• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.751-755
• /
• 2003

In this paper, We proposed compact multi-layer LTCC (Low Temperature Cofired Ceramic) bandpass filter for Bluetooth module. A ${\lambda}/4$ coupled stripline resonators are designed, which composed of coupled strip-line section and loading capacitance. This resonator with a loading capacitor has slow-wave characteristics. Due to the slow-wave effect of the proposed resonator, it is possible to design and fabricate a compact bandpass filter with a wide upper stop band. Attenuation poles in the lower stop band are achieved using controlling of electro-magnetic coupling between resonators. Using multi-layer LTCC technology, we designed and fabricated band pass filter with a finite attenuation pole and wide upper stopband. The overall size of the filter is $1.2{\times}2.0{\times}1.0mm^3$.

• 한국전자파학회논문지
• /
• 제27권5호
• /
• pp.424-429
• /
• 2016

본 논문은 인공전송선로 중 하나인 LUC(Low-pass filter Unit Cell)을 이용한 이중모드 링-공진기 대역통과 여파기를 제안한다. 기존의 링 공진기 대역통과 여파기는 한 파장 링 공진기를 기반으로 설계하므로 소형화에 어려움이 있고, 정수배 파장의 고조파로 인한 원치 않는 동작의 문제점이 있다. 저역통과 특성을 지닌 인공전송선로 중 하나인 LUC를 이용하여 링-공진기를 구성함으로써 소형화와 고조파 저지 특성을 구현하였다. 링-공진기와 입력 및 출력 단의 인터디지탈 결합선로 인버터를 이용하여 2단 대역통과 여파기를 설계 및 제작하였다. 제작된 여파기는 이중모드, UWB 전 대역저지, 날카로운 스커트 특성을 나타냈으며, 기존의 링-공진기 대역통과 여파기의 링 면적을 약 60 % 감소시켰다.

• ETRI Journal
• /
• 제43권1호
• /
• pp.133-140
• /
• 2021

Herein, we present a compact transversal bandpass filter (BPF) with an extremely wide upper stopband and multiple transmission zeros (TZ). Three signal transmission paths with shorted stubs and open-coupled lines allow signal transmission from input port to output port. Two resonant modes can be excited simultaneously and managed easily for bandpass response. Eleven TZs are achieved via transmission path cancelation; an extremely wide upper stopband with an attenuation level better than -12 dB is achieved up to 11.7 f0, where f0 is the center frequency (CF). In addition, bandwidth and CF can be controlled by adjusting electrical lengths. For proof of concept, a wideband BPF centered at 1.04 GHz with 3 dB fractional bandwidths of 49.2% was designed, fabricated, and evaluated. The overall circuit measures 0.045λg × 0.117λg; good agreement was observed between the measured and simulated results.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.215-218
• /
• 2009

In this paper, Dual-band bandpass filter studied design using Parallel Coupled SIR(Stepped Impedance Resonator). This Dual-band bandpass filter design SIR of half-wavelength by Parallel-coupled type that is available to RFID system and Changed structure in Meander form by size reduce. Because seen Dual-band bandpass filter is designed so that is applicable for frequency 433MHz and 2.45GHz of RFID system is very wide distance between two pass-band, establish 433MHz by fundamental frequency and controlled 2.45GHz by 2st spurious resonance frequency bandstop filter of 1st spurious resonance frequency and Parallel coupled SIR Combine to remove 1st spurious resonance frequency.

• 대한전자공학회논문지TC
• /
• 제49권1호
• /
• pp.73-77
• /
• 2012

본 논문에서는 차세대 초전도 핵융합 연구장치의 상태 진단 및 점검을 위한 마이크로파 진단 시스템에 적용하기 위한 광대역 대역 통과 여파기를 설계하였다. 광대역 특성 및 낮은 손실과 높은 스컷 특성을 위해 메타 전자파 구조를 적용하였다. 제안된 광대역 대역 통과 여파기는 한국형 핵융합 원자로의 마이크로파 진단 시스템 내에서 전압제어 발진기의 출력 단에 적용되어 전압제어 발진기에서 발생되는 고조파 성분들을 제거하여 시스템의 선형성을 개선하는 역학을 한다. 광대역 대역 통과 여파기는 18-28 GHz의 대역을 통과 시키고 그 외 대역에서 .20 dB 이하의 저지 특성을 갖도록 설계하였다. 메타 전자파 구조 특성 확인을 위해 위상의 분산도를 확인하였으며 통과 대역의 하측 대역에서 LH 특성을 갖으며 그 외 대역에서는 RH 특성을 보이도록 설계하였다. 제안된 광대역 대역 통과 여파기의 군지연 (Group Delay)의 경우 0.5 nS 이하로 매우 우수한 특성을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2389-2391
• /
• 2005

In this paper, a compact S type resonator is presented, where the proposed resonator is surface micromachined over transmission lines or other resonators, in order to obtain a wide range of possible electromagnetic couplings. The structure has been applied in two compact, bandstop and bandpass filters with moderate fractional bandwidths (FBW) of 20% and 25% respectively. The bandstop filter presented, was designed by the combination of two design methods in order to obtain the proposed fractional bandwidth, where traditionally, coupled resonator bandstop filters have been used for narrow stopbands. The bandpass filter illustrates the use of the proposed suspended resonator structure to obtain a wide range of electric type coupling coefficients, and external quality factors for the filter. This paper describes the design methodology, concepts and fabrication method proposed for the design of these filters.

• Current Optics and Photonics
• /
• 제3권6호
• /
• pp.590-596
• /
• 2019

To improve the color gamut of a liquid-crystal display (LCD), we propose a bandpass filter that is added to the backlight unit to optimize the backlight spectrum. The bandpass filter can only transmit red, green and blue light in the visible range, while reflecting the unwanted light. We study the optical properties of the bandpass filter using the transfer-matrix method, and the effect of the bandpass filter on the color gamuts of LCDs is also investigated. When a bandpass filter based on a 5-layer configuration comprising low and high refractive indices ((HL)²H) is used in phosphor-converted white-light-emitting diode (pc-WLED), K₂SiF₆:Mn⁴⁺ (KSF-LED), and quantum-dot (QD) backlights, the color gamuts of the LCDs improve from 72% to 95.3% of NTSC, from 92% to 106.7% of NTSC, and from 104.3% to 112.2% of NTSC respectively. When the incident angle of light increases to 30°, the color gamuts of LCDs with pc-WLED and KSF-LED backlights decrease by 2.9% and 1% respectively. For the QD backlight, the color gamut almost does not change. When the (HL)²H structure is coated on the diffusion film, the color gamut can be improved to 92.6% of NTSC (pc-WLED), 105.6% of NTSC (KSF-LED), and 111.9% of NTSC (QD). The diffusion film has no obvious effect on the color gamut. The results have an important potential application in wide-color-gamut LCDs.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권1호
• /
• pp.65-72
• /
• 2011

In this paper, the T-shape stepped impedance resonators are adopted for the design of microstrip bandpass filters for wide harmonics suppression. The proposed filters are operated at the center frequency of 2.44 GHz and 5.20 GHz, respectively. These bandpass filters have been also applied for a high performance diplexer. The insertion losses at the center frequencies of 2.44 and 5.20 GHz are 1.23 and 1.18, respectively. The applicable return losses for both frequency bands and a wide stopband better than 17 dB up to 20 GHz have been obtained.

• 한국전자파학회논문지
• /
• 제19권2호
• /
• pp.95-101
• /
• 2008

본 논문은, '불균형 조건의 메타 재질 구조'를 이용하여 GSM 대역에서 불요파 억제와 효과적인 소형화를 얻는 새로운 대역 통과 여파기 설계 기법을 제시한다. 기존의 반파장 및 025배 파장 공진기 기반의 여파기들과 비교하여, 본 CRLH 여파기는 처음으로 제안되는 유도성 결합 inverter에 의해 0차 공진기들이 결합되고, 이것을 사용함으로써 40$\sim$50 dB 하모닉 억제 효과와 80 %율의 소형화 얻는데 위한 우수한 성능을 보여준다. 이 기법의 타당성이 등가 회로와 분산도의 도출과 함께 성능 예측과 실험을 통해 검증된다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.265-268
• /
• 2003

In this paper, we introduce the SIR typed bandpass filters in CPW structures for shifting spurious harmonic frequency into higher frequency band. And we proposed the effective feed structures for suppressing spurious frequency in the SIR typed CPW bandpass filters. The designed folded feed structures have lowpass filtering characteristic. They are very effective feed types in the CPW bandpass filters for suppressing harmonics. The measured results of the CPW bandpass filter with folded feed line shows that it has suppressed and wide out-of-band up to 5.8fo.