• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1604-1612
• /
• 1999

The study was carried out to investigate the quality of the wet noodle added with the powders of nopal and nopalitos from Opuntia ficus-indica. The wet noodles were prepared to the ratio of 3, 6 and 9% (w/w) of the nopal and the nopalitos based on a flour weight. The initial pasting temperature and final viscosity in an amylograph decreased as the increase of the nopal and the nopalitos powders. A cooked weight and volume decreased with the increase of the nopal and the nopalitos powders, while a cooking loss increased. From the sensory evaluation, the wet noodles included 3% nopalitos and 6% nopal powders were similarly evaluated as the noodle used whole wheat flour. Bacterial counts of wet noodle with the nopal and the nopalitos powders were always lower than those of the control. Bacterial counts of wet noodle slowly increased as the increase of the amount of nopal and the nopalitos powders during storage at $4^{\circ}C\;and\;20^{\circ}C$. The methanol extracts from the nopal showed antimicrobial activities against Escherichia coli, Escherichia coli O157 : H7, Salmonella typhimurium, and Bacillus subtilis, while the extracts from the nopalitos showed antimicrobial activity only against Escherichia coli.

• Textile Coloration and Finishing
• /
• v.15 no.6
• /
• pp.33-38
• /
• 2003

This study surveys the effects of POY physical properties and processing conditions of belt texturing machine to the textured yarns. The various textured yarns are made with the variations of 1st heater temperature, draw ratio, velocity ratio, and the physical properties of these specimens such as yam linear density, tenacity, breaking strain, and wet and dry thermal shrinkages are measured and analysed with the various processing conditions of texturing machine. Especially, the thermal characteristics of the textured yarns, which are affected at the fabric hands and the determination of the processing conditions in the dyeing and finishing processes, are investigated through the thermal stress analyser and DSC experiments.

• Laser Solutions
• /
• v.11 no.1
• /
• pp.7-11
• /
• 2008

Decapsulation technology is useful to inspect EMC of package device and the etching technology enable to check inside of device by removing plastic molding. Chemical etching method is used widely to fabricate a lot of semiconductor. But the method has some disadvantage due to wet process. Proposed method in this paper shows the application possibility such as fast processing time, processing accuracy and dry process. These result was obtained by directly removing of packed EMC using UV laser.

• Ceramist
• /
• v.9 no.6
• /
• pp.42-48
• /
• 2006

The structural ceramic, such as $A1_2O_3,\;ZrO_2\;and\;Si_3N_4$ have applied as several parts of precision machines, automotives and instruments for semiconductor. The mechanical properties depended on purity, morphology and microstructure of the ceramic and its fabrication process. High purity and fine starting powder for the structural ceramic was prepared mainly by wet process and powder processing such as milling, mixing, drying and granulating strongly influenced on the fabrication process. Powder processing included powder synthesis technology is essential for ceramic manufacture. Also, the advanced mechanical treat[neat in powder processing to create nano composite powder was developed to improve several properties of ceramic materials. Innovation of powder processing will lead to improve mechanical and functional properties of the ceramics.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.2
• /
• pp.62-64
• /
• 2015

We have investigated zinc tin oxide (ZTO) thin films under various silicon ratios. ZTO TFTs were fabricated by solution processing with the bottom gate structure. Furthermore, annealing process was performed at different temperatures in various annealing conditions, such as air, vacuum and wet ambient. Completed fabrication of ZTO TFT, and the performance of TFT has been compared depending on the annealing conditions by measuring the transfer curve. In addition, structure in ZTO thin films has been investigated by X-ray diffraction spectroscopy (XRD) and Scanning electron microscope (SEM). It is confirmed that the electrical performance of ZTO TFTs are improved by adopting optimized annealing conditions. Optimized annealing condition has been found for obtaining high mobility.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.51-56
• /
• 2006

Biases embedded in numerical weather precipitation forecasts by the RDAPS model was determined, quantified and corrected. The ultimate objective is to eventually enhance the reliability of reservoir operation by Korean Water Resources Corporation (KOWACO), which is based on precipitation-driven forecasts of stream flow. Statistical post-processing, so called MOS (Model Output Statistics) was applied to RDAPS to improve their performance. The Artificial Neural Nwetwork (ANN) model was applied for 4 cases of 'Probability of Precipitation (PoP) for wet and dry season' and 'Quantitative Precipitation Forecasts (QPF) for wet and dry season'. The reduction on the large systematic bias was especially remarkable. The performance of both networks may be improved by retraining, probably every month. In addition, it is expected that performance of the networks will improve once atmospheric profile data are incorporated in the analysis. The key to the optimal performance of ANN is to have a large data set relevant to the predictand variable. The more complex the process to be modeled by the ANN, the larger the data set needs to be.

• Laser Solutions
• /
• v.12 no.4
• /
• pp.1-5
• /
• 2009

Conventional patterning based on wet-process for multi-layered film is a relatively complex and costly process though it is a necessary step for fabrication of TFT-LCD module. Recently, a direct pattering by laser has been studied because it is low cost and simple process compared to the wet process. In this work, the selective removal process of multi-layered film (polyimide/indium tin oxide/glass) is studied by modeling the thermal and mechanical behavior for multi-layered structure. Especially, the effects of thickness of polyimide layer are examined.

• Fibers and Polymers
• /
• v.6 no.2
• /
• pp.146-150
• /
• 2005

In this paper, friction of air-jet textured yams is investigated. Using a friction measuring apparatus fabricated inhouse, dynamic friction forces of the yams under yarn-to-metal (YM) and yam-to-yam (YY) rubbing modes are measured. The influence of processing variables of air-jet texturing viz., overfeed, air pressure, dry/wet texturing and normal/core-and-effect texturing on dynamic friction is analysed. The results indicate that friction force increases with increasing rubbing speeds and yam input tension. YM dynamic friction decreases initially and then starts to increase at higher overfeeds. YY dynamic friction increases with increasing overfeed. YM dynamic friction decreases with an increase in air pressure while an opposite trend is observed for YY friction. Wet textured yams have higher friction than dry textured yams. Core wetted coreand-effect textured yams have higher friction than normal textured yams.

• Transactions of Materials Processing
• /
• v.11 no.7
• /
• pp.601-607
• /
• 2002

Optically transparent materials such as fused silica, quartz and crystal have become important in the filed of optics and optoelectronics. Laser ablation continues to grow as an important technique for micromachining and surface modification of various materials, because many problems caused by direct contact between tools and workpiece can be avoided. Especially, laser ablation with excimer lasers enables fine micromachining of transparent materials such as fused silica, quartz and crystal, etc. In this study, laser-induced wet etching of fused silica in organic solution was conducted. KrF excimer laser was used as a light source and acetone solution of pyrene was used as etchant. Changing the number of laser pulses, micro holes of various depths are fabricated.

• Science of Emotion and Sensibility
• /
• v.5 no.3
• /
• pp.61-66
• /
• 2002

Recently PET fabrics woven by high sensitive PET yams were used as a high sensitive clothing. Such high sensitive PET woven fabrics for clothing are passing through various processes, and are influenced by processing tension and heat, it makes the physical properties of PET yarns changing and makes the defects of PET fabric. Therefore many difficulties are faced to decide processing conditions for making high sensitive PET fabric. But few research related to the processing conditions of PET yarns and issue point for producing high sensitive clothing was only performed. In this study, POY and SDY of PET manufactured in seven filament manufacturing companies are selected, and their physical properties in each layers of filament cake divided by 50000m are measured and analyzed. Especially, wet and dry shrinkages according to the various wet and dry heat temperatures are analyzed for supplying basic physical data of PET yam and for enhancing PET yarn quality used for the high sensitive clothing.