• 한국대기환경학회지
• /
• 제22권1호
• /
• pp.73-84
• /
• 2006

Hazardous Air Pollutants (HAPs) are characterized by being relatively heavier and denser than that of ambient air due to the various reasons such as higher molecular weight, low temperature and other complicated chemical transformations (Witlox, 1994). In an effort to investigate transport and diffusion from instantaneous emission of heavy gas, Lagrangian Particle Dispersion Model (LPDM) coupled with the RAMS output was employed. Both deposition process and buoyancy term were added on the atmospheric diffusion equations of LPDM, and the locations and concentrations of dense gas particle released from instantaneous single point source (emitting initially for 10 minutes only) were analyzed. The result overall shows that adding deposition process and buoyancy terms on the diffusion equation of LPDM has very small but detectable effect on the vertical and horizontal distribution of Lagrangian particles that especially transported for a fairly long traveling time. Also the slumping of dense gas can be found to be ignored horizontally compared to the advection by the horizontal wind suggesting that it was essential to couple the Lagrangian particle dispersion model coupled with the RAMS model in order to explain the dispersion of HAPs more accurately. However, during the initial time of instantaneous emission, buoyancy term play an important role on the vertical locations of dense particles for near surface atmosphere and around source area, indicating the importance of densities of HAPs in the beginning stage or short duration for the risk assessment of HAPs or management of heavy vapors during the explosive accidents.

• 농촌계획
• /
• 제22권4호
• /
• pp.71-80
• /
• 2016

Meanwhile, reference evapotranspiration(ET0) is important information for agricultural management including irrigation planning and drought assessment, the database of reference evapotranspiration for future periods was rarely constructed especially at districts unit over the country. The Coupled Model Intercomparison Project Phase 5 (CMIP5) provides several meteorological data such as precipitation, average temperature, humidity, wind speed, and radiation for long-term future period at daily time-scale. This study aimed to build a database for reference evapotranspiration using the climate forecasts at high resolution (the outputs of HadGEM3-RA provided by Korea Meteorological Administration (KMA)). To estimate reference evapotranspiration, we implemented four different models such as FAO Modified Penman, FAO Penman-Monteith, FAO Blaney-Criddle, and Thornthwaite. The suggested database system has an open architecture so that user could add other models into the database. The database contains 5,050 regions' data for each four models and four Representative Concentration Pathways (RCP) climate change scenarios. The developed database system provides selecting features by which the database users could extract specific region and period data.

• 한국농공학회논문집
• /
• 제60권3호
• /
• pp.15-25
• /
• 2018

Estimating the reference evapotranspiration is an important factor to consider in irrigation system design and agricultural water use. However, there is a limitation in using the FAO Penman-Monteith (FAO P-M) equation, which requires various meteorological data. The purpose of this study is to compare three reference evapotranspiration (ETo) equations in the case of meteorological data missing for 11 study weather stations. Firstly, the FAO P-M equation is used for reference potential evapotranspiration estimation with the actual solar radiation data $R_n$ and the actual vapor pressure $e_a$. Then, in the case of $R_n$, and $e_a$ are missed, the reference evapotranspirations applying FAO P-M, Priestley-Taylor (P-T), Hargreaves (HG) equation were calculated using other meteorological factors. Secondly, MAE, RMSE, $R^2$ were calculated to compare ETo relationship from the ETo equations. From the results, ETo with Hargreaves equation in coastal areas and the Priestley-Taylor equation in the inland areas showed relatively high correlation with FAO P-M when $e_a$ data is missed. In the case of $R_n$ data is missed or two weather data, $e_a$, and $R_n$ data are all missed, $R^2$ value in Priestley-Taylor equation was highest in coastal areas, and $R^2$ values in Hargreaves equation were the high values for 7 inland areas. The results of sensitivity analysis showed that net radiation was the most sensitive for P-T and HG equation, and for FAO P-M, the most sensitive factor was net radiation and relative humidity, air temperature and wind speed were follows. Therefore, in considering of the accessibility to the coast, the types of the missing wether data, and the correlation and the magnitude of error, the reference evapotranspiration equations would be selected in sense of different conditions.

• 한국응용과학기술학회지
• /
• 제36권4호
• /
• pp.1080-1087
• /
• 2019

화학물질 취급공정에서 발생하는 화학사고를 예방하기 위해 기본적으로 요구되는 위험성 분석 (Risk Analysis)시 공정의 특성을 잘 반영하는 것이 매우 중요하다. 본 연구에서는 CFD (computational fluid dynamics) 언어를 활용하여 화학공장의 고위험 공정을 대상으로 신뢰성 있는 사고 피해 결과를 분석하고 안전확보 방안을 제시하였다. 이를 위한 방법론적 사례로 화학공장의 RHDS (잔사유수첨탈황공정) 공정을 대상으로 실제공정의 운전조건, 설비 및 장치의 형태와 밀집도, 대기상태, 바람의 영향 등 여러 복합적 변수를 고려하여 FEA (Finite Element Analysis)와 CFD 시뮬레이션을 수행하여 확산, 폭발 시뮬레이션을 수행하였으며, 3D Scanning 기술, 누출공 크기 산정, 누출량 산정을 위한 CFD 적용 가능성을 검토하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.31-36
• /
• 2009

There have been many solar tracking systems developed for the high accuracy in solar tracking. One of the key components of any motion control system is software. LabVIEW offers an ideal combination of flexibility, ease-of-use and well-integration with other I/O pieces for developing solar tracking system. Real-time solar positions which vary with GPS's data are used simultaneously to control the solar tracker by a chain of operating modes between the open and closed loops. This paper introduces a step by step procedure for the fabrication and performance assessment of a precision solar tracking system. The system developed in this study consists of motion controllers, motor drives, step-motors, feedback devices and application. CRD sensors are applied for the solar tracking system which play a primary role in poor conditions for tracking due to a gear backlash and a strong wind. Mini-dish was used as a concentrator for collecting sun light. The solar position data, in terms of azimuth and elevation, sunrise and sunset times was compared with those of KASI(Korea Astronomy & Space Science Institute). The results presented in this paper demonstrate the accuracy of the present system in solar tracking and utilization.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.1240-1243
• /
• 2008

제주도는 연평균 강우량이 1,975mm에 달하는 우리나라 최대의 다우지역이며 투수성이 좋은 다공질 화산암류 및 화산회토로 이루어져 있어 총 강우량의 48.5%에 이르는 빗물이 지하로 침투하여 대부분의 하천들은 건천을 이루고 있다. 제주도의 143개 하천 중 6개의 하천을 제외한 전 하천들은 건천의 형태를 이루고 있어 지표수의 발달이 매우 빈약하다. 본 연구에서는 장기 강우-유출 모형인 SWAT(Soil and Water Assessment Tool) 모형을 적용하여 제주도 주요하천의 유출량을 산정하고자 한다. 143개 하천 중 제주도 동부유역의 천미천과 북부유역의 외도천을 연구대상유역으로 선정하여 SWAT 모형을 적용하였다. 연구 대상유역에 대한 SWAT 모형의 입력자료인 수문 기상자료(Precipitation, Solar Radiation, Wind Speed, Climate, Humidity)와 지형자료(DEM(Digital Elevation Model), Land Use, Soil Type)를 구축하였으며, 동시에 모형의 보정 및 검증을 위하여 천미천 외도천 유역의 실측 유출자료를 수집하여 정리하였다. 모델의 입력자료를 구축하고 SWAT 모형을 이용하여 천미천 외도천 유역의 유출 모의를 하였고, 유출 모의 결과를 바탕으로 하여 수문관련 매개변수들의 민감도 분석을 하였으며, 민감도 분석을 통하여 보정을 수행하였다. 보정을 수행한 결과를 바탕으로 하여 천미천 외도천의 유출모의 결과를 분석하였으며, 향후 제주도에 필요한 연구결과 활용방안에 대하여 검토한 이상의 결과들로부터 제주도 하천에 대하여 SWAT모형을 적용한 결과 장기 일 유출량 모의에 대하여 전체적으로 우수한 결과를 보이고 있다. 향후 많은 보다 많은 유출량 자료를 확보하여 본 연구의 결과와 비교 검정하여 SWAT 모형을 구축한다면 제주도 하천의 장기 일 유출량 모의를 할 수 있을 것이라 판단된다.

• 한국수자원학회논문집
• /
• 제47권4호
• /
• pp.385-396
• /
• 2014

최근 빈번하게 발생하는 태풍사상은 극심한 홍수 및 바람 재해를 유발 시키고 있다. 이러한 점에서 본 연구에서는 1951년부터 2012년까지 한반도에 내습한 총 197개의 태풍사상을 대상으로 태풍의 발생위치 및 태풍의 궤적을 기준으로 태풍을 범주화 할 수 있는 확률론적 클러스터링 기법을 개발하였다. 모의실험을 통하여 개발된 모형의 적합성을 확인할 수 있었으며, 태풍 경로에 적용이 가능한 방안으로 평가되었다. 1951년부터 2012년까지 한반도 내습한 197개의 태풍사상을 대상으로 확률론적 클러스터링 기법을 적용한 결과 한반도를 내습한 태풍사상은 총 7개의 클러스터로 분류되었으며, 대부분 위도 $10^{\circ}{\sim}20^{\circ}N$, 경도 $120^{\circ}{\sim}150^{\circ}E$ 해수면에서 발생하여 한반도를 향하여 진행하는 것으로 나타났다. 클러스터 B의 경우 약 25.4%의 발생빈도를 가지며, 전선의 방향도 한반도를 직접 향하고 있어 상대적으로 한반도에 영향이 가장 큰 클러스터로 분석되었으며 한반도 전체에 걸쳐서 강한 양(positive)의 강우량 Anomaly를 갖는 것을 확인할 수 있었다.

• Structural Monitoring and Maintenance
• /
• 제2권1호
• /
• pp.35-48
• /
• 2015

The main objective of this study is to evaluate the long-term performance of various concrete composites in natural marine environment prevailing in the Gulf region. Durability assessment studies of such nature are usually carried out under aggressive environments that constitute seawater, chloride and sulfate laden soils and wind, and groundwater conditions. These studies are very vital for sustainable development of marine and off shore reinforced concrete structures of industrial design such as petroleum installations. First round of testing and evaluation, which is presented in this paper, were performed by standard tests under laboratory conditions. Laboratory results presented in this paper will be corroborated with test outcome of ongoing three years field exposure conditions. The field study will include different parameters of investigation for high performance concrete including corrosion inhibitors, type of reinforcement, natural and industrial pozzolanic additives, water to cement ratio, water type, cover thickness, curing conditions, and concrete coatings. Like the laboratory specimens, samples in the field will be monitored for corrosion induced deterioration signs and for any signs of failureover initial period ofthree years. In this paper, laboratory results pertaining to microsilica (SF), ground granulated blast furnace slag (GGBS), epoxy coated rebars and calcium nitrite corrosion inhibitor are very conclusive. Results affirmed that the supplementary cementing materials such as GGBS and SF significantly impacted and enhanced concrete resistivity to chloride ions penetration and hence decrease the corrosion activities on steel bars protected by such concretes. As for epoxy coated rebars applications under high chloride laden conditions, results showed great concern to integrity of the epoxy coating layer on the bar and its stability. On the other hand corrosion inhibiting admixtures such as calcium nitrite proved to be more effective when used in combination with the pozzolanic additives such as GGBS and microsilica.

• 한국해양공학회지
• /
• 제32권1호
• /
• pp.21-27
• /
• 2018

The design and analysis of a quayside mooring system for safe mooring of Prelude FLNG under extreme environmental conditions were carried out. The design of the mooring system considered the yard operation conditions and maximum wind speed during a typhoon. In order to secure the mooring safety of Prelude FLNG under an extreme environment, a special steel structure was designed between the quay and Prelude FLNG to maintain the distance from the quay to a certain extent to avoid a collision with the inclined base. The mooring safety was also ensured by installing additional new parts on the quay. A mooring analysis and mooring safety review were performed with more rigorous modeling considering the nonlinearity of the mooring rope and fender. In order to secure additional safety of the mooring system under extreme environmental conditions, a safety assessment was conducted on the failures of the mooring components proposed in the marine mooring guidelines. Based on the results of the mooring analysis, it was confirmed that the Prelude FLNG can be safely moored even under the extreme conditions of typhoons, and a worst case scenario analysis verified that the mooring system design was robust enough. The proposed mooring analysis and design method will provide a basis for the safe mooring of ultra-large floating offshore structures of similar size in the future.

• Spatial Information Research
• /
• 제17권2호
• /
• pp.243-249
• /
• 2009

최근 10년간 발생한 자연재해 중 태풍의 피해는 전체의 60%를 넘을 정도로 풍수해의 피해는 막대하며, 지속적 산업화와 개발로 인해 피해 규모 역시 매년 1조원 이상을 상회하고 있어, 자연재해에 대한 피해 경감 노력이 매우 요구되고 있다. 이를 위하여 최근 풍수해의 피해를 사전에 예측함으로써 예방 및 대비는 물론 재해 발생에 따른 응급 대응 및 복구의 효율성을 제고를 목적으로 과학적 방법론 개발 및 연구가 진행되고 있다. 태풍에 의한 피해 예측은 위험도 (Hazard)의 추정, 피해 대상 자료의 구축 (Inventory) 및 피해대상의 취약도 (Fragility)의 세 가지 요소를 이용하여 수행되는 것이 일반적이다. 위험도는 자연재해의 특성인 강우, 풍속 등을 물리적으로 모델링함으로써 추정할 수 있으며, 피해 대상 자료는 공공 및 사유 시설물을 총 망라함으로써 피해의 사회, 경제적인 피해 규모 예측에 활용된다. 각각의 피해 대상이 위험도에 따라 갖는 취약도는 최종 피해 및 손실 규모의 평가 자료로 이용된다. 이때 위험도의 추정 및 피해 대상자료의 구축을 위한 핵심적인 방법론으로서 지리정보시스템의 활용이 크게 요구된다. 따라서 본 연구에서는 태풍 피해 예측을 위한 자연재해 위험성 평가 방법론에 있어서 매우 중요한 요소인 고도 및 자연 지형, 지표의 특성 및 활용도, 피해 대상인 인공 시설물 등의 자료 항목을 분류하여 지리정보시스템을 활용한 태풍 위험 평가 방안을 제시하였다.