• Spatial Information Research
• /
• v.16 no.2
• /
• pp.207-218
• /
• 2008

Providing services in a wireless environment with existing wired-based GIS solutions have many limitations such as slow communication, processing rates and screen size. This study suggested data optimization techniques in a mobile environment to overcome those limitations in four steps. In order to test the methods suggested in the study, experiments are conducted using Gangnam-gu as a test site. An existing GIS engine built in a wired environment was compared with the optimized GIS engine from the study in terms of performance in the same environment. They were also compared and analyzed in terms of response data size, number of requests processed per second, and average time to process a request. The results proved that the proposed engine shows significant improvements in performance compared with the wired GIS.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.127-134
• /
• 2011

Recently, the wireless data communication infrastructure appearing before the footlights crosses the limit in the wire and develop into the fast speed. Particularly, the issue about the u-Healthcare service using this increases. And the investigation of the quality guarantee of the wireless data network is important for the smooth service providing. However, the quality control research about the wireless network is insufficient because the existing research performs the quality control between the termination about the wired network continually. This paper presented the mobile service quality measurement reference considering the radio environment,that is the method for satisfying the quality guarantee of the wireless data network user offered the u-Healthcare service as the research about this and user needs. For this purpose, wireless data quality measurement indicator and standard was selected. The quality measure evaluation plan was presented according to the service. And each service presented the quality index especially.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.114-119
• /
• 2008

In this paper, a home network gateway has been developed, which supports the ZigBee and power line communication methods at the same time. A conversion protocol for smooth information exchange between ZigBee module and power line communication module have been implemented on the gateway, and the performance and reliability of the gateway have been evaluated as good through field tests. The gateway can support various home networks.

• Journal of Advanced Navigation Technology
• /
• v.11 no.2
• /
• pp.163-169
• /
• 2007

In this paper, we propose a method of trigger pulse generation to capture the image on time by making a synchronization between the x-ray generator and digital x-ray image acquisition system. we designed a wireless trigger pulse generation circuit to make a synchronization between x-ray generator and digital image acquisition system and analysis its performance. When it starts to detect a certain level of x-ray radiation or above from the air, this method starts to generate a ACQ_START signal to indicate the timing for image acquisition starting from digital image acquisition system. Hence, when it starts to detect under certain level of x-ray signal from the air, this method starts to generate a ACC_END signal to indicate the timing for image acquisition stop from digital image acquisition system. Image acquisition is activated only this time between ACQ_START and ACQ_END signal. By doing this wireless detecting of x-ray signal from remote, we can get more accurate timing for capturing the x-ray image and any type of x-ray generator can be connected to digital image acquisition system, regards of wired protocol. This makes easy installation. We could get 3.5 line pair / mm resolution at 20 mAs of x-ray level with resolution chart. This is same or better image comparing to conventional wired result.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.3
• /
• pp.42-48
• /
• 2016

Extensive research effort has been made during the last decade to utilize wireless smart sensors for evaluating and monitoring structural integrity of civil engineering structures. The wireless smart sensor commonly has sensing and embedded computation capabilities as well as wireless communication that provide strong potential to overcome shortcomings of traditional wired sensor systems such as high equipment and installation cost. However, sensor malfunctioning particularly in case of long-term monitoring and unreliable wireless communication in harsh environment are the critical issues that should be properly tackled for a wider adoption of wireless smart sensors in practice. This study presents a wireless smart sensor network(WSSN) that can estimate unmeasured responses for the purpose of data recovery at unresponsive sensor nodes. A software program that runs on WSSN is developed to estimate the unmeasured responses from the measured using the Kalman filter. The performance of the developed network software is experimentally verified by estimating unmeasured acceleration responses using a simply-supported beam.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.611-614
• /
• 2007

This paper suggests a TCP/IP-based remote data monitoring system, which combines PDA (Personal Digital Assistant) and WLAN (Wireless Local Area Network) technologies. Wireless PDA devices are used for remote monitoring of wireless communication by continuously collecting remote device data transmitted from servers such as temperature, humidity and device status, and displaying them on mobile devices. Therefore, remote data monitoring systems that integrate wireless and wired services provide data collection adaptive to administrators and efficient identification of device status.

• Smart Structures and Systems
• /
• v.19 no.1
• /
• pp.47-56
• /
• 2017

Considerable achievements in developing structural regulators as an important method for vibration control have been made over the last few decades. The use of large quantities of cables in traditional wired control systems to connect sensors, controllers, and actuators makes the structural regulators complicated and expensive. A wireless decentralized control experimental platform based on Wi-Fi unit is designed and implemented in this study. Centralized and decentralized control strategies as sample controllers are employed in this control system. An optimal control algorithm based on Kalman estimator is embedded in the dSPACE controller and the DSP controller. To examine the performance of this control scheme, a three-story steel structure is developed with active mass dampers installed on each floor as the wireless communication platform. Experimental results show that the wireless decentralized control exhibits good control performance and has various potential applications in industrial control systems. The proposed experimental system may become a benchmark platform for the validation of the corresponding wireless control algorithm.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.635-635
• /
• 2006

• International journal of advanced smart convergence
• /
• v.8 no.2
• /
• pp.218-226
• /
• 2019

The use of Information and Communication Technologies (ICT) is the key to operate a change from the traditional manual reading of water meters and sensors to an automated system where high frequency data is remotely collected and analyzed in real time, one of the main components of a Smart Water Grid. The recent boom of ICT offers a wide range of both wired and wireless technologies to achieve this objective. We review and present in this article the most widely recognized technologies and protocols along with their respective advantages, drawbacks and applicability range which can be Home Area Network (HAN), Building Area Network (BAN) or Local/Neighborhood Area Network (LAN/NAN). We also present our findings and we give recommendations on the application of ICT in Smart Water Grids and future work needed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.755-760
• /
• 2023

In this paper, the 2.4/5GHz dual band was used to ensure the reliability and stability of the wireless AV surveillance system using the existing 2.4GHz band. The proposed system supports dynamic channel allocation and channel change technology to avoid interference from other signals (Wifi, Bluetooth, etc.), reduces maintenance costs incurred when building wireless CCTV, and can be linked with existing wired CCTV. The service area of the A/V surveillance system used can be expanded.