• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.448-452
• /
• 2007

Many industrial operations require continuous or nearly-continuous operation of machines, which if interrupted can result in significant financial loss. The condition monitoring of these machines has received considerable attention recent years. Rapid developments in semiconductor, computing, and communication with a remote site have led to a new generation of sensor called "smart" sensors which are capable of wireless communication with a remote site. The purpose of this research is the development of smart sensor using which can on-line perform condition monitoring. This system is addressed to detect conditions that may lead to equipment failure when it is running. Moreover it will reduce condition monitoring expense using low cost MEMS accelerometer. This sensor can receive data in real-time or periodic time from MEMS accelerometer. Furthermore, this system is capable for signal preprocessing task (High Pass Filter, Low Pass Filter and Gain Amplifier) and analog to digital converter (A/D) which is controlled by CPU. A/D converter that converts 10bit digital data is used. This sensor communicates with a remote site PC using TCP/IP protocols. Wireless LAN contain IEEE 802.11i-PSK or WPA (PSK, TKIP) encryption. Developed sensor executes performance tests for data acquisition accuracy estimations.

• 동력기계공학회지
• /
• 제12권6호
• /
• pp.18-23
• /
• 2008

This paper describes development of real-time condition monitoring system to observe state of a container crane in a port. To analyze the state of a crane, the strength and the direction of wind are measured with sensors along with the load resulted a crane at the moment. The measured signals are processed by especially developed conditioning board and converted into digital data. Measured data are analyzed to define the state of the crane at an indicator. For transmission of these data to the indicator, we implemented wireless sensor network based on IEEE 802.15.4 MAC(Media Access Control) protocol and Bluetooth network protocol. To extend the networking distance between the indicator and sensor nodes, the shortest path routing algorithm was applied for WSN(Wireless Sensor Network) networks. The indicator sends the state information of the crane to monitoring server through IEEE 802.11 b wireless LAN(Local Area Network). Monitoring server decides whether alarm should be issued or not. The performance of developed WSN and Bluetooth network were evaluated and analyzed in terms of communication delay and throughput.

• 한국전자통신학회논문지
• /
• 제15권2호
• /
• pp.245-252
• /
• 2020

예상치 못한 장비들의 결함은 우리 사회 전반에 막대한 경제적 손실을 초래하고, 이런 상황에서 상태 모니터링은 해결 가능한 방법을 제시할 수 있다. 상태 모니터링은 부착된 다양한 센서 데이터로부터 기계 고장을 예측하기 위해 신호 처리 알고리즘의 개발이 요구된다. 상태 모니터링에 사용되는 신호 처리 알고리즘은 높은 계산 효율과 고해상도를 요구하고 있다. 무선 센서 네트워크상(WSN)에서 상태 모니터링을 개선하기 위해서 데이터의 시각화는 데이터의 특징적인 표현을 극대화할 수 있다. 따라서 본 논문은 대규모 기반 시설에서 장비의 환경 상태를 식별하기 위해 WSN 기반의 상태 모니터링을 위한 온도 데이터의 시각적인 특징 추출을 제안한다. 실험 결과, 시간-주파수 분석은 시간에 따른 온도 변화를 시각적으로 확인할 수 있으며 온도 데이터 변화의 특징을 추출하는데 용이하였다.

• 한국소음진동공학회논문집
• /
• 제18권8호
• /
• pp.872-878
• /
• 2008

Many industrial operations require continuous or nearly-continuous operation of machines, interruption of which can result in significant cost loss. The condition monitoring of these machines has received considerable attentions in recent years. Rapid developments in semiconductor, computing, and communication with a remote site have led to a new generation of sensor called "smart" sensors which are capable of wireless communication with a remote site. The purpose of this research is to develop a new type of smart sensor for on-line condition monitoring. This system is addressed to detect conditions that may lead to equipment failure when it is running. Moreover it will reduce condition monitoring expense using low cost MEMS accelerometer. This system is capable for signal preprocessing task and analog to digital converter which is controlled by CPU. This sensor communicates with a remote site PC using TCP/IP protocols. The developed sensor executes performance tests for data acquisition accuracy estimations.

• 한국산학기술학회논문지
• /
• 제13권9호
• /
• pp.4186-4192
• /
• 2012

풍력발전기가 경제적, 환경적 요인에 따라 대형화, 해상화 되고 있어 접근이 어렵고, 부품 및 유지보수 비용이 증가하고 있다. 풍력발전기 상태 모니터링을 통하여 고장 요소를 최소화 하고, 고장 시 2차 사고를 예방하여 운영유지 및 보수비용을 낮추고 신뢰성을 증가시켜야 한다. 본 논문에서는 IEC 61400-25-2에서 표준으로 추진하는 풍력발전기 모니터링에 적합한 센서 중 실제 풍력발전기 상태 모니터링에 필요한 온도, 습도, 전압, 전류, 풍향, 풍속 센서를 ZigBee 무선 통신 소자와 결합하여 무선 센서노드를 구성하고 이를 이용한 간단한 네트워크를 통하여 센서 신호를 전송한다. 각 무선 센서노드에서 전송되는 신호는 라우터를 통하여 중앙 모니터링 터미널에 전송한다. 또한 LabVIEW로 신호를 수집 및 처리하고, TCP/IP 통신 변환을 통해 인터넷 환경이면 언제 어디서든지 사용자 및 관리자가 모니터링 할 수 있도록 한다.

• 한국정보통신학회논문지
• /
• 제13권8호
• /
• pp.1713-1720
• /
• 2009

본 논문은 산악지역이나 지역적으로 급작한 기후 변화를 일으키는 곳을 모니터링할 수 있는 시스템을 통하여 재난피해를 최소화시키기 위한 국지적 기상모니터링 시스템 개발에 관한 것이다. 우선 우리나라의 재해재난 관련 모니터링 시스템에 관한 연구 현황을 수집 및 분석하였으며, 이러한 국지 기상모니터링 시스템의 실현가능성과 장점에 대해 조사하였다. 또한, 외국의 사례들을 참조하여 무선센서 네트워크와 CDMA 망의 통합을 바탕으로 한 효율적인 국지 기상모니터링 시스템의 구축을 위한 방향을 제시 하였으며, 이러한 시스템을 위해 필요한 각종 데이터 수집을 위한 센서보드와 $20{\sim}200m$ 정도의 가까운 거리 마다 설치될 센서노드와 센서인터페이스, 전력공급장치 등에 대하여 조사하고, 제작하여 테스트하였다. 본 연구의 결과를 바탕으로 앞으로의 모니터링 시스템 관련 연구과제의 도출과 통합된 정보가 기상관측소, 방송국, 지역 재난경보시 템과 연결되어서 급작스런 기후변화나 또는 홍수 등의 위험 경보를 그 지역에 있는 관광객 및 거주자에게 휴대폰 또는 방송으로 알려주는 서비스를 통해 많은 연구 분야에서 활용될 수 있으리라 판단된다.

• International Journal of Advanced Culture Technology
• /
• 제9권4호
• /
• pp.409-416
• /
• 2021

We are invented the movement composition technique that is to check the food adjacent-package status of the wireless-management movement monitoring level (WMMML) on the movement monitoring communication system. The movement monitoring level condition by the movement monitoring communication system is formatted with the adjacent-package system. As to inspection a wireless RFID of the wireless RFID, we are found of the movement value with wireless RFID by the adjacent upper take form. The concept of movement monitoring level is formatted the reference of wireless-management level for composition signal by the movement package communication system. Further symbolizing a food composition of the WMMML of the medium-minimum in terms of the adjacent-package communication system, and the movement wireless RFID package that was the movement value of the far composition of the Mo-MMCS-FA-_φMED-MIN with 5.80±1.20 units, that was the movement value of the convenient composition of the Mo-MMCS-CO-_φMED-MIN with 4.06±(-0.04) units, that was the movement value of the flank composition of the Mo-MMCS-MO-_φMED-MIN with 0.91±0.07 units, that was the movement value of the vicinage composition of the Mo-MMCS-VI-_φMED-MIN with 0.18±(-0.03) units. The adjacent package will be to look into at the food ability of the adjacent-package communication system with wireless RFID by the movement monitoring level on the WMMML that is supply the wireless communication by the movement monitoring level system. We will be possible to make effort of a communication system by the management signal and to put to use of the delivery data of RFID level by the delivery system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.264-266
• /
• 2005

Recently, on-line diagnosis methods through wired and wireless networks are widely adopted in the diagnosis of industrial Electric Facilities, such as generators, transformers and motors. Also smart sensors which includes sensors, signal conditioning circuits and micro-controller in one board are widely studied in the field of condition monitoring. This paper suggests an self-powered system suitable for condition-monitoring smart sensors, which uses parasitic vibrations of the facilities as energy source. First, vibration-driven noise patterns of the electric facilities are presented. And then, an electromagnetic generator which uses mechanical mass-spring vibration resonance are suggested and designed. Finally energy consumption of the presented smart sensor, which consists of MEMS vibration sensors, signal conditioning circuits, a low-power consumption micro-controller, and a ZIGBEE wireless tranceiver, are presented. The usefulness and limits of the presented electromagnetic generators in the field of electric facility monitoring are also suggested.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.291-295
• /
• 2009

We did the blooth module test as a pre-test of wireless sensor monitoring system, which for the improving of on-condition maintenance reliability, on the train. In this test, we examined the communication environment of wireless sensor monitoring system by the acceleration date and frequency date in the real train structure during the operation. Also based on this results, we did the experimental verification of the sensor power system which use piezoelectric energy conversion technology by the theoretical modeling for the applying on the train on-condition maintenance.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.989-996
• /
• 2008

Recently, a few types of fish-cage in open sea are researched. This fish-cage has to operate monitoring system for keeping an optimum living condition for fish. The most efficient monitoring system is WVMS(Wireless Vision Monitoring System) for fish-cage in open sea. WVMS should be able to transmit video signal and communicate with each controller. So. it needs to be based on WLAN(Wireless LAN) which has characteristic of higher transfer-rate, In this paper, we propose a structure of WVMS using WLAN equipments for maritime environment and prove its effectiveness. We present the propagation loss model of WVMS's communication channel. measured by field test, and discuss its validity compared with the predictive value based on the Friss propagation model and Plane earth reflection model. We present the number of frames that is received from WLAN modem connecting with underwater-camera in field test spots. As a result, we confirmed that proposed WVMS is suitable for maritime environment and it is possible to be applied to fish-cage in open sea on 'seogwipo'.