• 제목/요약/키워드: well log

검색결과 708건 처리시간 0.027초

Optimization Design of Log-periodic Dipole Antenna Arrays Via Multiobjective Genetic Algorithms

  • Wang, H.J.
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
    • /
    • pp.1353-1355
    • /
    • 2003
  • Genetic algorithms (GA) is a well known technique that is capable of handling multiobjective functions and discrete constraints in the process of numerical optimization. Together with the Pareto ranking scheme, more than one possible solution can be obtained despite the imposed constraints and multi-criteria design functions. In view of this unique capability, the design of the log-periodic dipole antenna array (LPDA) using this special feature is proposed in this paper. This method also provides gain, front-back level and S parameter design tradeoff for the LPDA design in broadband application at no extra computational cost.

  • PDF

직선배열 진동자에 의한 도풀러 로그의 지향특성 개선에 관한 연구 (Improvement of the Directivity of a Doppler Log Using Linear Transducer Array)

  • 신형일;정세모
    • 한국항해학회지
    • /
    • 제5권2호
    • /
    • pp.1-39
    • /
    • 1981
  • A doppler log is the typical device which can measure the ship's speed over the ground directly, by means of doppler effect of the underwater ultrasonic wave, which involves the error due to the sea bottom inclination, the trim and the incorrect transducer installation etc. The present doppler log adopts a single transducer, faced in the direction of themain beam, and therefore it is unable to correct the beam direction to eliminate the above mentioned error. Moreover, the frequencyis also limitted in a comparatively high range for getting a sharp beam with single transducer, and the speed over the ground can not be detectable at the deep sea, for an instance, over 200 meters. This paper describes a theoretical consideration for the doppler log error and an analysis by a computer on the observed speed data by a full size model ship. The result is verified that the most of doppler log error is caused by the ultrasonic beam angle of transducer. To eliminate the doppler log error due to the incorrect transducer installation and also to sharpen the beam for lower frequency range to expand measurable sea depth, this paper proposes a method of controlling the directivity adopting a linear transducer array and of controlling the directivity by the control of exciting current, and investigates by the computer simulation and make experiment with magnetostrictive ferrite transducer of 28, 50 and 75KHz. The experimental results are shown well coincide with the measured ones, and they are revealed that in case where the transducer interval is greater than 1 wavelength, the effective control of the beam direction is hardly performed with keeping adequate beam width and side lobe level. It is concluded that 6-elements array with inter element space of a half wavelength can make comparatively sharp beam and low side lobe level. The results obtained here will contribute very much to the improvement of the performance of doppler log.

  • PDF

소규모 한과제조업체의 제조공정에 대한 미생물 오염 조사 (Investigation of microbial contamination on manufacturing processes for small-scale Korean traditional cookies manufacturers)

  • 김솔아;이정은;박현진;박미선;최송이;심원보
    • 한국식품위생안전성학회지
    • /
    • 제36권6호
    • /
    • pp.493-503
    • /
    • 2021
  • 본 연구에서는 한국 전통 과자인 유과와 강정을 원·부재료와 기기 및 도구, 작업자의 개인위생, 제조공정별 원료에 대한 미생물학적 오염을 분석하였다. 유과제조 과정 중 현장에서 사용하고 있는 세척 방법과 횟수에 따른 미생물 저감효과를 확인하고자 하였다. 강정의 제조 공정 중 튀밥에서 일반세균수 1.2 Log CFU/g, 완제품의 경우 3.7 Log CFU/g까지 점차 증가하였다. 유과의 제조 공정 중 일반세균수는 불림공정에서 일반세균 최대 6.5 Log CFU/g 수준으로 증가하다가 튀김공정에서 1.3 Log CFU/g수준으로 감소하였으나 완제품에서 4.0 Log CFU/g 수준으로 재 오염되는 것으로 확인되었다. 이는 제조과정 중에 작업도구와 기기 또는 작업자 등에 의한 교차오염으로 판단되었다. 작업 도구인 주걱의 경우 일반세균 약 4.4 Log CFU/g, 대장균군 4.2 Log CFU/g으로 매우 오염도가 나타났다. 유과의 불림단계에서 7일동안 일반세균 수가 최대 10 Log CFU/g 이상, 대장균군의 경우 6.8 Log CFU/g으로 증가하였다. 손 또는 도구를 이용한 세척 방법과 흐르는 물에 세척한 방법을 비교하였을 때, 손을 이용하여 수돗물로 10회 세척하였을 때 일반세균 5.0 Log CFU/g, 대장균군 2.8 Log CFU/g 감소한 것으로 확인되었다. 이상의 결과로 볼 때, 소규모 업체의 전통 한과 제조 시 작업자나 작업 도구 및 기기 사용 후 세척 및 소독하는 과정이 요구되며 완제품의 미생물 오염도를 감소시키기 위해 현장에 적용할 수 있는 저감화 방법이 필요한 것으로 판단되었다.

User modeling based on fuzzy category and interest for web usage mining

  • Lee, Si-Hun;Lee, Jee-Hyong
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • 제5권1호
    • /
    • pp.88-93
    • /
    • 2005
  • Web usage mining is a research field for searching potentially useful and valuable information from web log file. Web log file is a simple list of pages that users refer. Therefore, it is not easy to analyze user's current interest field from web log file. This paper presents web usage mining method for finding users' current interest based on fuzzy categories. We consider not only how many times a user visits pages but also when he visits. We describe a user's current interest with a fuzzy interest degree to categories. Based on fuzzy categories and fuzzy interest degrees, we also propose a method to cluster users according to their interests for user modeling. For user clustering, we define a category vector space. Experiments show that our method properly reflects the time factor of users' web visiting as well as the users' visit number.

Low Complexity Decoder for Space-Time Turbo Codes

  • 이창우
    • 한국통신학회논문지
    • /
    • 제31권4C호
    • /
    • pp.303-309
    • /
    • 2006
  • By combining the space-time diversity technique and iterative turbo codes, space-time turbo codes(STTCS) are able to provide powerful error correction capability. However, the multi-path transmission and iterative decoding structure of STTCS make the decoder very complex. In this paper, we propose a low complexity decoder, which can be used to decode STTCS as well as general iterative codes such as turbo codes. The efficient implementation of the backward recursion and the log-likelihood ratio(LLR) update in the proposed algorithm improves the computational efficiency. In addition, if we approximate the calculation of the joint LLR by using the approximate ratio(AR) algorithm, the computational complexity can be reduced even further. A complexity analysis and computer simulations over the Rayleigh fading channel show that the proposed algorithm necessitates less than 40% of the additions required by the conventional Max-Log-MAP algorithm, while providing the same overall performance.

A rice-lognormal channel model for nongeostationary land mobile satellite system

  • 황승훈;한규진;안재영;서종수;황금찬
    • 한국통신학회논문지
    • /
    • 제23권4호
    • /
    • pp.1113-1120
    • /
    • 1998
  • This paper introduces a channel model that is a combination of Rice and log-normal statistics, with independent shadowing affectingeach direct and diffuse component, repectively. This model extends the channel model of a combined Rice and Log-normal, proposed by Corazza, to include the independent shadowing. The validity of model is confirmed by comparisons with the data collectedin the literature, the analytical model, and the computer model in terms of probability distribution of the evvelope of each model. The model turns out to be one of many well-known narrowband models in limiting cases, e.g. Rayleigh, Rice, log-normal, Suzuki, Loo, and Corazza. Finally, the examples of bit error probability evaluations for several values of the elevation angle in the channel are provided.

  • PDF

수정 분할자법을 이용한 절리 거칠기 계수(JRC)의 정량화 (Estimation of Joint Roughness Coefficient(JRC) using Modified Divider Method)

  • 장현식;장보안;김열
    • 지질공학
    • /
    • 제15권3호
    • /
    • pp.269-280
    • /
    • 2005
  • Barton and Choubey(1977)가 제안한 표준 거 칠기 단면을 0.1mm 간격으로 수치화한 후 수정 분할자법을 이용하여 분할자 길이에 따른 단면의 길이를 측정하였다. 분할자 길이에 따른 단면의 길이를 log-log 그래프에 도시 한 후 직선회기 분석 을 통하여 표준 거 칠기 단면의 프랙탈 차원과 절편을 구하고, JRC와의 관계를 분석하였다. 정확한 프랙탈 차원을 계산할 수 있는 분할자의 길이 범위인 교차거리는 $0.3\sim2.4mm$ 내외이며, JRC는 프랙탈 차원보다는 절편과 더 높은 상관도를 보였다. 그러나 프랙탈 차원과 절편을 곱하였을 때 가장 좋은 상관도를 보였으며, 위의 결과를 이용하여 프랙탈 차원과 절편을 이 용한 새로운 IRC 추정식 을 도출하였다. 23개의 자연 암석 절리의 단면을 수치화하여 $Z_2$ 파라미터를 이용한 Tse and Cruden (1979) 식과 새로운 JRC 관계식으로 각 단면의 JRC를 계산하고 이를 비교하였다. 비교 결과 두 관계식으로 추정된 JRC는 매우 유사하여, 본 연구에 서 도출된 새로운 관계식은 IRC를 추정하는데 매우 유용할 것으로 판단된다.

신경회로망을 이용한 손으로 작성된 논리회로 도면 인식 알고리듬 (A Recognition Algorithm for Handwritten Logic Circuit Diagrams Using Neural Network)

  • 김덕령;박성한
    • 대한전자공학회논문지
    • /
    • 제27권10호
    • /
    • pp.68-77
    • /
    • 1990
  • 본 논문에서는 CAD 시스템의 신경망을 이용한 자동 입력기 구축을 위한 논리 심볼 인식방법을 제시한다. 손으로 작성한 도면을 인식하기 위해 특징 추출과 log mapping, 그리고 패턴 인식의 다단계 과정을 거친다. 각 논리 심볼의 현태 정보를 추출하기 위해 억제 가중치를 학습할 수 있는 경쟁 학습법을 제안하고 회전과 크기의 변화를 병진된 결과로 나타내는 log mapping을 하고 형태가 변한 심볼을 인식할 수 있도록 겹쳐지는 수용야(Receptive field)를 준비하여 error back propagation을 이용한 다층망으로 심볼을 인식한다.

  • PDF

PIV 기법을 이용한 초음속 평판 경계층의 속도 분포 측정 (Velocity profile measurement of supersonic boundary layer over a flat plate using the PIV technique)

  • 이혁;김영주;변영환;박수형
    • 한국항공우주학회지
    • /
    • 제44권6호
    • /
    • pp.477-483
    • /
    • 2016
  • 본 연구는 Particle Image Velocimetry(PIV) 기법을 이용하여 마하수 2.96의 평판에 대해 층류, 천이, 난류 경계층의 속도 분포를 측정하였다. Schlieren 가시화 기법과 PIV 기법을 이용하여 앞전에서 발생한 경사 충격파가 평판 위의 유동장에 영향을 주는지 확인하였다. 층류 경계층의 경우, 실험에서 측정한 속도 분포가 압축성 Blasius 속도 분포를 만족하였다. 천이 경계층의 속도 분포는 벽면 부근부터 이론적인 난류 속도 분포로 변했으며, Re = $1.41{\times}10^6$에서 천이가 시작되었다. 난류 경계층 영역에서는 압축성 효과를 고려한 Van Driest 변환 속도가 비압축성 로그 법칙을 만족하였다. 또한 로그 구간이 끝나는 위치($y/{\delta}{\approx}0.28$)가 비압축성 난류 경계층($y/{\delta}{\approx}0.2$)에 비해 벽면에서 더 멀어진 것을 확인하였다.