• Economic and Environmental Geology
• /
• v.30 no.4
• /
• pp.279-289
• /
• 1997

Dark to pale green-colored, Cr-bearing sericites from hydrothermal alteration zone of the Narim gold deposit were investigated mineralogically and geochemically. The alteration zone is composed mineralogically of quartz, carbonate minerals and green sericite with minor amounts of chlorite, barite and sulfide minerals (pyrite, sphalerite, galena). The zone is enriched in As (967 to 1520 ppm), Cu (31 to 289 ppm), Ni (1027 to 1205 ppm), Pb (0.20 to 1.24 wt.%) and Zn (1.03 to 1.07 wt. %) compared with fresh rocks such as granitic gneiss, porphyritic biotite granite and basic dyke. The Cr, probably the chromophore element, is highly enriched in the alteration zone (1140 to 1500 ppm), host granitic gneiss (1200 ppm) and porphyritic biotite granite (1200 ppm). Occurrence and grain size of sericite are diverse, but most of the Cr-bearing sericites (150 to $200{\mu}m$ long and 20 to $30{\mu}m$ wide) occur along the boundaries between ore veins and host rocks (especially basic dyke and granitic gneiss). X-ray diffraction data of the sericite show its monoclinic form with unit-cell parameters of $a=5.202{\AA}$, $b=8.994{\AA}$, $c=20.103{\AA}$, ${\beta}=95.746^{\circ}$ and $V=935.83{\AA}^3$, which are similar with the normal 2M1-type muscovite. Representative chemical formula of the sericite is ($K_{1.54}Ca_{0.03}Na_{0.01}$)($Al_{3.42}Mg_{0.38}Cr_{0.14}Fe_{0.06}V_{0.02}$)($Si_{6.69}Al_{1.31}$)$O_{20}(OH)_4$. The Cr content increases with decrease of the octahedral Al content, and ranges from 0.36 to 2.58 wt.%. DTA and TG curves of the sericite show endothermic peaks at $342^{\circ}$ to $510^{\circ}$, $716^{\circ}$ to $853^{\circ}$ and $1021^{\circ}C$, which are due to the expulsion of hydroxyl group. The total weight loss by heating is measured to be about 8.8 wt. %, especially at $730^{\circ}C$. Infrared absorption experiments of the sericite show broad absorption band due to the O-H bond stretching vibration near the $3625cm^{-1}$, coupled with the 825 and $750cm^{-1}$ doublet. The vibration bands related with the H-O-Al and Si-O-Al bonds occur at $1030cm^{-1}$ and 500 to $700cm^{-1}$, respectively. Based on paragonite content of the sericite, the formation temperature of the Narim gold deposit is calculated to be $220{\pm}10^{\circ}C$.

• Journal of Life Science
• /
• v.16 no.6
• /
• pp.1001-1005
• /
• 2006

The objective of this study was carried out to evaluate the suitability of simple sequence repeat (SSR) markers for genetic diversity assessment and identification of rice varieties. The 23 primers selected from 50 SSR primers showed polymorphisms in the 21 rice varieties. The 2 to 9 SSR alleles were detected for each locus with an average of 3.00 alleles per locus. The polymorphism information content (PIC) ranged form 0.091 to 0.839. Based on band patterns, UPGMA cluster analysis was conducted. These varieties were separate into 4 groups corresponding to rice ecotype and pedigree information and genetic distance of cluster ranging from 0.59 to 0.92. The 4 SSR primer sets (RM206, RM225, RM418, RM478) selected form 23 polymorphic primers were differentiated all the rice variety from each other by markers genotypes. These markers may be used wide range of practical application in variety identification of rice.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.311-318
• /
• 2002

A new bacteriocin producing lactic acid bacteria having antagonistic activity against Lactobacillus plantarum, was isolated from Kimchi. It was identified as Leuconostoc mesenteroides, and designated as Leuconostoc mesenteroides B7. The bacteriocin from Leuconostoc mesenteroides B7 named as bacteriocin B7 was stable in the pH range $2.5{\sim}9.5$. Bacteriocin B7 was active over a wide temperature range from $4^{\circ}C$ to $120^{\circ}C$. It was inactivated by proteinase K, trypsin, ${\alpha}-chymotrypsin$, and protease treatments indicating its proteinous nature. Tricine-SDS-PAGE of the purified bacteriocin B7 showed the presence of a single band, having a molecular mass of about 3,500 dalton. Mixed culture of the producer and the indicator, Lb. plantarum KFRI 464 or Lb. delbruekii KFRI 347, increased production of bacteriocin B7. This result suggested the presence of bacteriocin inducing factor in the indicator strain. The inducing factor was localized in cell debris and intracellular faction of the indicator cell, Lb. plantarum KFRI 464. Treatment of the inducing factor with proteinase K destroyed inducing activity. This result strongly suggested that the inducing factor is a protein.

• The Journal of Korean Medicine
• /
• v.18 no.1
• /
• pp.357-374
• /
• 1997

In order to investigate the effects of Sakunjatang(四君子湯) and Samultang(四物湯) aqua-acupuncture on immune response, Sprague-Dawley male rats were used and randomly divided into four group. Normal group was normal control, Control group was injected i.v. with 2mg/kg MTX on 9th and 11th day after sensitization with SRBC on 5th day, Sakunjatang aqua-acupunctured group(Sample A) was aqua-acupunctured daily for 18 days into the locus corresponding Bisu(B20) locus of the human body to Rat and MTX was administered 9th and 11th experimental day, Samultang aqua-acupunctured group(Sample B) was aqua-acupunctured daily for 18 days into the locus coresponding Bisu(B20) locus of the human body to Rat and MTX was administered 9th and 11th experimental day. In the 9th day and the 11th day after aqua-acupuncture, MTX was injected to reduce immune function in the tail of rat. leukocyte count, lymphocyte ratio, lymphocyte count of spleen, lymphocyte count of bonemarrow, contact hypersensitivity to DNFB, morphologic change of thymus cell, and electropherogram of serum protein. The result were summarized as follows: 1. Before MTX injection, leukocyte count had no significant difference in Sakunjatang aqua-acupunctured group and Samultang aqua-acupunctured group compared to control group and after MTX injection, leukocyte count had no significant difference Sakunjatang aqua-acupunctured group and Samultang aqua-acupunctured group. 2. Before MTX injection, lymphocyte ratio was decreased significantly Sakunjatang aqua-acupunctured group and Samultang aqua-acupunctured group compared to control group. 3. After MTX injection, lymphocyte ratio was increased significantly Sakunjatang aqua-acupunctured group, Samultang aqua-acupunctured group had no significant difference compared to control group. 4. The lymphocyte count of spleen was increased significantly Sakunjatang aqua-acupunctured group and Samultang aqua-acupunctured group compared to control group. 5. The lymphocyte count of bonemarrow was increased significantly Sakunjatang aqua-acupunctured group, Samultang aqua-acupunctured group had no significant difference compared to control group. 6. Contact hypersensitivity was no significant difference in Sakunjatang aqua-acupunctured group and Samultang aqua-acupunctured group compared to control group. 7. In the morphologic change of thymus cell, control group compared to normal group had a indistinct boundary between cortex and medulla, and lymphocyte cell density of thymus was low, Sakunjatang aqua-acupuryctured group had a distinct boundary between cortex and medulla, and lymphocyte cell density of thymus was high. 8. In the SDS-PAGE electrophorogram of serum protein, Sakunjatang aqua-acupunctured group and Samultang aqua-acupunctured group had a wide band of nearby 50,000 and 25,000 Dalton which meant IgG generate more activity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1027-1034
• /
• 2005

IEEE802.15.4a, which is started to realize the PHY layer including high precision ranging/positioning and low data rate communication functions, requires a simple and low power consumable transceiver architecture. To satisfy this requirements, the simple noncoherent on-off keying (OOK) UWB transceiver with the parallel energy window banks (PEWB) giving high precision signal processing interface is proposed. The flexibility of the proposed system in multipath fading channel environments is acquired with the pulse and bit repetition method. To analyze the bit error rate (BER) performance of this proposed system, a noise model in receiver is derived with commonly used random variable distribution, chi-square. BER of $10^{-5}$ under the line-of-sight (LOS) residential channel is achieved with the integration time of 32 ns and signal to noise ratio (SNR) of 15.3 dB. For the non-line-of-sight (NLOS) outdoor channel, the integration time of 72 ns and SNR of 16.2 dB are needed. The integrated energy to total received energy (IRR) for the best BER performance is about $86\%$.

• Geophysics and Geophysical Exploration
• /
• v.22 no.4
• /
• pp.177-185
• /
• 2019

Ground roll is a surface wave which is usually observed in the land seismic data. It is one of the typical coherent noise. During the reflection data processing, ground roll is removed because it is considered as noise. This removal process often causes the loss of reflection signals if the ground roll overlaps reflection signals. In this study, we look over Karhunen-Loeve Transform (KLT) and analyze its effects to suppress the ground roll appropriately while reducing the reflection loss. Numerical tests in homogeneous elastic media show that the ground roll has been properly rejected. However, the field data application reveals that there is no significant suppression of ground roll when compared to band-pass filtering. This can be considered that it is hard to calculate horizontally aligned gathers in the field data because the ground roll contains a wide range of frequency bands. On the contrary, the result of singular value decomposition (SVD) filtering shows that the ground roll has been significantly reduced. It is thought that the SVD filtering performs better in the ground roll suppression than KLT because it is easy to calculate the horizontally aligned gathers in the SVD filtering.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.5 s.347
• /
• pp.54-63
• /
• 2006

This work proposes a 14b 100MS/s 0.18um CMOS ADC with optimized resolution, conversion speed, die area, and power dissipation to obtain the performance required in the fourth-generation mobile communication systems. The 3-stage pipeline ADC, whose optimized architecture is analyzed and verified with behavioral model simulations, employs a wide-band low-noise SHA to achieve a 14b level ENOB at the Nyquist input frequency, 3-D fully symmetric layout techniques to minimize capacitor mismatch in two MDACs, and a back-end 6b flash ADC based on open-loop offset sampling and interpolation to obtain 6b accuracy and small chip area at 100MS/s. The prototype ADC implemented in a 0.18um CMOS process shows the measured DNL and INL of maximum 1.03LSB and 5.47LSB, respectively. The ADC demonstrates a maximum SNDR and SFDR of 59dB and 72dB, respectively, and a power consumption of 145mW at 100MS/s and 1.8V. The occupied active die area is $3.4mm^2$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.60-69
• /
• 2000

This paper describes a single-chip full-custom implementation of pipelined adaptive decision-feedback equalizer(PADFE) using a 0.25-${\mu}m$ CMOS technology for wide-band wireless digital communication systems. To enhance the throughput rate of ADFE, two pipeline stages are inserted into the critical path of the ADFE by using delayed least-mean-square(DLMS) algorithm. Redundant binary (RB) arithmetic is applied to all the data processing of the PADFE including filter taps and coefficient update blocks. When compared with conventional methods based on two's complement arithmetic, the proposed approach reduces arithmetic complexity, as well as results in a very simple complex-valued filter structure, thus suitable for VLSI implementation. The design parameters including pipeline stage, filter tap, coefficient and internal bit-width, and equalization performance such as bit error rate (BER) and convergence speed are analyzed by algorithm-level simulation using COSSAP. The single-chip PADFE contains about 205,000 transistors on an area of about $1.96\times1.35-mm^2$. Simulation results show that it can safely operate with 200-MHz clock frequency at 2.5-V supply, and its estimated power dissipation is about 890-mW. Test results show that the fabricated chip works functionally well.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.36.2-36.2
• /
• 2013

The SPICA (SPace Infrared Telescope for Cosmology & Astrophysics) project is a next-generation infrared space telescope optimized for mid- and far-infrared observation with a cryogenically cooled 3m-class telescope. The focal plane instruments onboard SPICA will enable us to resolve many astronomical key issues from the formation and evolution of galaxies to the planetary formation. The FPC-S (Focal Plane Camera - Sciecne) is a near-infrared instrument proposed by Korea as an international collaboration. Owing to the capability of both low-resolution imaging spectroscopy and wide-band imaging with a field of view of $5^{\prime}{\times}5^{\prime}$, it has large throughput as well as high sensitivity for diffuse light compared with JWST. In order to strengthen advantages of the FPC-S, we propose the studies of probing population III stars by the measurement of cosmic near-infrared background radiation and the star formation history at high redshift by the discoveries of active star-forming galaxies. In addition to the major scientific targets, to survey large area opens a new parameter space to investigate the deep Universe. The good survey capability in the parallel imaging mode allows us to study the rare, bright objects such as quasars, bright star-forming galaxies in the early Universe as a way to understand the formation of the first objects in the Universe, and ultra-cool brown dwarfs. Observations in the warm mission will give us a unique chance to detect high-z supernovae, ices in young stellar objects (YSOs) even with low mass, the $3.3{\mu}$ feature of shocked circumstance in supernova remnants. Here, we report the current status of SPICA/FPC project and its extragalactic sciences.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.12
• /
• pp.1059-1068
• /
• 2016

This paper proposes slow wave structure(SWS) utilized to increase antenna gain of printed dipole antenna(PDA) and to suppress sidelobe level simultaneously, and makes sure of electrical characteristics of the antenna according to parameter variations of components of the slow wave structure. The printed slow wave structure which is composed of a dielectric substrate and a metal rods array is located on excited direction of the PDA, affecting the radiation pattern and its intensity. Parasitic elements of the metal rods are arrayed in narrow consistent gap and have a tendency to gradually decrease in length. In this paper, array interval, element length, and taper angle are selected as the parameter of the parasitic element that effects radiation characteristics. Magnitude and phase distribution of the electrical field are observed and analyzed for each parameter variations. On the basis of these results, while the radiation pattern is analyzed, array methods of parasitic elements of the SWS for high gain characteristics are provided. The proposed antenna is designed to be operated at the Wifi band(5.15~5.85 GHz), and parameters of the parasitic element are optimized to maximize antenna gain and suppress sidelobe. Simulated and measured results of the fabricated antenna show that it has wide bandwidth, high efficiency, high gain, and low sidelobe level.