• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 특별세미나 특별세션
• /
• pp.239-252
• /
• 2006

The existing track structure for urban Maglev system is designed for the Maglev vehicles of HSST in Japan and UTM in Korea. The tracks hvaing cross beams for supporting rails are located on bridge girders and have several draw backs. Linimo in Nagoya, Japan, the first commercial urban Maglev line, has separated tracks from a bridge to overcome the previous track structure. However, the Linimo just put the existing track on bridge deck. This study suggests a improved track structure for urban Maglev system and compares the behavior of the new and existing track through static structural analyses. In the improved track, the power collector of a Maglew vehicle is installed parallel to the bridge deck surface, and, thus, the bottom width of the track structure is not limited by the vehicle's width. Therefore, the live load is distributed more effectively by the wide bottom of the track. Also, steel plates instead of steel cross beams are used to support rails, and, thus, the rail's deflection is improved.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.105-110
• /
• 2007

The differential equations governing free, in-plane vibrations of circular curved beams with elastic springs at beth ends, including the effects of axial deformation, rotatory inertia and shear defamation. are solved numerically using the corresponding boundary conditions. The lowest three natural frequencies are calculated over a wide range of non-dimensional system parameters, the radial, tangential and rotational spring parameters, the subtended angle, the slenderness ratio and the shear parameter.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.989-994
• /
• 2000

Nine tests to failure are performed on full-scale eight composite beams with unreinforced web opening having ribbed slabs with formed deck which are perpendicular to the steel section and one steel beam. The effects of slab width, reinforcing of stud, moving of rib, moment-shear ratio are studied. At the low M/V ratio, Vierendeel action around the high moment end of the opening is occurred and the large deflection across the opening and transverse cracking are occurred with increasing of applied load. As the M/V ratio increases, the relative deflection across the opening decreases. And at failure, full tensile strain are occurred at bottom T section of steel beam, and concrete crushes at the High Moment End of the opening. With narrow slabs, diagonal tension failure at the high moment end of the opening is occurred. And with wide slabs, rib punch-through failure is occurred near the high moment end of the opening. The implications for design are discussed.

• Structural Engineering and Mechanics
• /
• 제41권3호
• /
• pp.421-440
• /
• 2012

In this analytical study numerous prior experimental studies on reinforced concrete beam-to-column connections subjected to cyclic loading are investigated and a database of geometric properties, material strengths, configuration details and test results of subassemblies is established. Considering previous experimental research and employing statistical correlation method, parameters affecting joint shear capacity are determined. Afterwards, an equation to predict the joint shear strength is formed based on the most influential parameters. The developed equation includes parameters that take into account the effect of eccentricity, column axial load, wide beams and transverse beams on the seismic behavior of the beam-to-column connections, besides the key parameters such as concrete compressive strength, reinforcement yield strength, effective joint width and joint transverse reinforcement ratio.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권4호
• /
• pp.159-169
• /
• 2003

춤이 깊은 보 설계를 위한 현행 ACI 기준은 콘크리트 압축강도 40MPa이하의 실험결과를 바탕으로 한 반 경험적인 제안식으로서 40MPa이상 고강도콘크리트의 사용이 증가됨에 따라 현행 기준의 고강도 깊은 보에 대한 적용성 평가가 요구되고 있다. 고강도 깊은 보의 전단강도 예측을 위하여 본 연구에서는 콘크리트강도와 모멘트효과를 고려한 수정 연화 스트럿-타이 모델을 제시하였다. 제안모델 평가를 위하여 4개의 시험체를 제작하였으며, 콘크리트 압축강도 49~78MPa로 제작된 74개의 기존 실험 데이터를 적용하여 ACI 318-99 11.8기준, ACI 318-02 부록 A STM의 해석결과와 비교 평가하였다.

• 한국지반공학회논문집
• /
• 제15권4호
• /
• pp.207-220
• /
• 1999

성토지지말뚝으로 지지된 연약지반상 성토지반의 파괴형태를 조사하기 위하여 실내모형실험이 실시되었다. 성토지지말뚝은 성토하중의 지지효과를 증대시키기 위하여 줄말뚝의 형태로 설치하였으며 줄말뚝의 두부는 지중보 형태의 말뚝캡보로 서로 연결시켰다. 이 말뚝캡보는 성토지반의 장축방향에 직각이 되도록 연결시켰다. 사용모래로는 주문진 표준사를 사용하였으며 성토지반의 변형거동을 관찰하기 위하여 흑연가루로 채색한 모래층과 원래의 모래층을 서로 3mm두께로 번갈아 성토하여 줄무늬를 만들었다. 실험중 촬영한 사진분석으로 부터 성토지반의 파괴형태는 지반아칭파괴와 펀칭전단파괴의 두가지임을 알 수 있다. 성토지반내 어떤 파괴형태가 발생될 것인가는 성토고와 말뚝캡보 사이의 간격에 의존함을 알 수 있다. 즉 성토고가 말뚝캡보사이 간격에 비하여 충분히 높으면 지반아칭파괴가 발생되며 그 반대의 경우는 펀칭전단파괴가 발생된다. 지반아칭파괴는 말뚝캡보 폭과 같은 두께를 가지는 반원통형 아치형태로 성토지반내에 발생한다. 그리고, 말뚝캡보 위에는 쐐기영역이 발생하며 이 쐐기영역은 지반아칭파괴나 펀칭전단파괴가 발달하는 동안에도 변형되지 않은 상태로 남아있다. 펀칭전단파괴시 변형토괴의 경계형상도 실험중 촬영한 사진분석에 근거하여 밝혀질 수 있다.

• Structural Engineering and Mechanics
• /
• 제70권1호
• /
• pp.67-80
• /
• 2019

Strengthening with near surface mounted carbon fibre reinforced polymers (NSM-CFRP) is a strengthening technique that have been used for several decades to increase the load carrying capacity of reinforced concrete members. In Iraq, many concrete buildings and bridges were subjected to a wide range of damage as a result of the last war and many other events. Accordingly, there is a progressive increase in the strengthening of concrete structures, bridges in particular, by using CFRP strengthening techniques. Near-surface mounted carbon fibre polymer has been recently proved as a powerful strengthening technique in which the CFRP strips are sufficiently protected against external environmental conditions especially the high-temperature rates in Iraq. However, this technique has not been examined yet under repeated loading conditions such as traffic loads on bridge girders. The main objective of this research was to investigate the effectiveness of NSM-CFRP strips in reinforced concrete beams under repeated loads. Different parameters such as the number of strips, groove size, and two types of bonding materials (epoxy resin and cement-based adhesive) were considered. Fifteen NSM-CFRP strengthened beams were tested under concentrated monotonic and repeated loadings. Three beams were non-strengthened as reference specimens while the remaining were strengthened with NSM-CFRP strips and divided into three groups. Each group comprises two beams tested under monotonic loads and used as control for those tested under repeated loads in the same group. The experimental results are discussed in terms of load-deflection behavior up to failure, ductility factor, cumulative energy absorption, number of cycles to failure, and the mode of failure. The test results proved that strengthening with NSM-CFRP strips increased both the flexural strength and stiffness of the tested beams. An increase in load carrying capacity was obtained in a range of (1.47 to 4.49) times that for the non-strengthened specimens. Also, the increase in total area of CFRPs showed a slight increase in flexural capacity of (1.02) times the value of the control strengthened one tested under repeated loading. Increasing the total area of CFRP strips resulted in a reduction in ductility factor reached to (0.71) while the cumulative energy absorption increased by (1.22) times the values of the strengthened reference specimens tested under repeated loading. Moreover, the replacement of epoxy resin with cement-based adhesive as a bonding material exhibited higher ductility than specimen with epoxy resin tested under monotonic and repeated loading.

• 한국음향학회지
• /
• 제18권1호
• /
• pp.25-31
• /
• 1999

본 연구에서는 음향측정 목적의 선형배열에 가우시안 가중치를 적용시킨 광대역 단일 빔형성 알고리듬을 제안한다. 제안 알고리듬은 배열 내의 모든 센서를 동시에 사용하여 1회에 광대역 수신 빔을 형성시킨다. 여기서 주파수 종속 함수의 가우시안 가중치는 각 센서의 수신 주파수 범위를 제어하도록 시간지연 보상 전에 적용된다. 시뮬레이션 결과, 제안 알고리듬에 의해 형성된 광대역 단일빔의 지향지수 및 빔패턴 특성이 광대역 음향신호 측정에 가용함을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2045-2047
• /
• 1998

To store and maintain electron beams in synchrotron machines, it is very important to read and keep precise magnet current ($<{\pm}50$ ppm). However, accurate DC current measurement tools are not readily available. In this paper, we introduce high precision, wide band zero-flux current transformer that is manufactured and tested at Pohang Accelerator Laboratory. This sensor can measure DC as well as AC current. Accuracy of the current transformer is less than ${\pm}$20 ppm. Performance of the manufactured current sensor is compared with a high precision DCCT which is commercially available sensor.

• KIEAE Journal
• /
• 제7권6호
• /
• pp.107-112
• /
• 2007

Recently hybrid beam system is widely used because it has many structural advantages such as short construction period and low story height etc. Generally steel wide flange beam exposure type and embedded type hybrid beams are constructed. Even though exposure hybrid beam is easily constructed, the fire proofing protection process is necessary because steel wide flange beam cannot resist to fire itself. Story height reduction type hybrid beam, which is introduced hybrid beam in this paper, does not need fire proofing protection process because it is constructed as a fully embedded type hybrid beam. Developed construction process and actual construction cases of story height reduction type hybrid beam were introduced in this study.