• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.660-667
• /
• 2018

This study examined the optimal manufacturing conditions of RDF using heat-dried sludge from sewage treatment plant in Cheonan with the oil-drying method. The amounts of oil evaporation and oil drying of the heat-dried sludge were measured at different temperatures to evaluate the value of the product. The performance of the product was then measured using a calorimeter and TGA. In addition, the concentration of odor, NH3, H2S, and TVOC during drying was determined using a portable odor-meter. Ingredient analysis was performed by EDS. Considering mass-production, the oil to heat-dried sludge weight ratio was fixed to 4:1. At $130^{\circ}C$, only physical mixing occurred after the instantaneous drying of internal water. Considering the eco-friendly aspects, there was no significant difference in the drying efficiency between $160^{\circ}C$ and $190^{\circ}C$. Therefore, the optimal conditions were a drying temperature of $160^{\circ}C$ within 5 minutes. Finally, the RDF manufactured in this study and fuel used in the thermal power plants were compared. The calorific value was 4,449kcal/kg, the water content was 2% and the ash content was 34%, which is higher than the fuel of thermal power plants. Therefore, it is believed that coal energy as well as wood pellets can be replaced.

• Journal of Nutrition and Health
• /
• v.32 no.5
• /
• pp.540-551
• /
• 1999

This study was performed to investigate the effects of dried leaf powders and ethanol extracts of Perilla frutescens(perilla leaf), Artemisia princeps var. orientalis(mugwort) and Aster scaber(chamchui) on lipid metabolism and antioxidative capacity in rats. Forty-nine male Sprague-Dawley rats weighing 105.9$\pm$1.7g were blocked into seven groups according to body weigth and raised for four weeks with diets containing 5% dried powders of perilla leaf, mugwort and chamchui, or ethanol extracts from the same amount of each dried leaf powder. Food intake was higher in the control and chamchui powder groups than the other remaining groups. Weight gain was not significantly different among all experimental groups. Food efficiency ratio was highest in the perilla leaf powder group. Plasma total lipid and cholesterol, liver total lipid and triglyceride levels were highest in the perilla leaf powder group. In contrast, dried powders of mugwort and chamchui showed hypolipidemic effects in plasma and liver. Plasma and liver TBARS levels in both dried powder and ethanol extract groups of the three plants were lower than control. There was also no significant difference between corresponding dried powder and ethanol extract groups. Catalas and GSH-Px activities in erythrocyte and liver were not different among all the experimental groups. However, SOD activities were significantly different among the esperimental groups. In erythrocyte. SOD activiteis of all dried powder and ethanol extract groups except the perilla leaf powder group were higher than control, and the chamchui power group showed the highest activity among them. In liver, all the plant groups showed higher SOD activities than control. There was no significant difference between corresponding dried powder and ethanol extract groups. In conclusion, the dried chamchui powder and liver. All the dried plant powder and ethanol extract were effective in decreasing the TBARS levels of liver and particularly plasma. Among the antiocidative enzymes, SOD activity was most responsive to the experimental diets. All the plant groups showed increases in liver SOD activities and there were more increments in dried powder groups. Since the effects of dried powder groups on lipid metabolism were better than those of extract groups, it is plausible that the high dietary fiber level in dried powders was effective. Antioxidative effects were not significantly different between corresponding dried power and extract groups, and it was thought that ethanol extracts from three plants also had similar antioxidative effects as dried powderers.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1132-1141
• /
• 1996

Heterogeneous cation exchange membrane(HCEM) was prepared with LLDPE(Linear Low Density Poly-ethylene) as binder, powdered cation exchange resins($diameter{\leq}149{\mu}m$) as ion-exchange material and glycerol as additive for electrodialysis and electrodeionization system. The weight ratio of (binder/ion exchange)/glycerol was (60%/40%)/5%, (55%/45%)/5%, (50%/50%)/5% and (40%/60%)/5%. The characterization of prepared HCEM was evaluated on mechanical, electrochemical, morphology and ion permeable properties. It was compared with commercial membrane. Electrochemical properties of HCEM of (50%/50% )/5% were very similar to value of IONPURE(commercial membrane), in which ion exchange capacity, ion transfer number and membrane resistance were to be 1.733meq/g, 0.96 and $16.08{\Omega}/cm^2$, respectively. Ion permeability of the membrane was better than that of IONPURE membrane. Compared with IONPURE membrane, the HCEM had a higher tensile strength and lower elongation and modulus, in which HCEM had tensile strength of $62.33kg/cm^2$, elongation of 87.42% and modulus of $658.53kg/cm^2$. The HCEM of (50%/50% )15% was optimum combination.

• Korean Journal of Head & Neck Oncology
• /
• v.9 no.1
• /
• pp.3-9
• /
• 1993

The benficial effects for perfusion in the preservation of free flaps have been controversial in the clinical and experimental field until now. This study was undertaken to observe the effect of UW solution. a recently developed. high molecular weight. organ perfusion solution. for protection of ischemic injury in normothermic free myocutaneous flaps. Forty rabbits were used in this sutdy. A 1x2x1cm sized gastrocnemius myocutaneous flap based on the feeding vessel from common femoral artery was made. The author set up the ischemic time for 12 hours in these flaps. The flap was washed out with normal saline(control grop, n=10), urokinase(comparative group I, n=10), UW solution before ischemic time(comparative group II, n=10) and UW solution before ischemic time and pentoxifylline before reperfusion(comparative group III, n=10). Afterthen, reperfusion was made for 12 hours. After this procedure, we checked the degree of ischemia and necrosis of myocutaneous flap by gross finding, electrical stimulation test of muscle, triphenyltetrazolium chloride staining and wet/dry weight ratio. The degree of necrosis of comparative group II and III were lesser than control and urokinase group in gross finding(p<0.05). In the electrical stimulation test of muscle, there was no statistical difference between control($1.76{\pm}1.01$) and urokinase($2.36{\pm}\1.02$) group however the muscular power of comparative group II($3.54{\pm}0.93$) and III($3.49{\pm}1.37gm/mm^2$) demonstrated significantly higher than control group(p<0.05). The ischemic findings were found in seven cases of control group and three cases of urokinase group but there were no ischemic findings in comparative group II and III in TIC stain(p<0.05). In the wet/dry weight ratio of flaps in order to evaluate the tissue edema. there was no statistical difference between control($4.55{\pm}0.29$) and III($3.75{\pm}0.48$) were scored significantly lesser than control and urokinase group (p<0.05). These results suggest that perfusion washout with UW solution improves the viability of normothermic free myocutaneous flap by inhibition of cellular swelling.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.5
• /
• pp.405-412
• /
• 1992

Growth characters of dry seeded paddy rice was studied at different levels of nitrogen(N) split application (basal : immediately after irrigation : 2 weeks after irrigation: 25 days before heading: heading stage with 10 : 20 : 30 : 20 : 20%, 20 : 30 : 20 : 20 : 10%, 30 : 40 : 0 : 20 : 10%, and 100% basal of slow release urea) in tillage and no-tillage systems. On May 17 in 1990, 6kg /10a of dry seeds of a breeding line of Milyang 95 was broadcasted and covered with a power tiller. Between tillage and no-tillage systems yield and its components, lodging related characteristics, and contents of cellulose, hemicellulose and lignin of culm base were similar. Leaf area index at heading stage was higher in tillage, but lodging index was lower compared with those in no-tillage plot. Culm length, effective tiller ratio, culm base weight, 1000-grain weight, harvest index in slow release N applied plot were higher compared with those in other N treatments. Grain yield of rice among levels of N split applications was similar in tillage, but it was higher in slow release N applied plot in no-tillage if 1kg /10a of additional N was applied as urea at panicle formation stage. At early growth stage N concentration and N uptake were lower in the slow release N applied plot, but higher after heading stage compared with other N treatments. The number of tillers was lowest in slow release N applied plot during the tillering stage, but the number of panicles per hill was similar to other N treatments.

• Geotechnical Engineering
• /
• v.14 no.6
• /
• pp.113-125
• /
• 1998

At the end of 1997 about 3 million tons of coal ash was produced as byproducts from the coal fired electrical power plants in Korea. Only about 27% of that byproducts was utilized as the admixtures of cement and concrete industry. But the large quantity of coal fired fly-ash has been used as the soil improvement materials in other countries. So the aim of this study is the estimation of the applicability of the coal fired fly-ash as microfine grouting materials by admixing the superfine particles which were separated from the coal fired fly-ash for the higher values. The 6 types of specimens were manufactured in the laboratory for the purpose of estimating the chemical and physical properties of cement and grouts. These specimens consisted of 2 specific surfaces of 6, 000 and 8, 000$cm^2$/g in Elaine method. And these specimens are devide into 3 ratios (30%, 50%, 70%) of fly-ash by weight. From the estimated properties of the coal fired fly-ash microflne cements and grouts, 50% fly-ash is the most suitable ratio for grouting materials. However, further study of durability is necessary for using fly-ash grouts practically at the field projects. The higher content of the unburned carbon of fly-ash increases the thinner layer of carbon on the surface of solution of grouts, and requires more quantity of surface active agent. As a results of this study, it is found that the microfine fly-ash is very useful as a good grouting material if 50% of fly-ash is added with the microfine portland cement. So, in the near future, if the coal fired fly-ash is able to be used as grouting material in Korea, the demand of fly-ash will increase rapidly.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.9
• /
• pp.1463-1468
• /
• 2004

This study was conducted to examine the effects of feeding diets containing bioorganic power (BP) flour, wheat flour and rice flour on blood glucose and lipid level in streptozotocin-induced diabetic rats. BP flour was composed with the mixture of defatted flour (16 g soybean, 12 g wheat, 8 g barley), 2 g red ginseng and 2 g whole wheat flour per 100 g diet. Experimental groups were divided into non-diabetic normal and 4 diabetic groups containing control, 40% BP, 41.6% wheat and 41.6% rice flours with basal diet. BP group was significantly increased body weight gain and decreased plasma glucose compared with the diabetic control, wheat and rice flour groups (p<0.05). Food efficiency ratio of diabetic rats were significantly lower than that of the normal rats. The concentrations of total cholesterol and triglyceride in plasma and atherogenic index were significantly decreased in BP, wheat and rice diabetic groups than diabetic control (p<0.05). The concentration of total cholesterol and triglyceride in liver was significantly lower in BP group as compared with the diabetic control, wheat and rice flour groups (p<0.05). In conclusion, the results indicated that BP flour feeding improved plasma glucose level, total cholesterol and triglyceride in diabetic rats.

• Journal of Bio-Environment Control
• /
• v.23 no.1
• /
• pp.43-49
• /
• 2014

This study was designed to determine the effect of red LEDs during healing and acclimatization process on the survival rate and quality of grafted tomato seedlings. Red LEDs and no light (darkness) were used for treating three rootstock cultivars, which are 'B-Blocking', 'Kanbarune', 'High-power' in healing room. Results showed that survival rates of grafted seedlings in red LEDs were higher than those in no light treatment. Significant variation on survival rates of rootstock cultivars was observed in no light treatment but there was not significant variation in red LEDs treatment. Light treatment also reduced the percentage of infected plants, except for the 'Kanbarune' cultivar. Seedling quality in red LEDs was better than that in no light treatment by improving growth parameters such as plant height, leaf length, leaf width, leaf area, fresh and dry weight of shoot and root. Light treatments and rootstock cultivars did not affect number of leaves, leaf chlorophyll value and T/R ratio of seedlings, but seedlings in red LEDs were significantly more compact than those in no light treatment. Moreover, the root morphology of seedlings such as total root surface area, total root length, and number of toot tips in red LEDs was also greater than that in no light treatment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.3
• /
• pp.278-284
• /
• 1995

This experiment was performed to characterize the optimum water table level for the grain quality, seed germination and diastic power of barley(var. Olbori) and wheat(var. Grumil). Olbori and Grumil grew in the 550 liter plastic pot that filled with silt loam or sandy loam. During the whole growth period, the underground water level adjusted to be 20, 30, 40, 50 and 70cm. Filled grain ratio and specific gravity were not affected by soil texture and water table. Low level of water table caused the increase of 1,000 grain weight in wheat and barley, but soil texture didn't. Crude protein content tended to be high as the water table level was high, especially in wheat. Change in crude protein content was affected by underground water level more than soil texture. And the affection was slightly higher in sandy loam than silt loam, but the difference was small. The higher level of water table led to the lower crude lipid content in barley and wheat grain. Crude lipid content of both wheat and barley grain grown in sandy loam was higher than those grown in silt loam. As the water table level down, the ash content of barley and wheat grain tend to increase, especially in sandy loam. Wheat flour yield was not affected by soil texture. It was about 65% at 20cm of water level and above 67% at 40cm water level. The seed germination of wheat and barley was more than 95% when the seeds were placed at 2$0^{\circ}C$ for three days. Regardless of soil texture, the lowest germination was seen at 20cm of water table level. And the seed germination rate increased as the underground water level became low. Above 89% of barley grains were germinated within 48 hours except 20cm level of water table in sandy loam. Diastic power of germinated barley was the lowest at 20cm of water table level, and it was almost unchanged below 30cm of water table level. And also it was not affected by soil texture.

• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.180-187
• /
• 2022

In order to select suitable light in a plant factory, electric energy use efficiency and light use efficiency should be considered simultaneously to consider operating costs as well as quantitative and functional aspects. The growth characteristics, electric energy use efficiency, light use efficiency by light intensity, LED ratio, and photoperiod conditions were compared together. Light intensity is 60, 130, 230, and 320 µmol·m^-2·s^-1 treatments, and light quality is the mixing ratio of red light and blue light 8:2, 6:4, 4:6, and 2:8 treatments. Photoperiod is 9, 12, 15, and 18 hours treatments based on the daytime. In the light intensity experiment, the growth rate increased as the light intensity increased, but there was no significant difference in the light use efficiency. When comparing the leaf fresh weight per power consumption, only the 320 µmol·m^-2·s^-1 treatment group showed significantly low efficiency, and there was no significant difference in the other treatments, so 230 µmol·m^-2·s^-1, which produced the most, was the most efficient. In the light quality experiment, the ratio of red light and blue light was measured to be high at the same time as the growth rate and light use efficiency in RB 8:2, and there was no significant difference in color difference and flavonoids content, so a Red:Blue ratio of 8:2 was the most suitable condition. In the photoperiod experiment, the longer the photoperiod, the higher the growth rate. However, there was no significant difference in the growth rate over 12 hours of daytime, so 12 hours considering the light consumption efficiency was a suitable condition. Based on the above results, LED light environmental conditions for perilla growth in plant factories were light intensity, light quality, and day length of 230 µmol·m^-2·s^-1 or more, 8:2, and 12 hours or more, respectively.