• The Korean Journal of Applied Statistics
• /
• v.19 no.1
• /
• pp.171-181
• /
• 2006

The Wald confidence interval has been considered as a standard method for the difference of proportions. However, the erratic behavior of the coverage probability of the Wald confidence interval is recognized in various literatures. Various alternatives have been proposed. Among them, Agresti-Caffo confidence interval has gained the reputation because of its simplicity and fairly good performance in terms of coverage probability. It is known however, that the Agresti-Caffo confidence interval is conservative. In this note, a confidence interval is developed using the weighted Polya posterior which was employed to obtain a confidence interval for the binomial proportion in Lee(2005). The resulting confidence interval is simple and effective in various respects such as the closeness of the average coverage probability to the nominal confidence level, the average expected length and the mean absolute error of the coverage probability. Practically it can be used for the interval estimation of the difference of proportions for any sample sizes and parameter values.

• Korean Journal of Remote Sensing
• /
• v.26 no.4
• /
• pp.373-385
• /
• 2010

A new method to mosaic reflectivity over the overlapped coverage of two radars was developed. The method mosaics the radar reflectivity with weights after adjustment of reflectivity differences on overlapped coverage of neighboring two radars. Their weights are inverse proportion to the difference between the height of an interpolated reflectivity and the level of CAPPI (Constant Altitude PPI). The performance of this method was compared to different mosaic methods (Mosaics by maximum value, averaged value, nearest value and distance weighted value) using the reflectivity fields of a typhoon event observed by two radar. New method was better than any other methods either as a continuity and as a bias analysis of reflectivity at the boundaries in overlapped coverage by two radars.

• Journal of Korean Neurosurgical Society
• /
• v.65 no.1
• /
• pp.22-29
• /
• 2022

Objective : Despite many advancements in endovascular treatment, the benefits of mechanical thrombectomy (MT) in patients with large infarctions remain uncertain due to hemorrhagic complications. Therefore, we aimed to investigate the efficacy and safety of recanalization via MT within 6 hours after stroke in patients with large cerebral infarction volumes (>70 mL). Methods : We retrospectively reviewed the medical data of 30 patients with large lesions on initial diffusion-weighted imaging (>70 mL) who underwent MT at our institution within 6 hours after stroke onset. Baseline data, recanalization rate, and 3-month clinical outcomes were analyzed. Successful recanalization was defined as a modified treatment in cerebral ischemia score of 2b or 3. Results : The recanalization rate was 63.3%, and symptomatic intracerebral hemorrhage occurred in six patients (20%). The proportion of patients with modified Rankin Scale (mRS) scores of 0-3 was significantly higher in the recanalization group than in the non-recanalization group (47.4% vs. 9.1%, p=0.049). The mortality rate was higher in the non-recanalization group, this difference was not significant (15.8% vs. 36.4%, p=0.372). In the analysis of 3-month clinical outcomes, only successful recanalization was significantly associated with mRS scores of 0-3 (90% vs. 50%, p=0.049). The odds ratio of recanalization for favorable outcomes (mRS 0-3) was 9.00 (95% confidence interval, 0.95-84.90; p=0.055). Conclusion : Despite the risk of symptomatic intracerebral hemorrhage, successful recanalization via MT 6 hours after stroke may improve clinical outcomes in patients with large vessel occlusion.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.3
• /
• pp.257-262
• /
• 2010

The study investigates the various Acceptance Control Charts (ACCs) based on the factors that include process independence, data weighting scheme, subgrouping, and use of control charts. USL - LSL > $6{\sigma}$ that used in the good condition processes in the ACCs are designed by considering user's perspective, producer's perspective and both perspectives. ACCs developed from the research is efficiently applied by using the simple control limit unified with APL (Acceptable Process Level), RLP (Rejectable Process Level), Type I Error $\alpha$, and Type II Error $\beta$. Sampling interval of subgroup examines i.i.d. (Identically and Independent Distributed) or auto-correlated processes. Three types of weight schemes according to the reliability of data include Shewhart, Moving Average(MA) and Exponentially Weighted Moving Average (EWMA) which are considered when designing ACCs. Two types of control charts by the purpose of improvement are also presented. Overall, $\alpha$, $\beta$ and APL for nonconforming proportion and RPL of claim proportion can be designed by practioners who emphasize productivity and claim defense cost.

• Investigative Magnetic Resonance Imaging
• /
• v.18 no.2
• /
• pp.120-132
• /
• 2014

Purpose : To compare dynamic susceptibility contrast imaging, diffusion-weighted imaging, and susceptibility-weighted imaging (SWI) for the differentiation of tumor recurrence and delayed radiation therapy (RT)-related changes in patients treated with RT for primary brain tumors. Materials and Methods: We enrolled 24 patients treated with RT for various primary brain tumors, who showed newly appearing enhancing lesions more than one year after completion of RT on follow-up MRI. The enhancing-lesions were confirmed as recurrences (n=14) or RT-changes (n=10). We calculated the mean values of normalized cerebral blood volume (nCBV), apparent diffusion coefficient (ADC), and proportion of dark signal intensity on SWI (proSWI) for the enhancing-lesions. All the values between the two groups were compared using t-test. A multivariable logistic regression model was used to determine the best predictor of differential diagnosis. The cutoff value of the best predictor obtained from receiver-operating characteristic curve analysis was applied to calculate the sensitivity, specificity, and accuracy for the diagnosis. Results: The mean nCBV value was significantly higher in the recurrence group than in the RT-change group (P=.004), and the mean proSWI was significantly lower in the recurrence group (P<.001). However, no significant difference was observed in the mean ADC values between the two groups. A multivariable logistic regression analysis showed that proSWI was the only independent variable for the differentiation; the sensitivity, specificity, and accuracy were 78.6% (11 of 14), 100% (10 of 10), and 87.5% (21 of 24), respectively. Conclusion: The proSWI was the most promising parameter for the differentiation of newly developed enhancing-lesions more than one year after RT completion in brain tumor patients.

• Journal of Preventive Medicine and Public Health
• /
• v.53 no.4
• /
• pp.266-274
• /
• 2020

Objectives: Describe out-of-pocket payment (OOP) and the proportion of Peruvian households with catastrophic health expenditure (CHE) and evaluate changes in socioeconomic inequalities in CHE between 2008 and 2017. Methods: We used data from the 2008 and 2017 National Household Surveys on Living and Poverty Conditions (ENAHO in Spanish), which are based on probabilistic stratified, multistage and independent sampling of areas. OOP was converted into constant dollars of 2017. A household with CHE was assumed when the proportion between OOP and payment capacity was ≥0.40. OOP was described by median and interquartile range while CHE was described by weighted proportions and 95% confidence intervals (CIs). To estimate the socioeconomic inequality in CHE we computed the Erreygers concentration index. Results: The median OOP reduced from 205.8 US dollars to 158.7 US dollars between 2008 and 2017. The proportion of CHE decreased from 4.9% (95% CI, 4.5 to 5.2) in 2008 to 3.7% (95% CI, 3.4 to 4.0) in 2017. Comparison of socioeconomic inequality of CHE showed no differences between 2008 and 2017, except for rural households in which CHE was less concentrated in richer households (p<0.05) and in households located on the rest of the coast, showing an increase in the concentration of CHE in richer households (p<0.05). Conclusions: Although OOP and CHE reduced between 2008 and 2017, there is still socioeconomic inequality in the burden of CHE across different subpopulations. To reverse this situation, access to health resources and health services should be promoted and guaranteed to all populations.

• Journal of Community Nutrition
• /
• v.6 no.3
• /
• pp.125-130
• /
• 2004

The purpose of this study is to investigate the relative influence of diet and physical activity on obesity. The subjects were 155 adults aged 35-52 years from 24 neighborhood committees in 4 urban districts of Beijing (male : 78, female : 77). They were divided into normal weight, overweight and obese groups according to their BMI. The general information of the subjects was collected by interview-administered questionnaire. Dietary intake was obtained by three-day(two weekdays and one weekend day) food weighted method, physical activity was assessed by a validated combination of data obtained from activity monitors, bicycling information and activity records. There were no significant differences of age, gender, height, educational, family economic level, smoking and drinking between different groups. The proportion of flour intake was higher in obese group compared to normal weight and overweight groups, and that of vegetables is lower in obese group. The physical activity (PAL) was not significantly different between two groups of the normal, overweight and obese groups. After the adjustment for confounding factors using logistic regression model, we found that the proportion of flour intake was positively associated with obesity, while the proportion of vegetable intake was inversely associated with obesity. It is concluded that dietary patterns were associated with obesity and diets composed of more vegetables and less staple combined with physical activities could contribute to obesity prevention.

• Communications for Statistical Applications and Methods
• /
• v.16 no.3
• /
• pp.501-509
• /
• 2009

Recently the interval estimation of binomial proportions is revisited in various literatures. This is mainly due to the erratic behavior of the coverage probability of the well-known Wald confidence interval. Various alternatives have been proposed. Among them, the Agresti-Coull confidence interval, the Wilson confidence interval and the Bayes confidence interval resulting from the noninformative Jefferys prior were recommended by Brown et al. (2001). However, unlike the binomial distribution case, little is known about the properties of the confidence intervals in finite population sampling. In this note, the property of confidence intervals is investigated in anile population sampling.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.2
• /
• pp.181-191
• /
• 1991

The present study determined the overall noise level and the distribution of sound pressure level over audible frequency range of noise produced at various work sites. Work-related noise greater than 80dBA produced from 98 separate work sites at 37 manufacturing companies and machine shops were analysed for the overall sound level (dBA) and frequency distribution. In addition, to determine the possible hearing loss related to work site noise, a hearing test was also conducted on 1,374 workers in these work sites. The results of the study were as follows ; 1. Of the total 98 work sites, 57 work sites(58.2%) produced noise exceeding threshold limit value (${\geq}90dBA$) set by the Ministry 01 Labor. In terms of different manufacturing industries the proportion of work sites which exceeded 90dBA was the highest for the cut-stone products industry with 6/6 work sites and lowest for the commercial printing industry with 1/13 work sites. 2. The percentage of workers who were exposed to noise greater than 90dBA was 19.8% (1,040 workers) 01 the total 5,261 workers. In terms of different industries, cut-stone products industry had the most workers exposed to noise exceeding 90dBA with 82.8%, textile bleaching and dyeing industry was next at 30.6% followed by fabricated metal products industry with 27.9%, plastic products manufacturing industry had the lowest percentage of workers exposed to 90dBA exceeding noise with 4.5%. 3. There was a statistically significant correlation between the frequency of noise-induced hearing loss and the percentage of workers exposed to noise exceeding 90dBA (P<0.05). 4. The frequency analysis of noise produced at the 98 work sites revealed that 44 work sites (44.9%) had the maximum sound pressure level at high-frequencies greater than 2KHz. In addition, significantly higher sound pressure level was detected at the high-frequencies at 90dBA exceeding work sites as compared to below 90dBA work sites (P<0.01). 5. The differences in sound level meter's A-and C-weighted sound pressure levels were analysed by frequencies. Of the 28 work sites which showed 0-1 dB difference in the two weighted sound levels, 20 work sites (71.4%) had significantly higher sound pressure levels at high-frequencies greater than 2KHz (P<0.01). Furthermore, there was a tendency for higher sound pressure levels to occur in the high-frequency range as the differences in the two weighted sound levels decreased.

• Health Policy and Management
• /
• v.23 no.2
• /
• pp.176-187
• /
• 2013

Background: In 2006 Emergency Medical Services Index (EMSI), which summarizes the performance of regional emergency medical services system, was developed. This study assesses the performance of the EMSI to help determine whether EMSI can be used as evaluation tool. Methods: To build a composite score of the EMSI from predefined 24 indicators, 3 normalized values were calculated for each indicator, the normalized values of each indicator were weighted using 4 weighting methods, and the weighted values were aggregated into the final composite score using 2 aggregation schemes. The performance of EMSI was evaluated using 3 criteria: discrimination, construct validity, and sensitivity. Discrimination was the proportion of regions that did not include the overall median rank in the 5th to 95th percentiles rank interval, which was calculated from Monte Carlo simulation. Construct validity was a correlation among the alternative EMSIs. Sensitivity of EMSIs was evaluated by total shift of quartile membership and changes of 5th to 95th percentile intervals. Results: The total discrimination performance of the EMSI was 50.0%. Correlation coefficients between EMSIs using standardized values and those using rescaled values ranged from 0.621 to 0.997. Variation of the quartile membership of regions ranged from 0.0% to 75.0%. The total change in the 5th to 95th percentile intervals ranged from -19 to +17 places. Conclusion: The results suggested that the EMSI could be used as a tool for evaluating quality of regional EMS system and for identifying the areas for quality improvement.