• 제목/요약/키워드: well-aging

검색결과 1,158건 처리시간 0.03초

Tan Delta 측정을 이용한 유침 절연지의 열화특성 분석 (Analysis of Degradation Characteristics for Oil-Paper Insulation using Tan Delta Measurement)

  • 김정태;김우빈
    • 전기학회논문지
    • /
    • 제65권9호
    • /
    • pp.1518-1523
    • /
    • 2016
  • In this study, in order to understand the degradation characteristics of oil-paper insulation for power transformers and OF cables, tan delta was measured using cable model specimens with long-term accelerated thermal and electrical aging. In addition, to find out the degradation level due to the accelerated aging, tensile strengths of aged papers were measured. As a result, tan ${\delta}$ showed the characteristics of slight decrease at the first stage and then increase with the aging time, which could be analyzed due to the evaporation of remaining moisture and the change of aging rate with time. Also, the trend of tensile strengths with aging temperature and time was appeared to be exponentially decreased and by use of these data equivalent calculated lifetimes and accelerated aging factors were derived for each aging temperatures. After then, tan ${\delta}$ was analyzed with the equivalent operating years. For all different aging temperatures, the aged data were very well fit to the equivalent operating years and it is shown that tan ${\delta}$ was increased with the decrease of tensile strength.

Al2O3 첨가에 따른 7xxx계 알루미늄 소결체의 시효특성 변화 (Aging Characteristics of 7xxx Series Al Composites with Al2O3)

  • 민경호;박광현;서영익;장시영;김영도
    • 한국분말재료학회지
    • /
    • 제13권3호
    • /
    • pp.172-177
    • /
    • 2006
  • Aging characteristics and mechanical properties of commercial 7xxx series Al composites were investigated from viewpoint of ceramic contents. After sintering process, sintered densities of blended and composite powder were 95 and 97%, respectively. Each part was solution-treated at $475^{\circ}C$ for 60 min and aged $175^{\circ}C$. And two-step aging was also performed form $120^{\circ}C$ to $175^{\circ}C$. The aging behavior of the sintered composite pow-der was different from that of sintered blended powder. The peak aging time of the composite was rapid as well due to strain. Before aging, mechanical properties of sintered composite powder was significantly higher than that of sintered blended powder. These increments of properties were directly affected by ceramic particles. However, after aging, incremental rate of mechanical properties was slowed in the composite.

A comprehensive study of the effects of long-term thermal aging on the fracture resistance of cast austenitic stainless steels

  • Collins, David A.;Carter, Emily L.;Lach, Timothy G.;Byun, Thak Sang
    • Nuclear Engineering and Technology
    • /
    • 제54권2호
    • /
    • pp.709-731
    • /
    • 2022
  • Loss of fracture resistance due to thermal aging degradation is a potential limiting factor affecting the long-term (80+ year) viability of nuclear reactors. To evaluate the effects of decades of aging in a practical time frame, accelerated aging must be employed prior to mechanical characterization. In this study, a variety of chemically and microstructurally diverse austenitic stainless steels were aged between 0 and 30,000 h at 290-400 ℃ to simulate 0-80+ years of operation. Over 600 static fracture tests were carried out between room temperature and 400 ℃. The results presented include selected J-R curves of each material as well as K0.2mm fracture toughness values mapped against aging condition and ferrite content in order to display any trends related to those variables. Results regarding differences in processing, optimal ferrite content under light aging, and the relationship between test temperature and Mo content were observed. Overall, it was found that both the ferrite volume fraction and molybdenum content had significant effects on thermal degradation susceptibility. It was determined that materials with >25 vol% ferrite are unlikely to be viable for 80 years, particularly if they have high Mo contents (>2 wt%), while materials less than 15 vol% ferrite are viable regardless of Mo content.

Aging 효과에 따른 모래의 비배수 정적전단거동 특성 (Characteristics of Undrained Static Shear Behavior for Sand Due to Aging Effect)

  • 김영수;김대만
    • 한국지반공학회논문집
    • /
    • 제20권6호
    • /
    • pp.137-150
    • /
    • 2004
  • 모래의 aging 현상은 점성토에 비하여 무시할 정도로 매우 작아서 최근까지 연구되지 않았다. 그러나 퇴적이나 교란 후 시간경과에 따라 관입저항치의 증가가 관찰되면서 현장시험을 중심으로 모래의 aging 효과에 대하여 활발한 조사가 이루어졌고, 최근에는 현장시험뿐만 아니라 실내시험에서도 여러 연구자들에 의해 모래의 aging 효과가 규명 되어지고 있다. 본 연구에서는 모래의 비배수 정적전단거동에 대한 aging 효과를 살펴보기 위해 낙동강 모래를 이용하여 상대밀도 $(D_r)$, 압밀응력비$(K_c)$ 그리고 압밀시간을 달리하여 비배수 정적삼축압축시험을 실시하였다. 그 결과 응력-변형률의 탄성구간내 탄성계수가 압밀시간 경과에 따라 증가하는 것으로 나타났으며, 또한 상전이점 강도$(S_{PT})$와 한계응력비점 강도$(S_{CSR})$도 압밀시간 경과에 따라 증가하였다. 그러나 간극수압비$(u/{p_c}')$는 압밀시간에 비례하게 감소하는 등 모래의 정적전단에서 나타나는 aging 효과를 관찰할 수 있었다.

냉음극 방전관의 기동특성 안정화에 관한 연구 1

  • 지철근
    • 전기의세계
    • /
    • 제14권3호
    • /
    • pp.18-27
    • /
    • 1965
  • It is well known that the starting characteristics of the cold cathode type discharge tubes are irregular. We have two kinds of stabilization for starting characteristics of discharge tubes. Which are the aging test immediately after producing the tubes and the using characteristics. This paper was devoted primaliry to the empric study of relation between the aging and the manufacturing process. And then to stabilize the starting characteristics of discharge tubes by the irradiations of radio-isotope.

  • PDF

골격근의 노화에 대한 고찰 (A Review of Journals on the Aging Skeletal Muscle)

  • 권오봉;송윤경;임형호
    • 대한추나의학회지
    • /
    • 제4권1호
    • /
    • pp.55-65
    • /
    • 2003
  • The purpose of this article was to contribute to the knowledge of physiological and pathological changes of aging skeletal muscles, and of therapic method. By aging there were changes of distribution of muscle fibers, the loss of muscle mass, the loss of the number of muscle fibers, the loss of glycolysis capacity, the decrease of the oxidative enzymes and muscle vascularization in the skeletal muscles. And as a pathological change, the exhaustive maximal exercise increased oxidative stress that led to oxidative damage which were shown to be implicated in promoting aging. The property of intensity and duration exercise is important not only in keeping human health and physical fitness from oxidative stress, but also for the maintenance of well-being and quality of life.

  • PDF

LIPID-SOLUBLE VC DERIVATIVE ASCORBIC ACID TETRA-2-HEXYLDECANOATE (VC-IP) AS AN ANTI-AGING AGENT

  • Obayashi, K.;Ochiai, Y.;Ochiai, Y.;Masaki, H.;Kurata, Y.
    • 대한화장품학회:학술대회논문집
    • /
    • 대한화장품학회 2003년도 IFSCC Conference Proceeding Book I
    • /
    • pp.313-319
    • /
    • 2003
  • It is well known that ascorbic acid (VC) is an important factor for several physiological reactions. In the skin, VC works as an anti-aging agent due to removing of oxidative stress generated by UV irradiation and stimulation of collagen synthesis. Thus, developing more effective VC derivatives is an important issue in creating anti-aging skin care products. Our study succeeded to develop a novel ascorbic acid derivative, ascorbic acid tetra-2-hexyldecanoate (VC-IP), which is a lipid-soluble pro-VC. The purpose of this study was to indicate the effects of VC-IP as pro-VC and anti-aging agent. First, it was examined whether VC-IP is converted to VC in physiological conditions. Since VC was detected from the cell extracts treated with VC-IP, it was indicated that VC-IP is a pro- VC.(omiited)

  • PDF

시료에 따른 Sn1.8Bi0.8Cu0.6In솔더의 미세구조 (Micorstructure of Sn1.8Bi0.8Cu0.6In alloy during thermal aging)

  • 이재식;전주선;박종우;정재필
    • 한국마이크로전자및패키징학회:학술대회논문집
    • /
    • 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
    • /
    • pp.94-98
    • /
    • 2003
  • The microstructure of Sn1.8Bi0.8Cu0.6In alloys was evaluated at various aging time. The bumps of Sn1.8Bi0.8Cu0.6In alloys after reflowed at $250^{\circ}C$ were well-formed and had 260um height. The craters on the bumps, however, were observed. Intermetallic compounds formed on the interface between so]der and Cu/Ni UBM were consist of $(Cu,Ni)_6Sn_5$. As aging goes on up to 1000hours, the composition of Ni changed from $6.63\%$ at initial stage(as-reflowed) to $13.47\%$ at final stage(1000hours aging ). In addition, after 500hours aging, the floating of IMC to the solder was observed.

  • PDF

Coupled chemical and mechanical processes in concrete structures with respect to aging

  • Cramer, Friedhelm;Kowalsky, Ursula;Dinkler, Dieter
    • Coupled systems mechanics
    • /
    • 제3권1호
    • /
    • pp.53-71
    • /
    • 2014
  • Accurate prognoses of the durability of concrete structures require a detailed description of the continuously running aging processes and a consideration of the complete load history. Therefore, in the framework of continuous porous media mechanics a model is developed, which allows a detailed analysis of the most important aging processes of concrete as well as a flexible coupling of different processes. An overview of the prediction model and the balance equations is given. The material dependent model equations, the consequences of coupling different processes and the solution scheme are discussed. In two case studies the aging of concrete due to hydration and chloride penetration are presented, which illustrate the capabilities and the characteristics of the developed model.

A Machine Learning Approach to Detect the Dog's Behavior using Wearable Sensors

  • Aich, Satyabrata;Chakraborty, Sabyasachi;Joo, Moon-il;Sim, Jong Seong;Kim, Hee-Cheol
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2019년도 춘계학술대회
    • /
    • pp.281-282
    • /
    • 2019
  • In recent years welfare of animals is the biggest challenge because animals, especially dogs are widely recognized as pet as well as they are using as service animals. So, for the wellbeing of the dog it is necessary to perform objective assessment to track their behavior in everyday life. In this paper, we have proposed an automatic behavior assessment system for dogs based on a neck worn and tail worn accelerometer and gyroscope platform, and data analysis techniques that recognize typical dog activities. We evaluate the system based on the analysis of 8 behavior traits in 3 dogs, incorporating 2 breeds of various sizes. Our proposed framework able to reproduce the manual assessment that is based on the video recording which is treated as gold standard that exhibits the real-life use case of automated dog behavior analysis.

  • PDF