• 수산해양교육연구
• /
• 제28권4호
• /
• pp.893-902
• /
• 2016

The purpose of this study is to investigate the effect of wearing a weightlifting belt, which is an auxiliary equipment used during squat, by measuring and analyzing biomechanical difference in lower limb and proposing safer and to suggest a more effective exercise method for general population. Selected 8 male participants in their 20s who have not performed regular resistance exercise for at least a year, but have experience of performing squat. The comprehensive method of study is as follows: subjects were notified of the purpose of the study and were told to practice warm-up and the squat motion for the experiment for 20 minutes. When the participant believed they were ready to begin, the experiment was started. At controlled points, foot pressure distribution sensor has been installed. Then left and right feet have been placed on the pressure distribution sensor, from which data for successful squat position that does not satisfy the criteria for failure have been collected and computed with Kwon3D XP program and TPScan program. For data processing of this study, SPSS 21.0 was used to calculated mean (M) and standard deviation (SD) of the analyzed values, and paired t-test has been conducted to investigate the difference before and after wearing the weightlifting belt, with p-value of ${\alpha}<.05$. As for time consumed depending on usage of weightlifting belt in squat, statistically significant difference has been found in P2, which is recovery movement. Lower limb angle depending on usage of weightlifting belt in squat has shown statistically significant difference in E1 foot joint(p<. 001). There has been statistically significant difference in E2 knee joint. Foot pressure percentage depending on usage of weightlifting belt in squat were found to be statistically significant (p<. 01) in both regions of anterior and posterior foot.

• 한국가스학회지
• /
• 제20권5호
• /
• pp.104-111
• /
• 2016

최근 화학물질을 사용하는 시설이 증가하면서 동시에 시설의 노후화, 기계적 결함, 인적오류 등으로 화학물질 누출사고 피해가 많아지고 있다. 특히, 산업단지는 군집 특성으로 인해 화학물질 누출사고 발생 시 인근 사업장으로 확산되어 큰 피해로 이어질 가능성이 크다. 이에 따라 화학물질을 취급하는 공정의 누출조건, 환경조건을 반영한 다양한 누출 시나리오를 토대로 빠른 감지와 대응을 위해 경계면의 센서배치 방안을 제시할 필요가 있다. 따라서 본 연구에서는 염소가스가 누출되는 경우에 대해 COMSOL를 사용하여 주요 매개변수의 적용으로 실질적인 사고 시나리오를 해석하였다. 그리고 사고 시나리오를 바탕으로, 센서의 감지 확률과 감지시간 등 각 항목마다 중요도를 부여하여 최적 위치가 산출되도록 목적함수를 선정하였다. 또한 예상치 못한 지역의 누출사고에 대해 최적화된 센서배치의 강건성 분석을 통해 본 방안의 타당성을 높였다. 결과적으로, 기존 방식보다 효과적으로 경계면의 센서배치 최적화 방법의 적용 가능성을 확인하였다. 이상의 결과로 부터 이동식 센서의 배치방법과 농도 데이터를 기반으로, 누출원의 역추적에 도움을 줄 수 있을 것으로 기대한다.

• 한국산학기술학회논문지
• /
• 제17권6호
• /
• pp.1-8
• /
• 2016

오늘날 전류센서는 전류량 제어, 감시, 계측 등 매우 다양한 분야에서 사용되고 있다. 또한 전력망의 스마트 그리드사업, 신재생에너지 발전, 전기자동차와 하이브리드 자동차 등의 수요가 커지면서 그 사용영역이 점차 확대되고 있는 추세이다. 여러 종류의 전류센서 중에서 홀 소자를 사용하는 개방형 전류센서는 다른 형식의 전류센서에 비해 가격이 싸고, 크기와 무게가 작은 장점이 있지만 정밀도가 낮고 주위의 온도 변화에 따라 특성이 변하는 것이 단점이다. 이러한 단점을 보완하기 위하여 본 연구에서는 정밀도와 온도성능이 뛰어난 300A급 개방형 전류센서를 설계 및 제작하였다. 300A급 개방형 전류센서를 제작하기 위해서 수치해석을 통해 철심을 설계하고 회로해석 프로그램을 이용하여 신호처리에 필요한 회로들을 설계하였다. 이러한 과정을 통해서 SMD(Surface Mount Device) 형태로 제작된 300A급 개방형 전류센서는 30 ~ 300A의 직류 및 교류전류를 통전한 실험에서 정밀도 오차가 0.75% 이내, 선형도 오차가 0.19% 이내였다. 또한 온도보상회로를 포함한 전류센서를 $-25{\sim}85^{\circ}C$의 온도범위에서 동작시켰을 때 온도계수는 $0.012%/^{\circ}C$ 이내였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권1호
• /
• pp.149-156
• /
• 2016

In this experiment, we proposed and implemented a disease forecasting system using a received signal strength indication ZigBee-based wireless network with a 3-axis acceleration sensor to detect illness at an early stage by monitoring movement of experimentally infected weaned piglets. Twenty seven piglets were divided into control, Salmonella enteritidis (SE) infection, and Escherichia coli (EC) infection group, and their movements were monitored for five days using wireless sensor nodes on their backs. Data generated showed the 3-axis movement of piglets (X-axis: left and right direction, Y-axis: anteroposterior direction, and Z-axis: up and down direction) at five different time periods. Piglets in both infected groups had lower weight gain and feed intake, as well as higher feed conversion ratios than the control group (p<0.05). Infection with SE and EC resulted in reduced body temperature of the piglets at day 2, 4, and 5 (p<0.05). The early morning X-axis movement did not differ between groups; however, the Y-axis movement was higher in the EC group (day 1 and 2), and the Z-axis movement was higher in the EC (day 1) and SE group (day 4) during different experimental periods (p<0.05). The morning X and Y-axis movement did not differ between treatment groups. However, the Z-axis movement was higher in both infected groups at day 1 and lower at day 4 compared to the control (p<0.05). The midday X-axis movement was significantly lower in both infected groups (day 4 and 5) compared to the control (p<0.05), whereas the Y-axis movement did not differ. The Z-axis movement was highest in the SE group at day 1 and 2 and lower at day 4 and 5 (p<0.05). Evening X-axis movement was highest in the control group throughout the experimental period. During day 1 and 2, the Z-axis movement was higher in both of the infected groups; whereas it was lower in the SE group during day 3 and 4 (p<0.05). During day 1 and 2, the night X-axis movement was lower and the Z-axis movement was higher in the infected piglets (p<0.05). Overall, the movement of infected piglets was altered, and the acceleration sensor could be successfully employed for monitoring pig activity.

• 융합보안논문지
• /
• 제12권1호
• /
• pp.43-48
• /
• 2012

본 논문에서는 u-Eco(ubiquitous ecological) City에서의 정보보호 정책을 제시한다. 이를 위하여 먼저, 다양한 유비쿼터스 도시의 정의를 살펴보고 u-Eco City의 개념, 주요 서비스 및 추진 과제를 정리한다. 그리고 유비쿼터스 서비스를 제공하기 위해 중추적인 역할을 수행하는 통합운영센터의 프레임워크를 제시하고, 센터에서의 개인정보 및 사생활 보호, 데이터 보호, 망설비 보호와 관련된 요구사항을 분석한다. 기존 정보보호 알고리즘과 달리 u-Eco City에서 운영되는 USN(ubiquitous sensor network)에서 정보의 수집, 가공 및 제공시 경량화된 암호화 알고리즘을 이용한 정보보호 기술(블록/스트림 암호화, 의사난수 생성기, 해쉬함수 및 공개키 암호화 등)이 요구되며 개인정보의 기밀성과 인증성을 보장해주기 위한 정책이 사전에 마련되어야 함을 알 수 있다.

• 패션비즈니스
• /
• 제10권1호
• /
• pp.31-40
• /
• 2006

We studied relation between the clothing pressure applied by types of brassiere, postures, feeling of tightness. The main results were summerized as follows; 1. The research subjects of this study were 9 who rate of body fat was borderline and degree of fatness was normal. As a result of clothing pressure, the most prefered value was $36.86g/cm^2$ on sensor 2 in standing position and the next was $34.76g/cm^2$ on sitting position. Furthermore, The maximum value of sensor 2 was $59.08g/cm^2$ (in standing), $57.93g/cm^2$ (in sitting). On the other hand, The average clothing pressure of bra C type was $23.67g/cm^2$ 2. The study of feeling of tightness applied by bra type was high in order of C

• Food Science and Biotechnology
• /
• 제17권5호
• /
• pp.1038-1046
• /
• 2008

This study was carried out to develop a small-sized biosensor based on surface plasmon resonance (SPR) for the rapid identification of insecticide residues for food safety. The SPR biosensor module consists of a single 770 nm-light emitting diodes (LED) light source, several optical lenses for transferring light, a hemisphere sensor chip, photo detector, A/D converter, power source, and software for signal processing using a computer. Except for the computer, the size and weight of the sensor module are 150 (L)$\times$70 (W)$\times$120 (H) mm and 828 g, respectively. Validation and application procedures were designed to assess refractive index analysis, affinity properties, sensitivity, linearity, limits of detection, and robustness which includes an analysis of baseline stability and reproducibility of ligand immobilization using carbamate (carbofuran and carbaryl) and organophosphate (cadusafos, ethoprofos, and chlorpyrifos) insecticide residues. With direct binding analysis, insecticide residues were detected at less than the minimum 0.01 ppm and analyzed in less than 100 sec with a good linear relationship. Based on these results, we find that the binding interaction with active target groups in enzymes using the miniaturized SPR biosensor could detect low concentrations which satisfy the maximum residue limits for pesticide tolerance in Korea, Japan, and the USA.

• Journal of Welding and Joining
• /
• 제14권1호
• /
• pp.99-106
• /
• 1996

Development of an automatic TIG welding system incorporating a vision sensor and torch control mechanism leads to an improved welding quality and greater production efficiency. The automatic welding system should be greatly restricted in its size and weight for the LNG(Liquefied Natural Gas) storage tank and also provide a unique torch rotating mechanism which keeps the torch tip in the constant position while the angle is changed continuously to maintain the welding torch substantially perpendicular to the weld line. The developed system is driven by two translation axes X, Z and one rotational axis. A moving line window method is adopted to the image recognition of the corrugated membranes with specular reflection. This method decides original laser stripe patterns in image which is affected by multi-reflection. A self-teaching algorithm, which guides the automatic welding machine with the information provided by the CCD camera without any previous learning of a reference trajectory, was developed for tracking the corrugated membrane of the LNG tank along the weld line.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.464-473
• /
• 2006

This paper summarises theoretical and experimental work on the feedback control of sound radiation from honeycomb panels using piezoceramic actuators. It is motivated by the problem of sound transmission in aircraft, specifically the active control of trim panels. Trim panels are generally honeycomb structures designed to meet the design requirement of low weight and high stiffness. They are resiliently-mounted to the fuselage for the passive reduction of noise transmission. Local coupling of the closely-spaced sensor and actuator was observed experimentally and modelled using a single degree of freedom system. The effect of the local coupling was to roll-off the response between the actuator and sensor at high frequencies, so that a feedback control system can have high gain margins. Unfortunately, only relatively poor global performance is then achieved because of localisation of reduction around the actuator. This localisation prompts the investigation of a multichannel active control system. Globalised reduction was predicted using a model of 12 channel direct velocity feedback control. The multichannel system, however, does not appear to yield a significant improvement in the performance because of decreased gain margin.

• 한국군사과학기술학회지
• /
• 제6권4호
• /
• pp.22-28
• /
• 2003

In the conventional weapon system, such as gun and small arms, it Is a general trend that for maximization of its performance and enhancement of its effectiveness, the firing control system(FCS) is developed and applied with the guns and small arms in the world. The FCS of the small arms for infantry man is composed of a few of sensors for acquisition of input data of FCS, such as range measurement, position sensing of weapon, temperature, etc., computer, displayer and power pack, and also the air burst munition is developed in parallel for the maximization of FCS's effectiveness. Since the flight time setting fuze for the air burst munition is adapted for next me, the measuring device of the muzzle velocity is needed to overcome the variation of muzzle velocity due to producing procedures and the differences of the using temperatures and so maintain the burst position accuracy This paper contained the technical information on the development of the measuring device of muzzle velocity, which designed in compact & light weight configuration with reliability and accuracy.