• 펄프종이기술
• /
• 제41권5호
• /
• pp.44-49
• /
• 2009

Old newspaper was deinked using commercial cellulolytic enzymes and a surfactant complex at low alkalinity. The properties of the deinked pulp(DIP) were evaluated and the suspended solids content, cationic demand, turbidity, and chemical oxygen demand(COD) of the process water were measured. The results can summarized as follows, 1. The brightness and yield of the DIP were improved using enzymatic surfactant complex deinking. 2. The amount of foaming during deinking with the enzyme surfactant complex was higher than that with synthetic surfactant deinking. However, it was not sufficient to cause process problem. 3. The pH and turbidity of the white water from deinking with the enzyme surfactant complex were similar to those of the white water from surfactant deinking. 4. The suspended solids content, cationic demand, and COD of the white water from deinking with the enzyme surfactant complex were improved compared to those of the white water from surfactant deinking.

• 펄프종이기술
• /
• 제37권4호통권112호
• /
• pp.38-43
• /
• 2005

Natural Com Starch(NCS) spray system has been widely used In multiply board mill for the better bonding strength between board layers. However the unsuitable NCS spray system could lead to a drop in plybond efficiency of multiply board. It could also result in the accumulation of unretained-starch in the white water system, which could not only rise in BOD and COD level but also reduce the effects of rosin-alum sizing system and other additives. In this study, the simple and rapid method by UV-spectroscopy for measuring the starch contents in the white water was proposed, and the quantitative analysis for dissolved starch content in white water was carried out in two kinds of board production process. It could be confirmed that about 150 ppm of oxidized starch was retained in white water dewatered from undertop ply of multiply board process, and about 470 ppm of natural starch was dissolved in white water originated from unsuitable spraying system in the multiply board production lines for cup base paper.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.15-24
• /
• 1999

A new technique for recycling of white water was developed in order to reduce the calcium hardness in a closed OCC recycling system. Calcium ions present in the white water were precipitated as calcium carbonate by reacting with sodium carbonate, and the precipitated $CaCO_3$ was removed from the system using a flotation fractionation method, which has been commonly used in deinking process. In the flotation stage, a mixed gas of $CO_2$-air was purged into the flotation cell because the pH of $Na_2CO_3$-treated white water was reduced to neutral by $CO_2$ gas. Since $CaCO_3$ precipitate tends to stick onto fine fiber surface and then selectively removed from the white water, a proper amount of suspended solid in white water acts as an important factor for deciding the removal efficiency. By the application of $Na_2CO_3$ addition-$CO_2$ flotation to the short circulated white water, the calcium hardness was significantly reduced by 87% and more. Removal of calcium ions with fine fibers led to a drainage improvement, reduction of fresh water consumption, and enhanced efficiency of wet-end chemicals.

• 펄프종이기술
• /
• 제38권2호
• /
• pp.9-15
• /
• 2006

Neutral sizing is required for linerboard to solve the troubles in strength and process caused by recycled raw materials. AKD sizing efficiency can be influenced by process condition like white water quality, fines retention and so on. Therefore, this study was aimed to evaluate sizing performance of general and fast cure type AKDs using process water obtained from linerboard mill. To evaluate effect of process water quality on AKD sizing, white water was diluted with tap water at the different dilution ratios and UKP slurry was sized using the prepared water. Also, effects of inorganic and organic ion material on sizing were examined. When white water was used for stock forming, UKP sheet showed very low sizing degree. Sizing degree of sheet was increased with increase of dilution ratio because water quality was improved. Especially anionic organic material had a greater influence on AKD sizing than inorganic material. When white water quality was deteriorated, fast cure type AKD showed superior sizing performance to general type AKD.

• 동아시아식생활학회지
• /
• 제14권1호
• /
• pp.47-53
• /
• 2004

$\pi$-water는 일반적인 물과는 달리 뛰어난 침투성으로 인해 많은 기능성을 발휘하는 것으로 주목 받고 있다. $\pi$-water를 첨가하여 취반시 나타나는 노화속도의 지연 및 보존기간의 증가 등은 제빵 제품에서도 기대할 수 있으며 보다 신선한 상태로 보존 및 판매도 가능할 것이다. 따라서 $\pi$-water를 빵 제품에 사용하여 반죽의 변화와 발효 그리고 보존성을 측정 분석함으로서, $\pi$-water의 사용을 위한 기초 자료를 제공하고자 하였다. 실험은 $\pi$-water의 함량을 0.0%, 0.1%, 0.5%, 1.0%, 1.5% 비율로 높여가며 제빵시험, 색도측정, 제빵적성평가, 조직감 특성, 관능평가를 하여 제품의 품질과 상품성을 평가하였다. 제빵시험에서는 $\pi$-water를 많이 첨가한 반죽일수록 발효속도와 발효량이 컸으며 반죽의 끈적거리는 촉감을 느낄 수 있었다. 하지만 그 격차가 심하게 나타나지는 않았다. 제빵적성은 빵의 용적 비용적(specific volume)으로 평가하였는데 전체적으로 $\pi$-water의 함량이 높을수록 높이가 높고 가벼운 조직의 제품이 만들어졌다. 조직감 특성과 관능 평가는 식빵의 보존성을 평가하기 위하여 제조 3일 후 측정하였는데 0.1%의 $\pi$-water를 함유하고 있는 제품의 조직감이 가장 뛰어난 것으로 나타났고 전체적으로 함유량이 높을수록 좋은 조직감을 나타내었다. 하지만 관능평가에서는 0.1%를 함유한 제품을 제외한 나머지는 0.0% 함유하고 있는 제품보다 좋지 않은 것으로 나타났다. 전체적으로 $\pi$-water의 함량이 높을수록 조직이 부드럽고 씹힘성, 부피감이 좋아지는 등 0.1%정도의 $\pi$-water를 첨가하여 제조한 제품이 우월한 특성을 보였으며 관능평가 등을 고려할 때 0.1% 정도의 $\pi$-water 함유량이 가장 적합한 것으로 보이며 제품에 긍정적인 영향을 미치는 것으로 판단된다.

• KSBB Journal
• /
• 제22권2호
• /
• pp.119-122
• /
• 2007

RP-HPLC에서 주요 변수인 이동상의 조성과 컬럼의 종류를 변화시켜 난백 단백질을 실험하였다. C4, C8 C18 컬럼을 비교 실험하여 C18 컬럼에서 가장 많은 피크를 보여 C18 컬럼을 선택하였다. 등용매 용리에서 ACN : water의 조성이 50 : 50에서 가장 많은 피크를 보여 이 결과를 토대로 기울기 용리를 하여 실험하였다. 기울기 용리에서 얻어진 4가지 피크를 확인하기 위하여 단일성분인 lysozyme와 ovalbumin의 체류시간을 측정하여 확인하였고 논문을 통해 2가지 피크를 예측할 수 있었다.

• 한국식품영양과학회지
• /
• 제30권4호
• /
• pp.574-578
• /
• 2001

담수어인 향어와 해수어인 방어의 white muscle과 red muscle로 부터 근원섬유단백질을 조제하여 생육 환경조건이 다른 어류의 근원섬유단백질간에는 어떠한 차이가 있는지에 대하여 알고자 myofibrillar protein ATPase 활성에 대한 온도의 존성과 열안정성을 실험하였다. 향어와 방어 근원섬유단백질의 기질친화도와 $V_{max}$ 값에 있어서는 향어가 방어에 비해 높은 값을 보였고, 활성에 대한 반응온도 및 반응시간에 따른 영향에 있어서는 myofibril의 경우 red muscle이 white muscle에 비해 낮은 활성을 나타냈으며, actomyosin의 경우에 있어서는 향어가 4$0^{\circ}C$에서도 활성증가를 나타낸 반면에 방어는 45$^{\circ}C$, 5$0^{\circ}C$와 같이 반응시간에 따른 활성증가를 나타내지 않았다. 그리고 일반적으로 향어가 방어보다 그리고 white muscle이 red muscle에 비해 높은 반응생성물을 나타내었다. 열안정성에 대한 열역학량(D value, Z value, )은 muscle 종류간 그리고 환경이 다른 어종간에 차이를 보였다. 향어와 방어 둘다 white muscle이 red muscle에 비해 안정하였으며, 향어 myofibrillar protein이 방어 myofibrillar protein보다 열에 안정한 값을 보여 환경조건이 열안정성에 차이를 줄 수 있는 것으로 나타났다.

• 한국식품영양과학회지
• /
• 제28권2호
• /
• pp.292-298
• /
• 1999

Myofibril and actomyosin were prepared from red muscle and white muscle of fresh water fish and sea water fish, and their biochemical characteristics and SDS PAGE patterns of myofibril were compared. SDS PAGE analysis showed that electrophoretic patterns of myofibril were similar be tween white muscle and red muscle, while difference of 30kDa component of myofibril was detected between fresh water fish and sea water fish. When myofibril were treated with trypsin, difference in hydrolysis of heavy chain was observed between white muscle and red muscle. In activities of Ca ATPase, Mg ATPase, EDTA ATPase and ATPase activity pH curve, myofibrillar protein from fresh water fish showed higher specific activity than those from sea water fish.

• 펄프종이기술
• /
• 제38권2호
• /
• pp.1-8
• /
• 2006

In this study a process simulation method was used to analyze the accumulation phenomena of anionic starch in the process white water as the closure level of a fine paper making process is increased. A pilot paper machine was used as a model process. Dynamic simulations of the influence of white water usage ratio and uncoated broke addition ratio on the variation of process variable was monitored as a function of time. Results from the dynamic simulations showed that the volume of reservoirs affected the dynamic behavior of the process. The dynamic behavior of flow rate and dissolved starch concentration in process units were different from each other. The speed of the change of dissolved starch concentration in process units was depend on the starting point of the change of dissolved starch concentration, the length of circulation loop, and the volume of reservoirs.

• 펄프종이기술
• /
• 제36권1호
• /
• pp.9-15
• /
• 2004

Micro inorganic solids and dissolved materials contained in the white water of linerboard process was obtained by centrifugation, and their characteristics were analyzed along with their effects on the mechanical properties of linerboard. Micro inorganic materials had little influence on tensile index and ZDT of UKP sheets. They showed rather a positive effect on mechanical properties of KOCC sheets due to adsorbed polymer. Mechanical properties of KOCC sheets decreased remarkably when the concentration of dissolved materials increased especially above 4000 ppm.