• 한국식품과학회지
• /
• 제31권6호
• /
• pp.1604-1612
• /
• 1999

손바닥 선인장의 열매와 줄기를 밀가루에 3, 6 및 9% 첨가하여 제조한 생면의 품질특성과 총균수의 변화를 조사하였다. 선인장 열매와 줄기의 첨가농도가 증가함에 따라 아밀로그래프상의 호화개시온도와 최종점도는 감소하였고, 최고점도는 증가하였다. 생면의 조리후 중량과 부피는 선인장 열매와 줄기를 첨가함에 따라 감소하였고, 조리손실은 증가하였다 조리면의 관능검사 결과, 선인장 열매는 6%, 줄기는 3% 첨가시에 가장 좋은 품질로 평가되었다. 생면의 저장기간동안 총균수는 선인장 열매와 줄기를 첨가함에 따라 현저히 감소하였다. 손바닥 선인장의 열매-메탄올 추출물은 그램 음성균 중 Escherichia coli, Escherichia coli O157 : H7과 Salmonella typhimurium에 항균 효과를 나타내었으며, 줄기-메탄올 추출물은 Escherichia coli에만 효과를 나타내었다. 그램 양성균 중 Bacillus subtilis에는 열매-메탄올 추출물이 효과를 나타내었다. 이러한 항균 효과에 의해 손바닥 선인장을 첨가한 생면의 총균수 증가는 대조구보다 적은 것으로 판단되었다.

• 한국염색가공학회지
• /
• 제15권6호
• /
• pp.33-38
• /
• 2003

This study surveys the effects of POY physical properties and processing conditions of belt texturing machine to the textured yarns. The various textured yarns are made with the variations of 1st heater temperature, draw ratio, velocity ratio, and the physical properties of these specimens such as yam linear density, tenacity, breaking strain, and wet and dry thermal shrinkages are measured and analysed with the various processing conditions of texturing machine. Especially, the thermal characteristics of the textured yarns, which are affected at the fabric hands and the determination of the processing conditions in the dyeing and finishing processes, are investigated through the thermal stress analyser and DSC experiments.

• 한국레이저가공학회지
• /
• 제11권1호
• /
• pp.7-11
• /
• 2008

Decapsulation technology is useful to inspect EMC of package device and the etching technology enable to check inside of device by removing plastic molding. Chemical etching method is used widely to fabricate a lot of semiconductor. But the method has some disadvantage due to wet process. Proposed method in this paper shows the application possibility such as fast processing time, processing accuracy and dry process. These result was obtained by directly removing of packed EMC using UV laser.

• 세라미스트
• /
• 제9권6호
• /
• pp.42-48
• /
• 2006

The structural ceramic, such as $A1_2O_3,\;ZrO_2\;and\;Si_3N_4$ have applied as several parts of precision machines, automotives and instruments for semiconductor. The mechanical properties depended on purity, morphology and microstructure of the ceramic and its fabrication process. High purity and fine starting powder for the structural ceramic was prepared mainly by wet process and powder processing such as milling, mixing, drying and granulating strongly influenced on the fabrication process. Powder processing included powder synthesis technology is essential for ceramic manufacture. Also, the advanced mechanical treat[neat in powder processing to create nano composite powder was developed to improve several properties of ceramic materials. Innovation of powder processing will lead to improve mechanical and functional properties of the ceramics.

• Transactions on Electrical and Electronic Materials
• /
• 제16권2호
• /
• pp.62-64
• /
• 2015

We have investigated zinc tin oxide (ZTO) thin films under various silicon ratios. ZTO TFTs were fabricated by solution processing with the bottom gate structure. Furthermore, annealing process was performed at different temperatures in various annealing conditions, such as air, vacuum and wet ambient. Completed fabrication of ZTO TFT, and the performance of TFT has been compared depending on the annealing conditions by measuring the transfer curve. In addition, structure in ZTO thin films has been investigated by X-ray diffraction spectroscopy (XRD) and Scanning electron microscope (SEM). It is confirmed that the electrical performance of ZTO TFTs are improved by adopting optimized annealing conditions. Optimized annealing condition has been found for obtaining high mobility.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.51-56
• /
• 2006

Biases embedded in numerical weather precipitation forecasts by the RDAPS model was determined, quantified and corrected. The ultimate objective is to eventually enhance the reliability of reservoir operation by Korean Water Resources Corporation (KOWACO), which is based on precipitation-driven forecasts of stream flow. Statistical post-processing, so called MOS (Model Output Statistics) was applied to RDAPS to improve their performance. The Artificial Neural Nwetwork (ANN) model was applied for 4 cases of 'Probability of Precipitation (PoP) for wet and dry season' and 'Quantitative Precipitation Forecasts (QPF) for wet and dry season'. The reduction on the large systematic bias was especially remarkable. The performance of both networks may be improved by retraining, probably every month. In addition, it is expected that performance of the networks will improve once atmospheric profile data are incorporated in the analysis. The key to the optimal performance of ANN is to have a large data set relevant to the predictand variable. The more complex the process to be modeled by the ANN, the larger the data set needs to be.

• 한국레이저가공학회지
• /
• 제12권4호
• /
• pp.1-5
• /
• 2009

Conventional patterning based on wet-process for multi-layered film is a relatively complex and costly process though it is a necessary step for fabrication of TFT-LCD module. Recently, a direct pattering by laser has been studied because it is low cost and simple process compared to the wet process. In this work, the selective removal process of multi-layered film (polyimide/indium tin oxide/glass) is studied by modeling the thermal and mechanical behavior for multi-layered structure. Especially, the effects of thickness of polyimide layer are examined.

• Fibers and Polymers
• /
• 제6권2호
• /
• pp.146-150
• /
• 2005

In this paper, friction of air-jet textured yams is investigated. Using a friction measuring apparatus fabricated inhouse, dynamic friction forces of the yams under yarn-to-metal (YM) and yam-to-yam (YY) rubbing modes are measured. The influence of processing variables of air-jet texturing viz., overfeed, air pressure, dry/wet texturing and normal/core-and-effect texturing on dynamic friction is analysed. The results indicate that friction force increases with increasing rubbing speeds and yam input tension. YM dynamic friction decreases initially and then starts to increase at higher overfeeds. YY dynamic friction increases with increasing overfeed. YM dynamic friction decreases with an increase in air pressure while an opposite trend is observed for YY friction. Wet textured yams have higher friction than dry textured yams. Core wetted coreand-effect textured yams have higher friction than normal textured yams.

• 소성∙가공
• /
• 제11권7호
• /
• pp.601-607
• /
• 2002

Optically transparent materials such as fused silica, quartz and crystal have become important in the filed of optics and optoelectronics. Laser ablation continues to grow as an important technique for micromachining and surface modification of various materials, because many problems caused by direct contact between tools and workpiece can be avoided. Especially, laser ablation with excimer lasers enables fine micromachining of transparent materials such as fused silica, quartz and crystal, etc. In this study, laser-induced wet etching of fused silica in organic solution was conducted. KrF excimer laser was used as a light source and acetone solution of pyrene was used as etchant. Changing the number of laser pulses, micro holes of various depths are fabricated.

• 감성과학
• /
• 제5권3호
• /
• pp.61-66
• /
• 2002

최근 고감성 PET 사를 이용하여 생산한 PET 직물은 고감성 의류용 직물로서 많이 사용되고 있다. 이러한 고감성 의류용 PET 직물은 다양한 공정을 거치면서 장력이나 열 등의 영향을 받음으로서 사의 물성의 변화를 초래하여 감성 의류용도의 PET 직물에 많은 결점을 유발시킴으로서 직물 생산시 공정조건 설정 등의 어려움에 직면하고 있다. 이러한 고감성 의류에 치명적인 문제를 유발하는 문제점에 관한 감성사 제조시의 공정조건 변화와 관련된 연구논문은 많이 발표가 되지 못하고 있다. 따라서 본 연구에서는 국내 7개 원사 Maker의 cake내의 Denier 별 PET 사의 물성을 균일한 길이의 Layer를 설정하여 분석, 조사하고 Layer 별 물성 차이와 습·건열 열처리 온도에 따른 사의 수축률 등을 비교함으로서 감성 의류용 직물 생산에 필요한 기초 물성 Data를 제공하고 PET 사의 품질향상을 도모함으로서 최종 감성 의류용 직물 소재 개발에 기여할 수 있는 기초자료를 제공하고자 한다.