• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.179-187
• /
• 2014

The underlay protocol is a cognitive radio method in which secondary or cognitive users use the same frequency without affecting the quality of service (QoS) for the primary users. In addition, because of the broadcast characteristics of the wireless environment, some nodes, which are called eavesdropper nodes, want to illegally receive information that is intended for other communication links. Hence, Physical Layer Security is applied considering the achievable secrecy rate (ASR) to prevent this from happening. In this paper, a performance analysis of the amplify-and-forward scheme under an interference constraint and Physical Layer Security is investigated in the cooperative communication mode. In this model, the relays use an amplify-and- forward method to help transmit signals from a source to a destination. The best relay is chosen using an opportunistic relay selection method, which is based on the end-to-end ASR. The system performance is evaluated in terms of the outage probability of the ASR. The lower and upper bounds of this probability, based on the global statistical channel state information (CSI), are derived in closed form. Our simulation results show that the system performance improves when the distances from the relays to the eavesdropper are larger than the distances from the relays to the destination, and the cognitive network is far enough from the primary user.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.19-24
• /
• 2016

In Long Term Evolution-Advanced (LTE-A), small cell enhancement(SCE) has been developed as a cost-effective way of supporting exponentially increasing demand of wireless data services and satisfying the user quality of service(QoS). However, due to the dense and irregular distribution of a large number of small cells, the offloading scheme should be applied in the small cell network. In this paper, we propose an user offloading scheme for SCE in LTE-Advanced system. We divide the small cells into different clusters according to the reference signal received power(RSRP) from user equipment(UE). Within a cluster, We apply the user offloading scheme with the consideration of the number of users and interference conditions. Simulation results show that proposed scheme can improve the throughput, and spectral efficiency of small cell users. Eventually, proposed scheme can improve overall cell performance.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.144-155
• /
• 2013

This paper presents a low-cost remote power-quality-failure monitoring system (RPMS) using Android App and TI MCU (micro-controller unit), which is appliable to a micro-grid. The designed RPMS testbed consists of smart nodes, a server, and Android APPs. Especially, the C2000-series MCU-based RPMS smart node that is low-cost compared to existing monitoring systems has both a signal processing function for power signal processing and a data transmission function for power-quality monitoring data transmission. The signal processing function implements both a wavelet-based power failure detection algorithm including sag, swell, and interruption, and a FFT-based power failure detection algorithm including harmonics such that reliable and real-time power quality monitoring is guaranteed. The data transmission function implements a low-complexity RPMS transmission protocol and defines a simple data format (msg_Diag) for power monitoring message transmission. We may watch the monitoring data in real time both at a server and Android phone Apps connected to the WiFi network (or WAN). We use RS-232 (or Bluetooth) as the wired (or wireless) communication media between a server and nodes. We program the RPMS power-quality-failure monitoring algorithm using C language in the CCS (Code Composer Studio) 3.3 environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.9
• /
• pp.809-819
• /
• 2004

In this paper, in order to exclude the expansion of M/W relay frequency or its new frequency assignment possibly, we analyzed a possibility of substituting M/W system by B-WLL or optical fiber network regarding service quality and economical points. To define the target of service quality, pre-condition and analysis method for the selected media have been derived to compare each other. E1 transmission with BER 10$^{-1}$ was chosen as a reference capacity, and service distance was calculated f3r the selected media as a function of availability. Also from the economical point we considered 3 systems such as optical fiber, M/W, and B-WLL based upon basic system structure, and analyzed them for various line configurations of fiber optic and B-WLL according to service period, system capacity, transmission distance, and data rate. It was confirmed that B-WLL can provide quality of service with 99.999 % availability within 1.6 km cell radius, and for optical fiber substitution, the leased fiber conduit on an electric pole is more economical than M/W system irrespective of service period, but in case of directly digging for underground conduit, it turned out ineffective regardless of cabling duct types.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.101-107
• /
• 2012

When wireless devises for MICS(Medical Implant Communication Service) or ISM(Industrial Scientific and Medical) bands are designed, it is necessary to verify the performance by using a human body flat phantom. However, most of studies on the phantom are limited to the biological effects of mobile-phone EMF. In this paper, semi-solid phantoms having the electric properties suggested by FCC at MICS and ISM bands are fabricated. The manufactured phantoms satisfy the electric properties($\varepsilon_r=56.7$ and $\sigma=0.94$ at MICS band, $\varepsilon_r=52.7$ and $\sigma=1.95$ at ISM band) at each band. All the composing materials for phantoms are commercially available in domestic market. Two methods using both polyethylene powder and TX-151 and glycerin at each band are proposed for diverse purpose. The electrical properties of the fabricated phantoms are measured by a dielectric probe kit and network analyzer after the lapse of one day (24 hours).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.63-68
• /
• 2017

Although automated metro subway systems have the advantage of operating a train without a train driver, it is difficult to detect an immediate fault condition and take countermeasures when an unusual situation occurs. Therefore, it is important to construct a maintenance information system (MIS) that detects the vehicle failure/status information in real time and maintains it efficiently in the depot of the railway's vehicles. This paper proposes a conceptual design method that realizes the interface between the train control system (TCS), the operation control center train control monitoring system (OCC-TCMS) console, and the MIS using wireless communication network in real-time. To transmit a large amount of information on 800,000 occurrences per day during operation, data was collected in a 56 byte data table using a data processing algorithm. This state information was classified into 4 hexadecimal codes and transmitted to the MIS by mapping the status and the fault information on the vehicle during the main line operation. Furthermore, the transmission and reception data were examined in real time between the TCS and MIS, and the implementation of the failure information screen was then displayed.

• Journal of Korea Multimedia Society
• /
• v.13 no.5
• /
• pp.740-753
• /
• 2010

Performance of TCP can be severely degraded in WLP-based Mobile IP wireless networks where packet loss not related to network congestion occurs frequently during WLP-based inter-subnetwork handoff by user mobility. To resolve such a problem in the networks using WLP-based Mobile IP, the packet buffering method recovering seamlessly the packets dropped due to user mobility has been proposed. The packet buffering method at a bridge station recovers those packets dropped during handoff by forwarding buffered packets at the old bridge station to the WLP device. But, when the WLP device moves to a congested bridge station in a new WLP foreign subnetwork, those buffered packets forwarded by the old bridge station are dropped and TCP transmission performance of a WLP device in the congested bridge station degrades due to increased congestion by those forwarded burst packets. In this paper, a PBM(Packet Bridge Marker) is proposed for preventing buffered out-of-profile(OUT) packets from reducing the throughput of in-profile(IN) packets of an Assured Service WLP device. From this operation, the packet losses of buffered OUT packets are avoided and the throughput of IN and Total packets of an AS WLP device are increased.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.331-339
• /
• 2008

Nowadays with advancement in technology and aging society, the number of disabled citizens is increasing. The disabled citizens always need a caretaker for daily life routines especially for mobility. In future, the need is considered to increase more. To reduce the burden from the disabled, various devices for healthcare are introduced using computer technology. The power wheelchair is an important and convenient mobility device. The demand of power wheelchair is increasing for assistance in mobility. In this paper we proposed a robotic wheelchair for mobility aid to reduce the burden from the disabled. The main issue in an autonomous wheelchair is the automatic detection and avoidance of obstacles and going to the pre-designated place. The proposed algorithm detects the obstacles and avoids them to drive the wheelchair to the desired place safely. By this way, the disabled will not always have to worry about paying deep attention to the surroundings and his path. User has a handheld bio-sensor monitoring system for get user's bio-signal. If user detects unusual signal, alarm send to protector.

• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.350-359
• /
• 2011

Fast developments of broadcasting technologies since 1990s enabled not only High Definition Television service providing high quality audiovisual contents at home but also mobile broadcasting service providing audiovisual contents to high speed moving vehicle. Terrestrial Digital Multimedia Broadcasting (T-DMB) is one of the technologies developed for mobile broadcasting service, which has been successfully commercialized. One of the major technical breakthroughs achieved by T-DMB in addition to robust vehicular reception is an adoption of framework based on MPEG-4 System. It naturally enables integrated interactive data services by using Binary Format for Scene (BIFS) technology for scene description and representation of graphics object and Object Descriptor Framework representing multimedia service components as objects. T-DMB interactive data service has two fundamental limitations. Firstly, graphic data for interactive service should be always overlaid on top of a video not to be rendered out of it. Secondly, data for interactive service is only received by broadcasting channel. These limitations were considered as general in broadcasting systems. However, they are being considered as hard limitations for personalized data services using location information and user characteristics which are becoming widely used for data services of smart devices in these days. In this paper, the architecture of T-DMB hybrid data service is proposed which is utilizing broadcasting network, wireless internet and local storage for delivering BIFS data to overcome these limitations. This paper also presents hybrid BIFS technology to implement T-DMB hybrid data service while maintaining backward compatibility with legacy T-DMB players.

• Journal of KIISE:Databases
• /
• v.27 no.1
• /
• pp.53-63
• /
• 2000

The mobile computing service market is increasing rapidly due to the development of low-cost wireless network technology and the high-performance mobile computing devices. In recent years, several methods have been proposed to effectively deal with restrictions of the mobile computing environment such as limited bandwidth, frequent disconnection and short-lived batteries. Amongst those methods, much study is being done on the caching method - among the data transmitted from a mobile support station, it selects those that are likely to be accessed in the near future and stores them in the local cache of a mobile host. Existing cache replacement methods have some limitations in efficiency because they do not take into consideration the characteristics of user mobility and spatial attributes of geographical data. In this paper, we show that the value and the semantic of the data, which are stored in the cache of a mobile host, changes according to the movement of the mobile host. We argue it is because data that are geographically near are better suited to provide an answer to a users query in the mobile environment. Also, we define spatial location of geographical data has effect on, using the spatial attributes of data. Finally, we propose two new cache replacement methods that efficiently support user mobility and spatial attributes of data. One is based on the location of data and the other on the meaningful region of data. From the comparative analysis of the previous methods and that they improve the cache hit ratio. Also we show that performance varies according to data density using this, we argue different cache replacement methods are required for regions with varying density of data.