • /
    • 제11권3호
    • /
    • pp.28-35
    • /
    • 2022
  • Interference always exists between wireless communication systems used in the same frequency band or adjacent frequency bands. In order to deploy a new wireless communication system such as a 5G system, a new frequency band must be allocated to the system. For this purpose, after analyzing interference between the existing system and the new system, a method of setting a frequency guard band or a minimum separation distance has been used as a passive method to limit the interference effect. This paper presents a wideband RF IRM(Interference Reduction Module) that can actively reduce the influence of interference between wireless communication systems. The wideband RF IRM can reduce the interference effects of 5G signals on satellite signals. The principle and structure of the wideband RF IRM are presented. The wideband RF IRM can suppress approximately 20dB of interference signal in 100MHz bandwidth when only interference signal exists. It also shows that when a 5G interference signal of -45dBm/100MHz and a satellite signal of -55dBm/40MHz exist simultaneously at a center frequency of 3.83GHz, about 15dB of 5G interference signal can be reduced in the frequency range covered by the satellite signal. The experimental results demonstrate that the wideband RF IRM can actively reduce the 5G interference signal on the satellite signal and can be used for the purpose of reducing the interference effect in a similar environment.

Design and simulation of a rectangular planar printed circuit board coil for nuclear magnetic resonance, radio frequency energy harvesting, and wireless power transfer devices

  • Mostafa Noohi;Adel Pourmand;Habib Badri Ghavifekr;Ali Mirvakili
    • ETRI Journal
    • /
    • 제46권4호
    • /
    • pp.581-594
    • /
    • 2024
  • In this study, a planar printed circuit board (PCB) coil with FR4 substrate was designed and simulated using the finite element method, and the results were analyzed in the frequency domain. This coil can be used in wireless power transfer (WPT) as a transmitter or receiver, eliminating wires. It can also be used as the receiver in radio frequency energy-harvesting (RF-EH) systems by optimizing the planar PCB coil to convert radio-wave energy into electricity, and it can be employed as an excitation (transmitter) or receiver coil in nuclear magnetic resonance (NMR) spectroscopy. This PCB coil can replace the conventional coil, yielding a reduced occupied volume, a fine-tuned design, reduced weight, and increased efficiency. Based on the calculated gain, power, and electromagnetic and electric field results, this planar PCB coil can be implemented in WPT, NMR spectroscopy, and RF-EH devices with minor changes. In applications such as NMR spectroscopy, it can be used as a transceiver planar PCB coil. In this design, at frequencies of 915 MHz and 40 MHz with 5 mm between coils, we received powers of 287.3 μW and 480 μW, respectively, which are suitable for an NMR coil or RF-EH system.

5G 광중계기 구동을 위한 디지털 송수신 유닛 설계 (Development of Digital Transceiver Unit for 5G Optical Repeater)

  • 민경옥;이승호
    • 전기전자학회논문지
    • /
    • 제25권1호
    • /
    • pp.156-167
    • /
    • 2021
  • 본 논문에서는 5세대 이동통신 네트워크 서비스의 커버리지를 확장하고, 빌딩내에서의 안정적인 무선 네트워크 연결해 주는 5G 광중계기의 인빌딩용 디지털 송수신 유닛 설계를 제안한다. 제안된 5G 광중계기 구동을 위한 디지털 송수신 유닛은 신호처리부, RF 송수신부, 광입출력부, 클록발생부 등의 4개 블록으로 구성된다. 신호처리부는 CPRI 인터페이스의 기본 동작과 4채널 안테나 신호의 조합 및 외부에서의 제어 명령에 대한 응답 등 중요한 역할을 수행한다. 또, JESD204B 인터페이스로 고품질의 IQ 데이터를 송수신 한다. 파워 앰프를 보호하기 위해 CFR, DPD 블록이 동작한다. RF 송수신부는 안테나로부터 수신된 RF 신호를 AD 변환하여 JESD204B 인터페이스로 신호처리부에 전달되고, 신호처리부에서 JESD204B 인터페이스로 전달된 디지털 신호를 DA 변환하여 안테나로 RF 신호를 송신한다. 광입출력부는 전기신호를 광신호로 변환하여 송신하고, 광신호를 전기신호로 변환하여 수신한다. 클록발생부는 광입출력부의 CPRI 인터페이스에서 공급되는 동기 클록의 지터(Jitter)를 억제하고, 신호처리부와 RF 송수신부에 안정적인 동기 클록을 공급한다. CPRI 연결전에는 로컬 클록을 공급하여 CPRI 연결 준비 상태로 동작한다. 본 논문에서 제안된 5G 광중계기 구동을 위한 디지털 송수신 유닛의 정확성을 평가하기 위해서 Xilinx 사의 MPSoC 계열의 XCZU9CG-2FFVC900I를 사용하였고 설계 툴은 Vivado 2018.3을 사용하였다. 본 논문에서 제안된 5G 광중계기 디지털 송수신 유닛이 ADC로 입력되는 5G RF 신호를 디지털로 변환하여 CPRI를 통해 JIG로 전달하는 Uplink 동작과 JIG로부터 CPRI를 통해 전달받은 Downlink 데이터 신호를 DAC로 출력하는 기능과 성능을 평가하였다. 실험결과는 평탄도, Return Loss, Channel Power, ACLR, EVM, Frequency Error 등이 목표로 한 설정 값 이상의 성능이 나타남을 확인 할 수 있었다.