• 한국자동차공학회논문집
• /
• 제8권1호
• /
• pp.72-84
• /
• 2000

To analyze the correlation between drivetrain systems and to optimize the vehicle design with satisfying of the initial design objects, the performance sensitivity analysis through the iterative design procedure must be carried out. In this study, effects of the design parameters for the main components of the parallel type hybrid drivetrain system are analyzed by using the developed method of the vehicle performance simulation, and the basis of the optimal selection of the design parameters from the relation of design constraints and required performances is suggested. In driving control of the parallel hybrid vehicle, power split ratio is the most important factor, and the improved drivetrain system can be constructed through the only change of the algorithm for determination of the power spilt ratio, which is strongly applicable to the driving patterns and the environments. Therefore, Various techniques, such as the change of the weighting factors and the range extended algorithm, are suggested and evaluated in this paper.

• 한국농공학회논문집
• /
• 제46권7호
• /
• pp.23-32
• /
• 2004

A spatial simulation model for rural and urban sprawl phenomena was developed with GIS and cellular automata techniques. The model finds out built-up areas invading toward rural areas required for development of existing urban area. Probability of land use change for optimizing the development area was determined using a land suitability analysis method interfaced with GIS methods, based on several criteria in terms of geographic and accessibility factors such as slope of land and distance from city center. Weighting values of the criteria were quantified by an analytic hierarchy process method. For model applicability test, the parameters of criteria were calibrated based on the changes in time series land use data of the test city for 1986, 1996, and 2000, which were classified by remote sensing techniques. Simulated and observed areas in land use maps for city shape of 1996 showed good similarities with each other through a morphology verification method. The model enabled us to evaluate the spatial expansion phenomena of cities considering boundary conditions, and also to simulate land use planning for rural areas in urban fringe.

• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.29-36
• /
• 2005

In oder to generate various shock signals in a field study, a passenger car was driven at several speeds over road profiles that included a number of half sine shaped bumps of various heights. A triaxial SAE pad sensor was mounted on the front passenger seat to measure the acceleration signals which might produce subjective discomfort. The measured accelerations were correlated with the subjective assessments of 14 subjects. The magnitude of subjective discomfort was found to be proportional to the VDV and also the peak to peak of the frequency weighted acceleration signal.

• 한국자동차공학회논문집
• /
• 제16권6호
• /
• pp.48-57
• /
• 2008

This paper shows the procedure to decide an optimal design principle for improving the disassemblability with considering of disassembly conditions. On the bssis of the disassembly mechanism of products and the structure of parts and subassembly, the disassemblability is classified into four categories: graspability, accessibility, transmission of disassembly power and handling. The weighting values of the influential factors are calculated by the method of AHP(Analytic Hierarchy Process). The disassemblability is evaluated quantitatively. We established some score tables for the evaluation. Using these score tables, several principles for higher disassemblability in accordance with work conditions can be decided. An optimal design principle can be found by the comparison with the total scores of some disassembly conditions.

• 한국대기환경학회지
• /
• 제8권2호
• /
• pp.105-111
• /
• 1992

The characteristics of suspended particulate matters(dust) in Seoul had been studied. The effects of various environmental factors, such as passengers, motor vehicles, wind velocity, wind direction, temperature and humidity were examined during the study period. It was shown that the dust emission occurred through the heating was the major source, and the contribution of passengers and motor vehicles was relatively negligible during the night. It was also revealed that the number concentration between $0.5{\mu}m$ and $2.0{\mu}m$ was increased due to the attachment among the dusts and mists by the increased humidity during the night. Considering the fact that the particles larger than $2{\mu}m$ take the most part of weight concentration, it was suggested that the PM-10 method which considered respirable particle as a weighting factor should be adapted in the evaluation air quality.

• 한국통신학회논문지
• /
• 제29권9C호
• /
• pp.1252-1257
• /
• 2004

본 논문에서는 TITO 시스템에서 분산된 LQ-PID 제어기 설계방법을 제안하고,주파수 영역의 설계사양인 명령추종, 외란제거, 센서 잡음 저감도를 만족하도록 제어기를 설계하였다. 설계방법은 PID 제어요소를 포함한 폐루프 상태방정식과 LQR 폐루프 상태방정식의 관계를 유도하고 루프형성절차를 통해 가격함수의 가중치 요소 Q와 R을 선정함으로써 성능 및 안정도 강인성이 보장되도록 하였다.

• 한국통신학회논문지
• /
• 제28권11C호
• /
• pp.1062-1069
• /
• 2003

본 논문에서는 요구된 성능을 만족시키는 강인한 최적 PID 제어기 설계를 위한 새로운 루프 형성 기법을 제안 하고자 한다. 설계하고자 하는 PID 제어기의 영점들을 플랜트의 최대 극점에 근접하도록 가중치 요소 Q와 R을 선택하면 루프 형상이 고주파수 영역의 센서잡음 장벽으로부터 최대한 멀어지게 된다. 2차 시스템에 대하여 강인한 최적 PTD 제어기 설계가 가능한 새로운 루프 형성 기법은 LQR 방법에서 발전되었다.

• Smart Structures and Systems
• /
• 제6권9호
• /
• pp.991-1005
• /
• 2010

The key to detecting damage to civil engineering structures is to find an effective damage indicator. The damage indicator should promptly reveal the location of the damage and accurately identify the state of the structure. We propose to use the distance measures of low-order AR models as a novel damage indicator. The AR model has been applied to parameterize dynamical responses, typically the acceleration response. The premise of this approach is that the distance between the models, fitting the dynamical responses from damaged and undamaged structures, may be correlated with the information about the damage, including its location and severity. Distance measures have been widely used in speech recognition. However, they have rarely been applied to civil engineering structures. This research attempts to improve on the distance measures that have been studied so far. The effect of varying the data length, number of parameters, and other factors was carefully studied.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.44-51
• /
• 1998

A seismic attenuation formula is derived from the intensity maps of medium sized four earthquakes that occurred in the southern part of Korean peninsula. In order to obtain the seismic attenuation formula, the the coefficients of four attenuation equations representing the intensity maps are integrated using the proper weighting factors depending on the credibility of the data are assigned to. The proposed formula shows the trend of attenuation similar to the ones for the Eastern North America for the region within the epicentral distance of 200km, but produces higher attenuation at farther distances. Though the attenuation curve is not derived from the instrumental data, the result could be a useful tool for the analysis of seismic hazard in Korean peninsula.

• 대한인간공학회지
• /
• 제17권2호
• /
• pp.33-48
• /
• 1998

This paper illustrates the application of Fuzzy Theory and Analytic Hierarchy Process(AHP) for developing Occupational Stress Index(OSI). The purpose of the OSI development is for future prediction and problem solving of prevailing occupational stress. In developing OSI, the concept of fuzzy set theory was introduced to determine the existence and level of perceived occupational stress instead of actually measuring the strain parameters. The AHP is adopted to collect different weighting factors, since there exist various perceptions and responses to the occupational stress by different individuals. The validation study revealed that the OSI is a reliable predictor of work-related accident and illness and the physiological health of employees. Creating preventive measures, such as early detection of stress, proper placement and promotion of employees, and job enlargement will be possible by using this OSI effectively.