• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.2
• /
• pp.193-199
• /
• 1995

This study was designed to investigate the difference of time weighted average(TWA) of noise levels and noise doses by the different operating parameter settings such as exchange rate, threshold level and criterion level for noise dosimeter in the field measurements of noise at industrial working environments. The time weighted averages of noise level and noise doses for noise working environments were determined by noise dosimeter on 80 workers employed at 20 industrial establishments of 8 industries. The results obtained were as follows: 1. The mean time weighted average(TWA) of the noise working environments by the operating parameter settings showed 93.4 dB(A) in 3 dB of exchange rate, 80 dB of threshold level and 90dB of criterion level 92.0 dB(A) in 3 dB-exchange rate, 90 dB-threshold level and 90 dB-criterion level, in 90.8 dB(A) in 5 dB of exchange rate, 80 dB of threshold level and 90 dB of criterion level, and 86.7 dB(A) in 5 dB of exchange rate, 90 dB of threshold level and 90dB of criterion level. 2. ln group of noise level less than 90 dB(A), mean TWAs of 80 dB of threshold level were significantly higher than that of 90 dB of threshold level in 3 dB and 5 dB of exchange rate. 3. The case exceeded threshold limit value of noise was 49(61.3 %) in 3dB, 80dB and 90 dB setting, 44(55.0 %) in 3 dB, 90 dB, 90 dB setting, 33(41.3 %) in 5 dB, 80dB, 90 dB setting and 26(32.5%) in 5 dB, 90 dB, 90 dB setting. Above considerations in mind, it is suggested that exchange rate and threshold level be specified in related laws and regulations in the evaluation of working environments noise.

• Journal of Korea Water Resources Association
• /
• v.42 no.4
• /
• pp.297-307
• /
• 2009

For reliable water quality simulation by semi distributed model, accurate daily runoff simulation should have preceded. In this study, newly developed channel routing method which is nonlinear storage method is combination of Muskingum routing method and variable storage routing method and temporally weighted average curve number method were applied for effect analysis of water quality simulation. Developed modules, which are added in SWAT models and simulation, were conducted for the Chungju dam watershed. The simulation result by each module applied effect. As a result of analysis contribute water quality modeling, nonlinear storage method is more effective than temporally weighted average curve number method. Nutrient loading discharge was affected by development of runoff delaying from improvement of channel routing, because of characteristics of nonpoint source pollution.

• Economic and Environmental Geology
• /
• v.29 no.2
• /
• pp.183-192
• /
• 1996

Much computing time and large computer memory are needed to solve the wave equation in a large complex subsurface layer using finite difference method. The time and memory can be reduced by decreasing the number of grid per minimun wave length. However, decrease of grid may cause numerical dispersion and poor accuracy. In this study, we present 49 points weighted average method which save the computing time and memory and improve the accuracy. This method applies a new weighted average to the coordinate determined by transforming the coordinate of conventional 5 points finite difference stars to $0^{\circ}$ and $45^{\circ}$, 25 points finite differenc stars to $0^{\circ}$, $26.56^{\circ}$, $45^{\circ}$, $63.44^{\circ}$ and 49 finite difference stars to $0^{\circ}$, $18.43^{\circ}$, $33.69^{\circ}$, $45^{\circ}$, $56.30^{\circ}$, $71.56^{\circ}$. By this method, the grid points per minimum wave length can be reduced to 2.5, the computing time to $(2.5/13)^3$, and the required core memory to $(2.5/13)^4$ computing with the conventional method.

• Journal of Digital Contents Society
• /
• v.16 no.3
• /
• pp.381-388
• /
• 2015

TCP, which performs congestion control in congestion condition, is able to help a reliable transmission. However, packet loss can be increased because congestion window is increased by the time the packet is dropped in the process of congestion avoidance. In this paper, to solve the above problem, we propose a new congestion estimation based TCP congestion control scheme using the weighted average value of the RTT. After measuring a SRTT, which means the weighted average value of RTTs, at this point of time when a buffer overflow is occurred by an overloaded packet, the proposed scheme estimates the time, when the same SRTT is made in packet transmission, as a congestion time and then decreases the congestion window. The simulation results show that the proposed schem has a good performance in terms of packet loss rate and throughput when the packet loss due to buffer overflow is larger than that due to wireless channel.

• Journal of KIBIM
• /
• v.13 no.2
• /
• pp.1-15
• /
• 2023

Since the 1960s, the Korean Peninsula, which consists of 77.4 of the country's land and mountains, has seen a surge in demand for buildings due to population concentration due to urbanization and industrialization. Since then, the development of slopes has been inevitable due to the concentration and expansion of the city's population. When building a building on a slope, it is important to set the height of the surface. In this case, the means of regulating buildings in construction-related laws, such as the building closure ratio, floor area ratio, number of floors and total floor area of buildings, have an overall effect on buildings through the height of the surface. In the Korean Building Act, the setting of the height of the ground affects the calculation of the building height limit standard and the calculation of the underground floor, and it takes a long time to calculate. Therefore, the time required for attempts to change various design plans of buildings increases. The purpose of this study is to speed up the time required to calculate the weighted average of the surface when constructing buildings on slopes. In addition, the existing calculation process allows various design attempts compared to the same time given.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.196-204
• /
• 2013

In this paper, a scheduling algorithm is proposed for military satellite networks to improve QoS(Quality of Service) based on WDRR(Weighted Deficit Round Robin) method. When the packet size that has been queued to be larger, the proposed scheme DWDRR(Dynamic WDRR) method give appropriate additional quantum using EWMA(Exponentially Weighted Moving Average). To demonstrate an usefulness of proposed algorithm using OPNET modeler that built the simulation environment, reliability and real-time availability of the proposed algorithm is analyzed. The simulation results show an availability of proposed scheme in terms of reduce queuing delay and packet drop rate compared and analyzed the existing algorithms WRR(Weighted Round Robin), DRR(Deficit Round Robin) and WDRR with DWDRR.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.1
• /
• pp.43-50
• /
• 2013

This paper aims to determine the optimal location of expressway patrol vehicle stations that minimizes additional troubles caused by the delay of crash treatments. To do this, we formulate a maximum covering problem and a p-center problem weighted by crash frequency, using the shortest distance as the criteria for allocating service district, and we employ the Lagrangian relaxation algorithm to solve the former and Daskin's heuristic algorithm to solve the latter, respectively. Based on crash data of Korean expressways, the results from the proposed models are compared with the current location of patrol vehicle stations by using several indices as the level of service for crash treatment, such as maximum crash-weighted distance, average crash-weighted distance, and average access distance. The results show that the proposed models improve average access distance and time by about 10km and 10min, respectively. When allocation for service district is changed only with the fixed current location, the level of service can be also improved. The models and results proposed in this paper can contribute to improving the level of service for crash treatment on expressways. They can also provide the theoretical basis on the location decision for other various emergency facilities, and the allocation decision for floating service districts according to time-period crash data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.3A
• /
• pp.163-171
• /
• 2012

The signal model and weighted-average based estimation techniques are proposed to estimate the angle-of-arrival (AOA) parameters of multiple clusters for a low data rate ultrawide band (LR-UWB) based wireless positioning system. It is observed that the weighted-average based AOA estimation technique gives an optimal AOA estimate under few clusters condition, and the average based AOA estimation technique gives a correct AOA estimate under many clusters condition through computer simulation. Also, we can observe that the variance estimation error decreases as SNR increases, and the proposed techniques are superior to the conventional technique from the viewpoint of performance.

• Journal of Welding and Joining
• /
• v.8 no.1
• /
• pp.31-42
• /
• 1990

Arc must be stable during welding first of all other factors for obtaining sound weldment, especially in the automation of welding process. Arc stability is somewhat sophisticated phenomenon which is not clearly defined yet. In consumable electrode welding, the voltage and current variation due to metal transfer enables to assess arc stability. Recently, statistical analyses of the voltage and current waveform factors are performed to assess the degress of arc stability which is assessed and controlled by operator's own experience by now. But, considering the increasing need and the trend of automation of welding process, it is necessary to monitor arc stability in real-time. In this sutdy, the modified stability index composed of two voltage and current wvaeform factors (arc time and short circuit time) reduced from four factors (arc time, short circuit time, average arc current and average short circuit current) in Mita's index by the welding electrical circuit modeling is proposed and verified by experiments to be well estimating arc stability in the static sense. Also, the recursive calculation form estimating present arc stability in the dynamic sense is developed for real-time estimation. The results of applying the recursive index during welding show good estimation of arc stability in real-time. Therefore, the results of this study offers the mean for real-time control arc stability.

• Atmosphere
• /
• v.17 no.4
• /
• pp.327-337
• /
• 2007

In this study, we examined the new ensemble training approach to reduce the systematic error and improve prediction skill of wind by using the Short-range Ensemble prediction system (SENSE), which is the mesoscale multi-model ensemble prediction system. The SENSE has 16 ensemble members based on the MM5, WRF ARW, and WRF NMM. We evaluated the skill of surface wind prediction compared with AWS (Automatic Weather Station) observation during the summer season (June - August, 2006). At first stage, the correction of initial state for each member was performed with respect to the observed values, and the corrected members get the training stage to find out an adaptive weight function, which is formulated by Root Mean Square Vector Error (RMSVE). It was found that the optimal training period was 1-day through the experiments of sensitivity to the training interval. We obtained the weighted ensemble average which reveals smaller errors of the spatial and temporal pattern of wind speed than those of the simple ensemble average.