• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.14 no.1
• /
• pp.47-50
• /
• 2003

The transgender is who has persistent discomfort with his of her sex or sense of inappropriateness in the gender role of that sex. Many transgenders have been undergone trans-sex operations after 1980's. But there were not so much experience of voice surgery for transgenders. Vocal pitch can be elevated by various surgical techniques. Type IV thryoplasty, which one of the cricothyroid approximation methods, increases tension to the vocal folds, thus increasing fundamental frequency and upper pitch range. We treated a transgender (MTF, Male to female) using this technique. Acoustic and aerodynamic measures were obtained both pre- and post-operatively. Clinically significant improvement was achieved in both study; increasing of vocal pitch, widening of pitch range, and improvement of vocal efficiency.

• Transactions of the Society of Information Storage Systems
• /
• v.10 no.1
• /
• pp.23-26
• /
• 2014

In this paper, we present a novel approach for tuning the resonant frequency of torsionally driven vertical comb actuators. The tuning unit composed of thermal actuator, scissor mechanism and V-shape shaft enables continuous and reversible resonant frequency tuning. The proposed method is based on the stiffness alteration of the V-shape shaft. It is experimentally verified that the resonant frequency of the torsional microscanner is shifted up to 1.59 kHz from 1.51 kHz showing the maximum tuning ratio of 5.29%.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.5
• /
• pp.248-254
• /
• 2010

Porous $Al_2O_3$ film can be utilized as template for fabrication of nano-structured materials. Porous anodic alumina layer as template was prepared by anodization of aluminum in oxalic acid, and the pore diameter and barrier-type alumina layer can be controlled for proper anodizing parameter by widening process in $H_3PO_4$ solution. The $SiO_2$ nanodot and Ni nanowire was fabricated using anodic alumina template and their characteristics were investigated using SEM and TEM with EDS. Especially the growth mechanism of $SiO_2$ nanodot in alumina membrane compared with thinning of the alumina barrier layer during anodization was also investigated.

• Clinics in Shoulder and Elbow
• /
• v.19 no.3
• /
• pp.168-171
• /
• 2016

Fractures at the lateral end of the clavicle inevitably require surgical treatment as there is high potential for delayed union or nonunion. Acromioclavicular dislocation also requires stable and solid fixation for healing, and surgical treatment is recommended for the maintenance of joint function. The hook plate maintains the biomechanics of the acromioclavicular joint, enabling early range of motion. Therefore, for the past 10 years, the hook plate has been widely used in distal clavicle fractures and acromioclavicular joint injuries. However, the hook plate is associated with several complications, such as proximal clavicle fractures, widening of the hook hole, rotator cuff tear, subacromial impingement, and often acromial fractures. We report on two unusual cases of acromion fracture after hook plate fixation in patients with distal clavicle fracture and acromioclavicular dislocation alongside a literature review.

• The Journal of the Korean dental association
• /
• v.34 no.3 s.322
• /
• pp.215-222
• /
• 1996

Ridge expansion osteotomy(REO) procedure is used to widen the narrow ridge in locations that are too thin to permit the use of standard implant drills. The objective of this technique is to maintain, if possible, all of the existing maxillary bone by pushing the bone aside with minimal trauma. The author has used tis procedure on five patients who had narrow ridge in their soft maxillary bone. Fifteen implants were placed in sites needing ridge expansion using REO. The satisfactory results were obtained. The REO procedure is thought to be a safer and more conservative method of widening a narrow ridge. And this procedure is heatless, offers excellent tactile sensitivity, control, visibility, and takes advantage of available bone.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.679-686
• /
• 2015

This paper presents a design method for improving the low relative illumination and large distortion due to widening the field of a system. A tele-centric optical system in image space was suggested to increase the relative illumination. Through the analyses of the third-order aberrations affected by introducing aspherical surfaces, we have proposed a method to determine analytically what surface should be aspheric to correct each aberration effectively. By utilizing this method to design a wide field lens, a tele-centric wide field lens with f-number of F/2.0 was obtained. Even though the field angle is 120 degrees, it has a very low distortion less than -2% and high relative illumination more than 73.7%. In conclusion, this analytic method for selecting aspherical surfaces is expected to serve as a useful way to find design solutions.

• Transactions of Materials Processing
• /
• v.12 no.6
• /
• pp.521-528
• /
• 2003

Powder injection molding (PIM) uses the shaping advantage of injection molding but is applicable to metals and ceramics. This process combines a small quantity of polymer with an inorganic powder to form a feedstock that can be molded. After shaping, the polymeric binder is extracted and the powder is sintered, often to near-theoretical densities. According1y, PIM delivers structural materials in a shaping technology previously restricted to polymers. The process overcomes the shape limitations of traditional powder compaction, the costs of machining, the productivity limits of isostatic pressing and slip casting, and the defect and tolerance limitations of conventional casting. Since 1980s when major attention was given to PIM process, it has been widening the application area from small parts with complex shape and tailored properties to structural parts requiring strength and ductility as in automotive, military and medical industries.

• International Commerce and Information Review
• /
• v.6 no.2
• /
• pp.385-400
• /
• 2004

China has pegged its currency to the US dollar (at RMB 8.3 to the dollar) since 1994. The yuan's dollar peg has increased demand for chinese exports, which account for about a third of gross domestic product. The peg has also helped to attract $308 billion in foreign investment. But there has been criticism that China has over the past two years been engaging in protracted, large-scale intervention in one direction in exchange markets. According to many reports, RMB is undervalued by somewhere between 15 and 30% by manipulation. China may not want to float the currency at once, since doing so would have a dramatic and negative effect on the economy. However, there has so far been strong pressure from trading partners including the Unite States, Japan, EU. Considered all these things, China may eventually allow some changes in the Yuan's value. This may come in the form of widening a band of movement for the currency, rather than letting it float freely in the market.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.7 no.1
• /
• pp.39-42
• /
• 1977

Authors have obserbed a rare case of unilateral hypertrophy occured in the left mandibular condyle of 25 years old man. In the serial roentenograms, Authors have drawn following conclusions. 1. The patients face is markedly asymmetrical. This asymmetry consisted of an elongation and widening of the left mandibular ramus, neck and head of condyle which pushed the chin to the other side. 2. Left mandibular angle is flattened and mandibular inferior border is lower than right. 3. In the relationship of the left posterior teeth, severe mesioocclusion is occured.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.145-148
• /
• 2008

In recent years, LED's have been adopted for and ever widening range of applications and numerous examples of the replacement of incandescent and fluorescent light sources due to the dramatic improvements in the efficiency of white LED's can be found. Automotive lighting devices, as with other lighting equipment, should exhibit low power consumption, long lifetime and provide new design opportunities. In this paper, an overview of trends of technology and standardization of LED headlamp were investigated and performed various experiments using LED headlamp.