• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.406-410
• /
• 2009

Power facilities of urban rail transit substation is deterioration, and endurance limitation is coming, so urban rail transit facilities should take any necessary measure for maintenance and repair. In this paper proposes online monitoring system using the wireless communications for the urban rail transit. This system is constructed various departments; such as sensor, measurement, data communication, host computer, and power departments. It is designed to collect and save AI (Analog Input) information of the power facilities, and to analyze and display them. As a result, it is possible to prevent from any unexpected power cuts and monitor my abnormalities in real time, and to collect accumulated data for creating a better management system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2140-2146
• /
• 2014

Ocean buoys are operated for safe navigation and collecting ocean data. Recently, to reducing marine buoy's damage by ocean weather's bad condition and collision with vessels has been conducted in several field research. This paper's experiment is buoy condition monitoring about predefined data form by users. As a result using Wireless remote control board applying a radio signal processing algorithms, it can observe buoy's state at an interval of three minutes on the land. Acquired data type is changeable according to ocean weather condition or buoy's purpose of using in advance. Also, this paper conducted an experiment such as data-transmission's stability and wireless communication's availability. As results of the analysis of the transmitted data, the solar, wind and wave power indicates the maximum amount of power, 50 W, 20 W and 40 W respectively. The communication system proven through this research can apply to buoy or other ocean facility.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.993-997
• /
• 2004

A data error inspection algorithm for wireless digital data communication was developed. Original data converted By wireless digital data error inspection algorithm. Wireless digital data is high possibility to get distortion and lose by noise and barrier on wireless. If the data check damaged and lost at receiver, can't make it clear and can't judge whether this data is right or not. Therefore, by wireless transmission data need the data error inspection algorithm in order to decrease the data distortion and lose and to monitoring the transmission data as real time. This study consists of RF station for wireless transmission, Water Level Meter station for water level measurement and Error inspection algorithm for error check of transmission data. This study is also that investigation and search for error inspection algorithm in order to wireless digital data transmission in condition of the least data's damage and lose. Designed transmitter and receiver with one - chip micro process to protect to swell the volume of circuit. Had designed RF transmitter - receiver station simply by means of ATMEL one - chip micro processing the systems. Used 10mW of the best RF power and 448MHz-449MHz on frequency band which is open to public touse free within the limited power.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.4
• /
• pp.333-337
• /
• 2010

This paper introduces an overall system design of a real-time monitoring system that monitors condition of urban railway AC/DC transformers, disconnecting switches, circuit breakers, regulators, and GIS (gas insulated switchgear). For effective diagnosis of urban railway facilities we developed optimized sensors and application technology. The proposed system is combined with wireless technology, implementing remote real-time monitoring of urban railway facilities. The derived real-time monitoring system for power facilities in urban railway substations will be applied not only to diagnose low voltage DC (direct current) railways but also to diagnose design of small power facilities of skyscrapers and apartments.

• The Journal of the Korea Contents Association
• /
• v.12 no.10
• /
• pp.22-34
• /
• 2012

In this paper, we design and implement an advanced cattle shed management system using a infrared wireless sensor nodes and surveillance camera. Our system provides three main capabilities, such as 24-hours cattle shed monitoring, trespassing detection, automatic control of cattle shed. For this, our system can monitor cattle shed as well as the condition of cows/bulls for 24 hours per day by using surveillance cameras. Our system also can detect intruders inside the cattle shed by using infrared wireless sensor nodes. In addition, our system can control the power of electric equipments in the cattle shed by using a power controller. Finally, we combine the three components into a system by using a smartphone application program and verify the effectiveness of our system by a testbed.

• Journal of Internet Computing and Services
• /
• v.20 no.1
• /
• pp.11-16
• /
• 2019

Wireless sensor network is important for precision farming to monitor the growth environment of crops in open field, but radio signals are susceptible to different types of interference such as weather and physical objects. This paper designs and implements an environmental monitoring and weather forecast acquisition systems for smart field irrigation based on LoRa(Long Range) and then applies it to a test bed. And we evaluate the network reliability in terms of packet transmission success rate by comparing its condition on two criteria; the existence of obstacle or rain. The results show that much rain falls can affect on packet loss in LoRa field networks with obstacles.

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1167-1175
• /
• 2021

The process of automation and monitoring in industrial control system involves the use of many types of sensors. A programmable logic controller plays an important role in the automation of the different processes in the power plant system. The major control units are boiler for temperature and pressure, turbine for speed of motor, generator for voltage, conveyer belt for fuel. The power plant units are controlled using microcontrollers and PLCs, but FPGA can be the feasible solution. The paper focused on the design and simulation of hardware chip to monitor boiler, turbine, generator and conveyer belt. The hardware chip of the plant is designed in Xilinx Vivado Simulator 17.4 software using VHDL programming. The methodology includes VHDL code design, simulation, verification and testing on Virtex-5 FPGA hardware. The system has four independent buzzers used to indicate the status of the boiler, generator, turbine motor and conveyer belt in on/off conditions respectively. The GSM is used to display corresponding message on the mobile to know the status of the device in on/off condition. The system is very much helpful for the industries working on plant automation with FPGA hardware integration.

• Journal of the korean society of oceanography
• /
• v.39 no.2
• /
• pp.148-154
• /
• 2004

This study describes the realtime monitoring system for water quality conditions in coastal waters. Some issues on the data qualify control and quality analysis are examined along with examples of erroneous data. Three different cases of database produced by the realtime monitoring system are presented and analyzed, namely 1) hypoxic condition, 2) over-saturated D.O. and 3) short-term variability of temperature and D.O. In utilizing the realtime database, D.O. prediction and warning models are developed based on autoregressive stochastic process. The model is very simple, yet, users in various levels from powerful and useful with its ability to send warning messages to users in varous levels from governmental administrative staff to local fisherman, and give them some allowances to cope with the situation.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1918-1923
• /
• 2010

In electic railway, 25kV is applied to AC sections of overhead contact lines and pantographs of Korea Train eXpress(KTX) make contact at speeds of 300km/h. Thus, there is a need to utilize wireless, optic, contact-less sensors to implement condition monitoring systems. This paper is based on describing and analyzing the condition monitoring system implementation technologies for efficient catenary current ratio characteristic assessment. The conclusion of this paper should be widely applied to design, diagnosis, completion of construction, current collection status, fault diagnosis, and selection of contact wires and suspension wires.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.595-618
• /
• 2010

This paper describes the application of a wireless sensor network to a 31 meter-tall medieval tower located in the city of Trento, Italy. The effort is motivated by preservation of the integrity of a set of frescoes decorating the room on the second floor, representing one of most important International Gothic artworks in Europe. The specific application demanded development of customized hardware and software. The wireless module selected as the core platform allows reliable wireless communication at low cost with a long service life. Sensors include accelerometers, deformation gauges, and thermometers. A multi-hop data collection protocol was applied in the software to improve the system's flexibility and scalability. The system has been operating since September 2008, and in recent months the data loss ratio was estimated as less than 0.01%. The data acquired so far are in agreement with the prediction resulting a priori from the 3-dimensional FEM. Based on these data a Bayesian updating procedure is employed to real-time estimate the probability of abnormal condition states. This first period of operation demonstrated the stability and reliability of the system, and its ability to recognize any possible occurrence of abnormal conditions that could jeopardize the integrity of the frescos.