• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.10-16
• /
• 1997

This study was carried out to improve coating structure by controlling the electrostatic interaction of coating components and by changing the coating structure of coated paper prepared with amphoteric and anionic latices. The results indicated that amphoteric latex copolymerized with carboxylic and amine groups had stronger interaction with other coating components than anionic latex with branched carboxylic group by controlling pH. These properties of amphoteric latex showed positive effects on viscosity rheology, and supernatant sediment of coating color. The coated paper using amphoteric latex had also produced more porous and smoother coverage of the coating layer than that using anionic latex. This porous and smooth coating layer showed better optical properties and printability than those of anionic latex such as opacity, porosity, ink set-off, and wet ink receptivity.

• 펄프종이기술
• /
• 제45권5호
• /
• pp.37-43
• /
• 2013

This study was focused on applying a new paper coating binder, vinyl acetate-ethylene(VAE) emulsion, with SB-latex and acrylic emulsion for paper coating application. VAE emulsion has a low monomer cost and is non-toxic chemical than conventional adhesive for paper coating such as styrene-butadiene latex( SB-latex) and acrylic emulsion. We conducted double coating in order to test VAE emulsion, which was applied on top surface only. The results showed that optical properties of the coated paper with VAE were similar with the SB-latex binders. In case of bonding strength, dry-pick of the coated paper with VAE showed almost same with other binders while wet-pick of the coated paper with VAE had a little bit lower strength than that with SB-latex.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.521-526
• /
• 2002

In this paper, we described about the characteristic evaluation of environment-friendly ceramic paint with calcium-silicate mineral as a main binder. Particularly, we performed discharge of the environmental poisoning materials(e.g. VOCs, heavy metal, etc.), and properties of paint slurry and coating film of the ceramic paint. In the comparison of the ceramic paint with natural paint and mineral paint which were known as our environment-friendly paints, ceramic paint had good characteristics in the environmental safety and properies of wet slurry and dried coating film.

• 한국인쇄학회지
• /
• 제15권2호
• /
• pp.25-40
• /
• 1997

This research was carried out to investigated the effect of base paper and latex binder on printability and obtical properties of coated paper. Especially, it examined the effect of th pH of vase paper surface and functional groups of latices on the interactions between coating color components and on the structure of coated layer. It was found that the behavior of coating color containing amphoeric latex depends on the pH in the boundary region between coating color and base paper. Thus, the coating color formulated with amphoteric latex formed bulky coating layer by inducing stronger interaction between paper surface and coating components than the coating color with anionic latex. The coated paper with amphoteric latex showed better optical properties (i.e.gloss and optical) and printability (i.e. ink receptivity, wet ink receptivity, and ink set off) than the conventional anionic latex in the acidic and alkaline paper. However, dry pick strength of the coated paper was less decreased. This result indicated that amphoteric latex could also be applied practically to the alkaline paper.

• 대한화장품학회지
• /
• 제36권3호
• /
• pp.227-231
• /
• 2010

파우더 파운데이션은 사용이 간편하고 수정화장이 용이하여 고객들이 많이 사용하고 있으며, 파우더 파운데이션을 만드는 방법은 건식방식, 소성방식, 그리고 습식방법으로 크게 분류할 수가 있다. 이 중 습식방법은 이미 잘 알려진 바와 같이 back injection 방법과 front injection 방법이 있으며, 본 논문에서는 front injection 방법을 사용해 실험을 진행하였다. 실험결과 용매의 종류에 따른 경도 변화를 살펴보면 휘발성 실리콘이나 탄화수소계 휘발성 물질을 이용할 때 보다 정제수를 이용할 때 경도가 높게 나타났으며, 사용감 측면에서는 물보다는 탄화수소계 휘발성 물질과 휘발성 실리콘 등을 사용했을 때, 고객 선호도가 높게 나타났다. 또한 코팅물질 변화에 따른 경도 변화로는 아미노산계 코팅물질을 사용하였을 때 경도가 상승하는 효과를 나타냈으며, 실리콘 코팅 물질을 사용했을 때 경도 상승효과가 미비한 것으로 나타났다. 이러한 결과를 토대로 각 대상 고객에 맞는 처방을 개발하고자 할 때 사용감과 경도의 상관관계를 알고, 처방설계에 이용한다면 고객이 원하는 사용감에 한발 더 접근할 수 있으리라 생각된다.

• 펄프종이기술
• /
• 제37권4호통권112호
• /
• pp.26-31
• /
• 2005

The purpose of this study was to confirm paper strengthening properties with recently commercialized polyvinylamine. Because of its high cationic charge density, polyvinylamine has been investigated as a size retention and surface coating aids. In this study, we tried to confirm polyvinylamine as wet-end additives to improve dry and wet strength using LBKP and BCTMP pulps. As a result, we found improvement of dry and wet tensile properties of polyvinylamine with BCTMP were much better than LBKP condition. This phenomena could be explained that ionic bonding of cationic charge of polyvinylamine with abundant anionic substances of BCTMP was a very important factor to improve dry and wet strength of paper.

• 한국재료학회지
• /
• 제7권1호
• /
• pp.76-80
• /
• 1997

용융탄산염 연료전지 분리판의 wet-seal부의 내식성 향상을 위한 NiAl 피복공정이 조사되었다. AlSl 316 스테인레스강위에 Ni과 Al를 순차적으로 피복한 후, $800^{\circ}C$에서 3시간 열처리하여 NiAl상이 형성됨을 확인할 수 있었다. NiAl상이 피복된 스테인레스강은 $650^{\circ}C$, 용융탄산염($62^{m}/_{o}Li_2CO_3-38^{m}/_{o}/K_{2}CO_{3}$)내에서 침지시험을 통해 내식성이 평가되었는데, AISI 316 스테인레스강에 비해 우수한 내식성을 보였다. 이는 표면에 치밀하게 형성된 AI 산화물층에 의한 것으로 판단되었다.

• Korean Chemical Engineering Research
• /
• 제47권3호
• /
• pp.316-320
• /
• 2009

폴리카보네이트(polycarbonate)는 가볍고, 내충격성 및 가공성이 우수하여 광학기기의 렌즈 및 각종 건축물의 투명 소재 등에 유리의 대체품으로서 널리 이용되고 있으나 낮은 표면경도를 가지고 있어 유통 또는 사용시의 접촉으로 인하여 제품에 손상을 줄 염려가 있다. 따라서 본 연구에서는 폴리카보네이트 필름에 아크릴레이트 올리고머, 모노머, 용매, 염료, 실리콘 아크릴레이트, 그리고 광개시제 등을 다양한 함량비율에 따라 혼합한 코팅용액을 제조하고, 구성 성분의 비율에 따른 폴리카보네이트 필름의 표면 경도, 접착력, 그리고 투과율의 변화를 실험하였다. 그 결과 최대 연필 경도가 2H이고, 접착력과 가시광선 투과율이 우수한 코팅용액의 조성을 얻었다. 색상코팅 실험 결과, 기존 산화물 증착에 의해 구현하던 색상을 본 실험에서 제조한 코팅 용액을 사용하여 거의 대부분 구현할 수 있었으며, 이를 바탕으로 색상 윈도우 렌즈를 제작한 결과, 매우 깨끗하고 균일한 색상과 표면을 가졌다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.137-137
• /
• 2010

This research proposed an advanced Electronic bead (EB) using MMA (Methy methacrylate) and CCA (Charge Control Agent). In the first, this paper presents about measurement method and characterization analysis of EB with wet coating method. Furthermore, this work presents the positive and negative EB fabrication procedure. As the experimental results, the proposed EB with charge to ratio[Q/M] is very attractive to Electronic paper driving characterization.

• 고문화
• /
• 66호
• /
• pp.87-112
• /
• 2005

Stain removal on ivory has been, for a long time, considered an undesirable treatment in conservation field because ivory is hygroscopic and anisotropic, having different physical properties in different directions. Cyclododecane, which sublimes at room temperature, has been investigated for its use in conservation field since 1995, as a reversible temporary consolidant, sealing agent or coating, water repellent, and barrier layer. This research aims to remove stains on ivory, temporarily protecting the none-stained area or painted area from methanol, acetone or the aqueous cleaning system using cyclododecane as a hydrophobic sealing agent. This research also aims to obtain information regarding whether cyclododecane can be safely and effectively used on archaeological wet ivory. Melted cyclododecane and saturated solutions of cyclododecane in mineral spirits, and hexanes were applied to ivory samples. Application methods, working properties of cyclododecane on ivory, and effect of cyclododecane coating on moisture content of wet ivory were evaluated. The sealing layer formed by molten cyclododecane or by saturated cyclododecane solution in hexane or saturated cyclododecane solution in mineral spirits did not form a secure contact with the surface of the highly polished ivory. The sealing formed with two different layers, in which saturated cyclododecane solution in hexane was applied initially and then molten cyclododecane was applied over the first layer, was found to securely protect the painted area. When the wet samples were kept in 100% RH environments for a month, active mold growths were observed except in the samples sealed with molten cyclododecane. In conclusion, cyclododecane was an efficient hydrophobic sealing agent to protect painting area while cleaning stains on ivory. It also prevented mold growing on wet ivory and wet bone. Evenness of cyclododecane film on ivory will be determined in UV light. Analytical techniques will include visual observation, polarized light microscopy, Scanning Electron Microscope, and Gas Chromatography.