• 한국정밀공학회지
• /
• 제27권1호
• /
• pp.58-63
• /
• 2010

A new contact force estimation technique is proposed. Keeping the contact force at a certain level between finishing tool and the object is essential since the quality of the finished surface is very sensitive to the contact force during the finishing process. However, the contact force measurement cannot be obtained by simply installing load cells under machine table or in the middle of tool linkage. The reason is that the weight of the machine table and the tool linkage are much heavier than the force to be measured. To that end, a method for estimating disturbance is proposed for a system that is similar to the mechanism of the finishing machine, and the same method is applied to estimate the contact force of the brush-type finishing machine. To verify the effectiveness of the proposed method, a small scale test set-up has been built and the method has been tested.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.160-167
• /
• 2004

The correlation between the object function and the design parameter is shown on this paper by using the characteristic function for the mixed result of the structural analysis, the buckling analysis and the table of orthogonal array according to the original overhead crane's dimensional change. About the above two functions, the effectiveness of design change according to the change of design parameters could be estimated. Also, the overhead crane's weight is reduced up to 10.55 percent maintaining the structural stability according to the thickness of plate.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권2호
• /
• pp.12-17
• /
• 2006

This study uses a characteristic function to explain correlations between the objective function and design variables. For the use, structural analysis and buckling analysis are carried out. the dimensional change of an original overhead crane is made based on the table of orthogonal array. For two functions or more, the effectiveness of design change can be evaluated in accordance with change in design parameters. Also, the overhead crane's weight is reduced by up to 10.55 percent while its structural stability maintained.

• Journal of Nutrition and Health
• /
• 제1권1호
• /
• pp.49-51
• /
• 1968

The Calorie allowances for a reference man (25 years, 60kg, moderate work) and a reference woman (25 years, 52kg, moderate work) were given by the formulae which were recommended by the Food and Agricultural Organization(FAO). E=152 W 0.73 3,000 Calories(man) E=123.4 W 0.73 2,200 Calories (woman) The appropriate adjustments were made for age, body weight (Table 1) and activity (Table 2) of adults other than a 'reference man' and 'reference woman' based on our report of 'Studies of Basal Metabolism and Energy Expenditure of Koreans in Daily Life' supported partly by the U.S. Department of Agriculture. The recommendation of FAO for the calorie requirements for children, the additional allowances for pregnancy, lactation and environmental temperature were adopted.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.28-29
• /
• 2017

Recently, the tendency of the insulation of buildings to be important is making the buildings airtight. However, in order to get closer to the technology, it is necessary to improve the performance of walls and panels of buildings, but it is a problem due to the increase of the unit price. We will review the basic data on the density and table flow characteristics of high thermal insulation materials.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.1035-1040
• /
• 2002

Railway plate girder bridges have characteristics that are not show dominant frequency in dynamic response frequencies like obtained vertical acceleration on the bridge during the train passing because the train loading relatively bigger than the bridge self-weight. This paper experimentally confirmed in FFT result has various frequencies due to inherent characteristic of railway train loading. To establish classification of dynamic frequency range in railway bridge acceleration during the train passing, vibration frequencies result from experimental test are analyzed concerning actuation vibration factors. Factors are train velocity, train type, mass ratio of vehicle/bridge, stiffness of bridge, bridge/track and vehicle/track. From the result, it is proposed that the frequencty classfication table with corresponding factors. Using the proposed table to develop rehabilitation technique of the plate girder bridge, to expect vibration reduction and comfort enhancement of the railway plate girder bridge.

• 대한가정학회지
• /
• 제20권4호
• /
• pp.45-52
• /
• 1982

This research is aimed at establishing nominal sizes for the clothes manufacturers by using the results from a comprehensive study with 6~9 year-old girls. From the results of the data analysis, we found the following points: 1) The stature and the weight, which have strong correlations with each part of the body, are selected as the independent variables. 2) The frequency-distribution was calculated from the variable quantities(Table 1~5). 3) The nominal size for the jacket, blouse, skirt, and trousers was estimated by the frequency-distribution(Table 6~9). 4) A multiple linear regression model to estimate the 18 items was formulated.

• 한국수산과학회지
• /
• 제3권3호
• /
• pp.172-176
• /
• 1970

This research dealt with the nutrient value of the seaweed, Sargessum horneri (Turner) C. Ag. which showed the highest nutrient value in the previous exporiment (Park 1968). Its objective was to find the most effective mixing ratio of ordinary chicken feed used for pullet. In order to investigate the most effective mixing ratio, seven kinds of sample feed with vary-ing amounts of the seaweed as shown in table 2 were prepared and were fed to seven groups of chickens, each group consisting of twenty, four week old, pullets. In addition, the effect of sodium glutaminate mixed in the feed was also investigated, and the following result was obtained. The average increase in body weight of each group during the experiment period was determined. The group fed with the feed containing $10\%$ powdered Sargassum horneri (Turner) C. Ag. showed the highest body weight increase. In this experiment the body weight increase was accelerated by mixing $0.5\%$ sodium glutaminate In the above feed.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.447-453
• /
• 2008

It is decidedly important to ensure QoS(Quality of Service) in order to make it possible a variety of multi-media services and realtime contents services in Wireless networks. One of methods to offer these services is the advanced prediction of Handoff through terminal's directional. In this paper, it is applied that the AP weight for the ground information of peripheral cell and the weight value of history table for the cell frequently visited. Also, it is expected that will be guarant QoS of substantial data in the case of Handoff through exact directional prediction of the next cell by using Kalman Filter algorithm applied GPS coordinates value.

• 한국IT서비스학회지
• /
• 제8권1호
• /
• pp.113-124
• /
• 2009

Value-based requirements engineering process, called The ViRE(Value-Innovative Requirement Engineering) was suggested to create an uncontested market using ERRC(Eliminate, Reduce, Raise, Create) requirements analysis. But ViRE did not provides a quantitative data analysis method for ERRC decision so as to make objective decisions for customers. In this paper, to solve this problem, we suggest a quantitative ERRC analysis method by estimating requirements cost. Our method defines user requirements and decides their weight. Then, it makes quality level table for all the identified requirements and function modules and estimate implementation cost based on their quality levels. Finally, assess each requirement's impact and then evaluate ERRC value. We could get the more objective ERRC values by evaluate the requirement weight. functional module weight, and implementation cost. And we proved the efficiency of our model by a case study, smart student ID system.