• Journal of Periodontal and Implant Science
• /
• 제37권4호
• /
• pp.805-824
• /
• 2007

Purpose: Developments in micro/macrostructures of implants and surgical techniques brought out stable outcomes of implant dentistry. The aim of this study was to evaluate the distributions of implant patients, the types of implanted sites, and the success or survival rates of various implant systems and to analyze the implant placement done at each specificintraoral site and situation. Materials and Methods: The data of dental implantations collected between 1992 and 2006 at the Department of Periodontology in 00000 University Hospital were analyzed. Results: 1. Largest part of the patients were at the age of 40s and 50s in bothgender who lost their teeth mostly by periodontaldiseases and caries at the posterior intraoral sites as major ones. Bone densities of type II(mandible) and III(maxilla) were likely to be seen with quantity of type B. Lengths of the implants between 10 and 15 mm and wide platform took the largest part. 2. Survival rates of $Implantium^{(R)}(98.8%)$, $Xive^{(R)}(100%)$ and ITI $TE^{(R)}(100%)$ were high when $Frialit-2^{(R)}$ showed 82%(poor bone density area) or 87.2%(combined with additional therapy). $IMZ^{(R)}$ had lowest cumulative survival(67.5%) and success rate(49.4%) amongst all. 3. Replacement with 2 wide or 3 regular platforms showed no significant differences in survival rate and marginal bone loss atmandibular posterior area. In single restoration of mandibular second molar, 5-year success rate of machined surface $Br{\aa}nemark^{(R)}(70.37%)$ was lower than that of rough surface $ITI^{(R)}$ SLA(100%). 4. Replacement of single tooth in anterior area showed high survival rate of 94.5%. 5. The success rates of $Br{\aa}nemark$ Ti-Unite and ITI SLA at posterior maxilla with poor bone density both showed stable outcomes. 6. 10-year cumulative survival rate of implants with maxillary sinus augmentation by lateral window approach appeared to be 96.60%. Low survival rate(75%) was shown when there were more than two complications combined. Height of grafted bone remained stable above the implant apex. Conclusions : Rough surfaced implants showed stable outcomes in most of the situation including poor bone density and additional therapy combined.

• Journal of the Optical Society of Korea
• /
• 제16권1호
• /
• pp.1-5
• /
• 2012

This paper describes a 150-Mb/s monolithic optical receiver for plastic optical fiber link using a standard CMOS technology. The receiver integrates a photodiode using an N-well/P-substrate junction, a pre amplifier, a post amplifier, and an output driver. The size, PN-junction type, and the number of metal fingers of the photodiode are optimized to meet the link requirements. The N-well/P-substrate photodiode has a 200-${\mu}m$ by 200-${\mu}m$ optical window, 0.1-A/W responsivity, 7.6-pF junction capacitance and 113-MHz bandwidth. The monolithic receiver can successfully convert 150-Mb/s optical signal into digital data through up to 30-m plastic optical fiber link with -10.4 dBm of optical sensitivity. The receiver occupies 0.56-$mm^2$ area including electrostatic discharge protection diodes and bonding pads. To reduce unnecessary power consumption when the light is not over threshold or not modulating, a simple light detector and a signal detector are introduced. In active mode, the receiver core consumes 5.8-mA DC currents at 150-Mb/s data rate from a single 3.3 V supply, while consumes only $120{\mu}W$ in the sleep mode.

• 한국태양에너지학회 논문집
• /
• 제22권4호
• /
• pp.1-9
• /
• 2002

This study is on the design and evaluation of Zero Energy Solar House(ZeSH) including active solar heating system. Various innovative technologies such as super insulation, passive solar systems, super window, ventilation heat recovery system...etc were analyzed by individual and combination for the success of ZeSH. The ESP-r simulation program was used for this. Simulation results shows that almost 77% of heating load can be reduced with the following configuration of 200mm super insulation, super windows, passive solar system and 0.3 ventilation rate per hour. Active solar heating system (ASHS) was designed for the rest of the heating load including hot water heating load. The solar assisted heat pump is used for the auxiliary heating device in order to use air conditioner but not included in this study. The yearly solar fraction is 87% with a solar collector area of $28m^2$. The parametric studies as the influence of storage volume and collector area on the solar fraction was analyzed.

• 대한구순구개열학회지
• /
• 제4권2호
• /
• pp.69-78
• /
• 2001

Alveolar cleft exists in 75% of cleft patients, In alveolar cleft patients, alar base is widening, palatal fistular formation, maxillary growth disturbance & tooth loss of adjacent area is raised, Alveolar bone grafting, especially iliac bone grafting, is a general treatment method. As operation timing, bone grafting is classified with primary, early secondary, secondary, & late secondary, Here we report cleft width, marginal bone height, bone resorption rate, grafted shape & bone densities after secondary iliac bone grafting was done in the Dept. of oral and maxillofacial surgery of chonbuk national university hospital. We compared cleft width to bone resorption rate and grafted shape. Also, alveolar bone densities of grafted and contralateral site was compared with Emago 3 package? (Oral Diagonostic System, The Netherlands), The data obtained were analyzed using Spearman's rho coefficients and sign test with SPSS for window, The results were obtained as follows. 1. As alveolar cleft width is increase, bone resorption rate is, too. This relation showed significant difference(P<.01). 2, In proximal & distal area, alvolar cleft width and bone graft contour after bone grafting had a reverse proportional difference. It was not significant difference(P>.05). 3. After 3 month, in bone density results by using Emago 3 package? with periapical standard view, occlusal view & panoramic view, differences between grafted bone and alveolar bone of contralateral site didn't show a significant difference(P>.05). Thus, differences of bone densities in the alveolar bones didn't exist.

• 한국항행학회논문지
• /
• 제25권5호
• /
• pp.363-369
• /
• 2021

본 논문에서는 텔레메트리 시스템을 위한 가변 컷 오프 주파수 및 가변 샘플레이트 특성을 지니는 저면적 다채널 디지털 필터구조를 제안한다. 제안하는 디지털 필터는 임의의 컷 비율에 대해 필터 뱅크의 추가적인 설계 없이 컷 오프 주파수와 샘플레이트를 가변적으로 사용할 수 있는 필터 뱅크를 구현함으로써 하드웨어 면적을 줄일 수 있었다. 또한, 멀티플렉서 (MUX; Multiplexer) 컨트롤을 통해 통과하는 필터의 개수에 따라 샘플레이트를 가변적으로 선택할 수 있는 구조를 제안한다. 제안하는 디지털 필터는 Quartus의 FIR (finite impulse response) IP (intellectual property)의 TDM (time division multiplexing)을 이용함으로써, TDM을 사용하지 않았을 때보다 면적이 큰 DSP (digital signal processing) 블록을 80개에서 1개로 줄일 수 있었다. Kaiser 창 함수를 이용하여 Matlab을 통해 필터의 차수와 계수를 계산하였으며, VHDL (very high speed integrated circuits hardware description language)을 통해 하드웨어로 구현하였다. 텔레메트리 시스템에 적용 후, 실험 결과를 통해 제안하는 디지털 필터가 정상적으로 동작하고 있음을 확인하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.35.1-35.1
• /
• 2010

The Cu(In,Ga)Se2(CIGS) thin film solar cells have been achieved until almost 20% efficiency by NREL. These solar cells include chemically deposited CdS as buffer layer between CIGS absorber layer and ZnO window layer. Although CIGS solar cells with CdS buffer layer show excellent performance, many groups made hard efforts to overcome its disadvantages in terms of high absorption of short wavelength, Cd hazardous element. Among Cd-free candidate materials, the CIGS thin film solar cells with Zn compound buffer layer seem to be promising with 15.2%(module by showa shell K.K.), 18.6%(small area by NREL). However, few groups were successful to report high-efficiency CIGS solar cells with Zn compound buffer layer, compared to be known how to fabricate these solar cells. Each group's chemical bah deposition (CBD) condition is seriously different. It may mean that it is not fully understood to grow high quality Zn compound thin film on the CIGS using CBD. In this study, we focused to clarify growth mechanism of chemically deposited Zn compound thin film on the CIGS, especially. Additionally, we tried to characterize junction properties with unfavorable issues, that is, slow growth rate, imperfect film coverage and minimize these issues. Early works reported that film deposition rate increased with reagent concentration and film covered whole rough CIGS surface. But they did not mention well how film growth of zinc compound evolves homogeneously or heterogeneously and what kinds of defects exist within film that can cause low solar performance. We observed sufficient correlation between growth quality and concentration of NH3 as complex agent. When NH3 concentration increased, thickness of zinc compound increased with dominant heterogeneous growth for high quality film. But the large amounts of NH3 in the solution made many particles of zinc hydroxide due to hydroxide ions. The zinc hydroxides bonded weakly to the CIGS surface have been removed at rinsing after CBD.

• KIEAE Journal
• /
• 제15권2호
• /
• pp.27-35
• /
• 2015

Purpose: Healthcare is on the whole a personal and critical service that consumer's use, whereas hospitalization is as a rule painful, because nature nurtures and Sun Light Luminosity for healthcare settings is considered healing. The performance and design of climate responsive buildings such as AKU requires a detailed study of attributes of climate both at micro as well as macro level. The therapeutic value of contact with nature through window view, greenery and landscape is calculated there. Method: A two prong strategy is been devised for this article, at micro level three typical morphologies are analysed by creating same environment of neighboring building on sun shading chart, radiation and temperature range. Since the analysis of local climate helps to determine the design strategies for hospital Healing Environment which is suitable for Karachi climate; in order to track the macro climatic behaviour, a considerable analysis of psychometrics chart for AKU Karachi are designed on Climate Consultant (CC) and analysed by Machine Learning. Climate Consultant proposes different design strategies suitable for Karachi. And on the other hand time wise illumination sources for clinical area which are then measured on psychrometric chart- according to singular space: multi patient admission, secondly: acute ambulatory ward, and tertiary: multi windowed space according to the mushrabiyah and sky light pattern. Result: Our findings support the hypothesis that windowed wall is 75-80% more healing wall; an accelerated evidence was found for healing at macro level if the form of the hospital is designed according to the climatologically preferences, whereas at micro level: the light resource becomes the staff attentiveness determinant. In Conclusion evidence was provided that the actual form of luminosity results consequently in satisfaction while light entering from several set of windows and other sources might be valued if design according to the healing environment. The data added on the sun shading chart to calculate rays entraining into space in patient room equal to 124416.21 Watts/ meter $m^2$ is calculated as precise healing rate-and is confirmed by questionnaire from patients belonging from each clinical stage having different illnesses.

• 전자공학회논문지
• /
• 제52권9호
• /
• pp.45-53
• /
• 2015

적응적 가중치 윈도우 알고리즘은 기존의 지역적 정합방법의 단점인 낮은 정합률을 보완하면서 전역적 방법에 비하여 실시간 하드웨어 설계가 용이하다는 장점을 갖고 있다. 본 논문에서는 객체를 분리하는데 더 유리한 지오데식 가중치 윈도우 알고리즘을 사용하여 실시간 처리가 가능한 시스템을 설계하였다. 효율적인 하드웨어 설계와 처리 효율을 높이기 위해 데이터 의존성에 따른 스케줄링을 분석하였고 계산시간이 가장 긴 가중치 계산을 기준으로 계산 단계를 최소화하여 병렬 처리를 적용하였다. 지수함수 연산은 에러분석을 기반으로 계단(step) 함수로 구현하여 하드웨어 자원을 줄이고 설계 효율을 높였다. 설계한 시스템은 verilogHDL로 설계되었으며 동부하이텍 0.18um 라이브러리를 사용하여 Synopsis를 통해 합성하였고 츠쿠바 영상을 기준으로 2.22%의 에러율과 260MHz(25fps)의 최대 동작주파수, 182K 게이트의 하드웨어 자원을 사용한다.

• 생물환경조절학회지
• /
• 제20권2호
• /
• pp.78-82
• /
• 2011

온실의 환기설계 기준 설정 및 단동 플라스틱 온실의 원형 천창 설치 가이드라인 제정을 위한 기초자료를 제공할 목적으로 천창이 설치된 토마토 재배 단동 온실에서 환기실험을 통하여 자연환기 성능을 분석하고, 열평형 모델을 이용하여 온실 재배 토마토의 증발 추정하였다. 직경 60cm의 원형 천창을 지붕의 중앙에 8m 간격으로 설치한 단동온실의 자연환기 성능을 실험한 결과 환기회수는 분당 0.02~0.32회(평균 0.17회 $min^{-1}$)의 범위를 보여 상당히 낮은 것으로 나타났다. 그러나 상업용 온실의 권장환기율과 비교하면 6m 간격으로 설치할 경우에는 봄이나 가을철에 필요한 환기량을 충족할 수 있을 것으로 판단되며, 여름철 권장환기를 위해서는 2m 정도의 간격으로 설치한 해야만 가능할 것으로 판단되므로 광투과를 저해하지 않으면서 지붕의 개구면적을 확대할 수 있는 방안을 찾아야 할 것으로 생각된다. 실험에 사용한 단동 온실은 인접 동 간격이 1.2m에 불과한 밀집된 단지 내에 위치하고 있어서 측창 주변의 외부 풍속이 최대 $0.9m{\cdot}s^{-1}$(평균 $0.4m{\cdot}s^{-1}$에 불과하고 풍력에 의한 환기효과를 기대하기가 어려웠다. 환기량과 풍속 및 실내외 온도차와의 관계를 비교 분석해 본 결과 중력환기가 우세함을 확인 할 수 있었다. 본 환기실험 자료를 온실의 환기설계를 위한 열평형모델에 적용하여 증발산계수를 추정해 본 결과 0.39~0.85의 범위(평균 0.62)를 보였고, 다른 연구자들이 제시하는 일반적인 온실의 설계 권장 값과 유사한 경향을 나타냈다. 따라서 토마토 재배 단동 플라스틱 온실의 환기설계에서 증발산계수는 0.6 정도를 사용하면 적당할 것으로 판단된다.

• 한국학교ㆍ지역보건교육학회지
• /
• 제12권3호
• /
• pp.43-64
• /
• 2011

Objectives: The purpose of this study was to provide the nutritional education data of the fruit and vegetable eating habits and dietary fiber intake of male and female high school students in the Daegu area. Methods: A survey was conducted on 300 male/female students from four general high schools in the City of Daegu, and the survey included questions ongeneral characteristics, dietary habits, eating behavior patterns and dietary intake. A 24-hour recall method was used for the dietary intake, and the surveyed dietary intake information was analyzed using the Computer Aided Nutritional analysis program (CAN 3.0)--dietary fiber intake, in particular. The data was analyzed using the SPSS window 12.0 program. Results: The average ages of boys and girls were 16.8- and 15.6-years old, respectively. A classification based on BMI showed the following: the low-weight student group was comprised of 10.3% boys and 31.6% girls; the normal-weight group 68.4% boys and 67.5% girls; and the overweight group 21.3% boys and 0.9% girls, whereby showing a significant difference between boys and girls. Vegetable intake showed the following: the ratio of the response of 'taking it once a day' was more than 70%, which showed the low frequency of fruit intake; the ratio of 'taking it more than five times a week' was 53.0% for boys and 68.4% for girls, which showed a higher intake frequency for girls over boys; and the daily dietary fiber per 1,000kcal was 7.1g for boys and 8.2g for girls, whereby showing a significant difference between boys and girls. The meals that contributed most to dietary fiber intake were the school meals, whereas the dietary fiber intake rate through breakfast was the lowest among the three daily meals. The food groups that contributed to dietary fiber intake were vegetable, grains and flavoring matters for boys and vegetable, grains and fruits for girls. Conclusions: In order to increase the daily dietary intake for growing adolescents, who are in an important stage for building the foundation of health, it's recommended that, in addition to the supplement for insufficient dietary fiber through a regular breakfast consisting of high dietary fiber content foods, nutrition-related education about the effects of dietary fiber on the human body be conducted.