• Wind and Structures
• /
• 제8권6호
• /
• pp.389-406
• /
• 2005

The results of reference wind speed calculation in Croatia as a base for the revision of the Croatian standards for wind loads upon structures are presented. Wind speed averaged over 10 minutes, at 10 m height, in a flat, open terrain, with a 50-year mean return period is given for 27 meteorological stations in Croatia. It is shown that the greatest part of Croatia is covered with expected reference wind speeds up to 25 m/s. Exceptions are stations with specific anemometer location open to the bura wind which is accelerated due to the channelling effects of local orography and the nearby mountain passes where the expected reference wind speed ranges between 38 m/s and 55 m/s. The methodology for unifying all available information from wind measurements regardless of the averaging period is discussed by analysing wind speed variability at the meteorological station in Hvar.

• 대한기계학회논문집B
• /
• 제37권4호
• /
• pp.423-429
• /
• 2013

수직축 풍력발전기의 발전 전력을 유동해석을 이용하여 예측하였다. 해석은 블레이드 회전 속도를 고정하고 그 회전 속도에서 토크를 반력으로 추출하였다. 여러 경우의 블레이드의 회전 속도에 대해 토크를 구하고 발전 용량을 계산하였다. 회전 속도에 따른 발전 토크와 발전 용량을 계산함으로써 최적의 발전기와 그 때의 회전 속도를 선정할 수 있었다. 또한, 블레이드의 개수와 블레이드의 형상에 대해 해석을 수행하여 그 영향을 분석하였다. 마지막으로 실험을 수행하여 그 결과를 비교하였다.

• 환경영향평가
• /
• 제16권2호
• /
• pp.157-168
• /
• 2007

In case there is a need to run the multi-year urban scale air qulaity model, it is a difficult task due to the computational demand, requiring the statistical approach for the long time atmospheric environmental assessment. In an effort to approach toward long term urban assessment, the sixteen synoptic meteorological conditions are statistically classified from the estimated geostrophic wind speeds and directions of 850 hPa geopotential height field during 2000 ~ 2005. The geostrophic wind directions are subdivided into four even intervals (north, east, south, and west), geostrophic wind speeds into two classes(${\leq}5m/s$ and >5m/s), and daily mean cloud amount into 2 classes(${\leq}5/10$ and >5/10), which result into sixteen classes of the synoptic meteorological cases for each season. The frequency distributions for each 16 synoptic meteorological case are examined and some discussions on how these synoptic classifications can be used in the environmental assessment are presented.

• Wind and Structures
• /
• 제14권3호
• /
• pp.221-238
• /
• 2011

The estimated response of large-scale engineering structures to severe wind loads is prone to modelling uncertainties that can only ultimately be assessed by full-scale testing. To this end ambient vibration data from full-scale monitoring of the historic Clifton Suspension Bridge has been analysed using a combination of a frequency domain system identification method and a more elaborate stochastic identification technique. There is evidence of incipient coupling action between the first vertical and torsional modes in strong winds, providing unique full-scale data and making this an interesting case study. Flutter derivative estimation, which has rarely previously been attempted on full-scale data, was performed to provide deeper insight into the bridge aerodynamic behaviour, identifying trends towards flutter at higher wind speeds. It is shown that, as for other early suspension bridges with bluff cross-sections, single-degree-of-freedom flutter could potentially occur at wind speeds somewhat below requirements for modern designs. The analysis also demonstrates the viability of system identification techniques for extracting valuable results from full-scale data.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권1호
• /
• pp.24-33
• /
• 2010

Design of a Pump Jet Propulsor (PJP) was undertaken for an underwater body with axisymmetric configuration using axial/low compressor design techniques supported by Computational Fluid Dynamics (CFD) analysis for performance prediction. Experimental evaluation of the PJP was earned out through experiments in a Wind Tunnel Facility (WTF) using momentum defect principle for propulsive performance prior to proceeding with extensive experimental evaluation in towing tank and cavitation tunnel. Experiments were particularly conducted with respect to Self Propulsion Point (SPP), residual torque and thrust characteristics over a range of vehicle advance ratio in order to ascertain whether sufficient thrust is developed at the design condition with least possible imbalance torque left out due to residual swirl in the slip stream. Pumpjet and body models were developed for the propulsion tests using Aluminum alloy forged material. Tests were conducted from 0 m/s to 30 m/s at four rotational speeds of the PJP. SPP was determined confirming the thrust development capability of PJP. Estimation of residual torque was carried out at SPP corresponding to speeds of 15, 20 and 25 m/s to examine the effectiveness of the stator. Estimation of thrust and residual torque was also carried out at wind speeds 0 and 6 m/s for PJP RPMs corresponding to self propulsion tests to study the propulsion characteristics during the launch of the vehicle m water where advance ratios are close to Zero. These results are essential to assess the thrust performance at very low advance ratios to accelerate the body and to control the body during initial stages. This technique has turned out to be very useful and economical method for quick assessment of overall performance of the propulsor and generation of exhaustive fluid dynamic data to validate CFD techniques employed.

• Wind and Structures
• /
• 제38권3호
• /
• pp.193-202
• /
• 2024

Modern high-rise tower designs incorporating recessed balcony cavity spaces can be prone to high-frequency and narrow-band Rossiter aerodynamic excitations under glancing incident winds that can harmonize and compete with recessed balcony volume acoustic Helmholtz modes and facade elastic responses. Resulting resonant inertial wind loading to balcony facades responding to these excitations is additive to the peak design wind pressures currently allowed for in wind codes and can present as excessive facade vibrations and sub-audible throbbing in the serviceability range of wind speeds. This paper presents a methodology to determine Cavity Amplification Factors to account for façade resonant inertial wind loads resulting from balcony cavity aero-acoustic-elastic resonances by drawing upon field observations and the results of full-scale monitoring and model-scale wind tunnel tests. Recessed balcony cavities with single orifice type openings and located within curved façade tower geometries appear particularly prone. A Cavity Amplification Factor of 1.8 is calculated in one example representing almost a doubling of local façade design wind pressures. Balcony façade and tower design recommendations to mitigate wind induced aero-acoustic-elastic resonances are provided.

• 대한기계학회논문집A
• /
• 제35권1호
• /
• pp.11-15
• /
• 2011

본 논문은 풍력터빈의 출력 제어 방법에 관한 논문이다. MW급 풍력 터빈 출력제어의 기본 제어 구조는 가변속도 가변피치 방식을 사용한다. 가변속도 가변피치 제어는 파워 커브를 추종하기 위한 방법으로서, 풍속변화에 따라 이 제어방식이 어떻게 적용되는지 논의한다. 제어 시스템 설계를 위하여 단순화된 드라이브 트레인 모델이 사용되었다. 제어 시스템은 토크제어와 피치제어로 구성되고, 제시된 동적 모델을 사용하여 설계된 제어 시스템의 시뮬레이션 결과에 대하여 논의한다.

• 한국안전학회지
• /
• 제36권1호
• /
• pp.9-17
• /
• 2021

This study analyses the load imbalance of the tower crane used in telescoping work for structural safety, owing to the difference in wind speed and balance weight position. This is because wind speed and position of the balance weight have a significant impact on the structural stresses of a tower crane during telescoping work. Therefore, structural analysis was performed on the 290HC model, which is often used at construction sites and has only one cylinder installed. Moreover, two models were classified to determine the load acting on the connecting part of the telescopic cage to slewing platform and the cylinder. Five types of balance weight positions were applied at regular intervals from jibs; moreover, four types of wind load criteria were differently applied. Hence, the telescopic cage columns were destroyed at all balance weight positions at a wind speed of 30 m/s and only at certain locations at a wind speed of 20 m/s. Furthermore, failures occurred for cylinders, torsional, and bending at wind speeds of 30 m/s and 20 m/s, load imbalances above the allowable thresholds considering the safety factor. In addition, the load imbalance in the telescoping work also varied depending on the position of the balance weights. The results of these studies have validated that the current standards of adjusting the appropriate position of the balance weights on the jib are completely valid, with the telescoping work to be executed only at wind speeds of less than equal to 10 m/s.

• Wind and Structures
• /
• 제34권2호
• /
• pp.231-257
• /
• 2022

Transmission lines systems are important components of the electrical power infrastructure. However, these systems are vulnerable to damage from high wind events such as hurricanes. This study presents the results from a 1:50 scale aeroelastic model of a multi-span transmission lines system subjected to simulated hurricane winds. The transmission lines system considered in this study consists of three lattice towers, four spans of conductors and two end-frames. The aeroelastic tests were conducted at the NSF NHERI Wall of Wind Experimental Facility (WOW EF) at the Florida International University (FIU). A horizontal distortion scaling technique was used in order to fit the entire model on the WOW turntable. The system was tested at various wind speeds ranging from 35 m/s to 78 m/s (equivalent full-scale speeds) for varying wind directions. A system identification (SID) technique was used to evaluate experimental-based along-wind aerodynamic damping coefficients and compare with their theoretical counterparts. Comparisons were done for two aeroelastic models: (i) a self-supported lattice tower, and (ii) a multi-span transmission lines system. A buffeting analysis was conducted to estimate the response of the conductors and compare it to measured experimental values. The responses of the single lattice tower and the multi-span transmission lines system were compared. The coupling effects seem to drastically change the aerodynamic damping of the system, compared to the single lattice tower case. The estimation of the drag forces on the conductors are in good agreement with their experimental counterparts. The incorporation of the change in turbulence intensity along the height of the towers appears to better estimate the response of the transmission tower, in comparison with previous methods which assumed constant turbulence intensity. Dynamic amplification factors and gust effect factors were computed, and comparisons were made with code specific values. The resonance contribution is shown to reach a maximum of 18% and 30% of the peak response of the stand-alone tower and entire system, respectively.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.263-264
• /
• 2006

In this study, the threshold wind speed that causes physical damage on Kiwi fruit plant was investigated through wind tunnel experiments. Total 30 samples of Kiwi fruit branches were tested. On average, the wind speeds for tearing leaves and breaking side branch from the main branch were about 20m/s and 21.7m/s, respectively. For the cases of broken branches, the average length and diameter of the branches were 587.5mm and 7.2mm, respectively. The discoloration and dehydration of Kiwi plant were also observed by photographing leaves and branches after 24 hour later of the wind damage. In addition, the shelter effect of porous wind fences which have been used at agricultural districts was examined with varying several parameters.