• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.48-48
• /
• 2000

We developed a wireless communication system for multiple instrumentation system. The developed system has a function of remote instrumentation and PLC(Programmable Logic Controller) control. The system consists of CC(Control and Communication) protocol, wireless media access and physical media system. For multiple wireless communication, we propose a hub polling protocol based on master-slave control concept. To show the validity of the developed system, several experiments are illustrated.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.5 no.1
• /
• pp.13-24
• /
• 2006

This paper proposes a wireless management system for a pet dog using wireless sensor network. The developed intelligent wireless management system is compose of a central control system, auto-feeder, miniguidance robot, and wireless sensing devices. The developed system uses three types of sensed data such as light, temperature, md sounds from a pet dog and surrounded environment respectively. The presented design method using these data provides an efficient way to controlling and monitoring the pet dog. The implemented system can be used as a design framework of portable device for the pet management.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.7 no.1
• /
• pp.1-13
• /
• 2007

This paper proposes a wireless management system for a pet dog using wireless sensor network. The developed intelligent wireless management system is compose of a central control system, auto-feeder, mini-guidance robot, and wireless sensing devices. The developed system uses three types of sensed data such as light, temperature, and sounds from a pet dog and surrounded environment respectively. The presented design method using these data provides an efficient way to controlling and monitoring the pet dog. The implemented system can be used as a design framework of portable device for the pet management.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.5
• /
• pp.998-1013
• /
• 2013

Wireless wearable sensor networks have emerged as a promising technique for human motion tracking due to the flexibility and scalability. In such system several wireless sensor nodes being attached to human limb construct a wearable sensor network, where each sensor node including MEMS sensors (such as 3-axis accelerometer, 3-axis magnetometer and 3-axis gyroscope) monitors the limb orientation and transmits these information to the base station for reconstruction via low-power wireless communication technique. Due to the energy constraint, the high fidelity requirement for real time rendering of human motion and tiny operating system embedded in each sensor node adds more challenges for the system implementation. In this paper, we discuss such challenges and experiences in detail during the implementation of such system with wireless wearable sensor network which includes COTS wireless sensor nodes (Imote 2) and uses TinyOS 1.x in each sensor node. Since our system uses the COTS sensor nodes and popular tiny operating system, it might be helpful for further exploration in such field.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.5
• /
• pp.489-494
• /
• 2014

In this paper, a design of multiple channel wireless remote control system for unmanned vehicle is proposed. One of serious problems of the previous wireless remote control system is that it does not work when a control channel is damaged in case of emergency because it's composed of single control channel. Therefore, we propose the multiple channel wireless remote system which is composed of a portable wireless remote controller and a stationary wireless remote controller. The portable wireless remote controller and stationary wireless remote controller are designed and the multiple channel wireless remote control system for unmanned vehicles in developed. By applying to the unmanned vehicle to check its performance. The wireless remote control system is tested. Emergency stop using the portable wireless remote controller is tested when the stationary wireless remote controller is damaged. Also, emergency stop using the stationary wireless remote controller is tested when the portable wireless remote controller is damaged. The result of emergency stop test shows satisfied performance.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.91-94
• /
• 2006

In this paper, we deployed the tunnel inspection and monitoring system by wireless sensor network. It is shown that the wireless sensor network which is composed of sensor, wireless communication module, and gateway system can be applied to tunnel monitoring system. Sensors included herein are acceleration transducers, fire-alarm sensors, water-level sensors, and magnetic contact sensors. It is also found that the wireless sensor network can deliver sensing data reliably by ad-hoc networking technology. The gateway system that can send the sensing data to server by CDMA (code division multiple access) is developed. Finally, monitoring system is constructed by web service technology, and it is observed that this system can monitor the present state of tunnel without difficulties. Furthermore, the above system provides an alternative to inspect and monitor the tunnel efficiently where the conventional wired system cannot be applied.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.4
• /
• pp.349-355
• /
• 2008

In this paper, a wireless remote monitoring system for leakage current of distribution board is developed. In the developed system, signals of the leakage current of distribution board are transmitted to a monitoring system using wireless communication. The developed system is consisted of a comparative module, control module, a wireless communication module, and hand held terminal. The developed system has any facilities which can check a leakage current with real time, send to the user this fact using a wireless remote interface method. And also developed system can take precaution for an accident by leakage current.

• Journal of the Korean Society for Railway
• /
• v.17 no.4
• /
• pp.228-232
• /
• 2014

The magnetic field generated by the feeding line of a wireless power transfer system induces voltage on the rail of a railway system. The induced voltage of the rail can have a bad influence on the track circuit and on safety. This paper simulated three feeding lines to study the relation between the feeding lines and the induced voltage of the rail; it also proposed magnetic field distribution of the feeding line to reduce the induced voltage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.7
• /
• pp.564-571
• /
• 2013

Wireless network has been used in many applications due to its advantages such as convenience, mobility, productivity, easy deployment, easy expandability and low cost. When it comes to stability, wireless network still shows its limitation which makes it difficult to be used for real-time control system. One of the first problems of using wireless network for control system is clock synchronization. There have been synchronization schemes proposed for wired networked control system as well as wireless network. But these should not be applied directly in wireless network control system. In this paper, we point out the importance of clock synchronization in wireless network control system. Then based on the characteristic of wireless networked control system, we propose a clock synchronization scheme for it. Furthermore, we simulate our scheme and compare with previous synchronization scheme in wired and wireless environments.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.1
• /
• pp.83-87
• /
• 2014

This paper describes the magnetic field analysis of wireless power transfer via magnetic resonant coupling. The wireless power transfer system for supplying power to electric vehicle is developed. The parameters of coil transfer system are simulated by the finite element method (FEM). Therefore the coil structure of power transfer system can be accurately analyzed. This paper deals with 3kW wireless transfer system.