• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.3
• /
• pp.20-28
• /
• 2000

Air wiping technique is widely used because of easy and efficient coating control in present CGL The coating weight is controlled by nozzle header pressure. strip line speed, and the distance between strip and nozzle. Coating defects are resulted from the unbalance of these control factors and the inaccuracy of coating equipments. We investigates the main cause of coating defects, such as edge overcoating and coating deviation through various experiments. It is found that the edge overcoating is mainly come from nozzle lip type, and the coating deviation is caused by the unbalance of dynamic pressure.

• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.1
• /
• pp.39-44
• /
• 2000

This study was carried out to obtain the basic information about the sucker producing characteristics of certain burley tobacco varieties(Nicotiana tabacum L. var. burley) at Suwon and Chonju Experiment Station, Korea Ginseng & Tobacco Research Institute in 1999. The number and weight of suckers for 12 varieties or breeding lines were investigated three times, 45 days after transplanting for ground sucker, 10 days after topping, and 10 days after maleic hydrazide(MH) applying for upstalk sucker. KB 103 and KB 9416-1 produced less ground suckers and upstalk suckers than other entries did. KB 9210-8 produced less ground suckers and (Male sterile TC 612 x KB 108)F$_1$ also produced less upstalk suckers than other entries did. There was no differences among entries in sucker production at 10 days after MH treatment. Between the weight of total sucker and days to flower revealed the negative correlation, but not significant. The low sucker producing entries described above could be used as a parental line in the breeding program for the low sucker producing variety.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.50-56
• /
• 2014

In this paper, we proposed a Ku-band antenna that can be mounted on UAV. A proposed antenna structure has small size and light weight. It is considered long distance communication environment(LOS) and equipped UAV. Proposed antenna is designed $16{\times}2$ aperture coupled microstrip patch array antenna for high gain characteristics. In the measurement results, VSWR is less than 1.5 and the gain is over 21dBi in the bandwidth. Mechanical specifications of antenna assembly are ${\phi}250{\times}200mm$ of size and 3kg of weight.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.263-266
• /
• 1996

A method to determine an optimal temperature trajectory that guarantees polymer products having controlled molecular weight distribution and desired values of molecular weight is presented. The coordinate transformation method and the optimal control theory are applied to a batch PMMA polymerization system to calculate the optimal temperature trajectory. Coordinate transformation method converts the original fixed-end-point, free-end-time problem to a free-end-point, fixed-end-time problem. The idea is that by making the reactor temperature track the optimal temperature trajectory one may be able to produce polymer products having the prespecified physical property in a minimum time. The on-line control experiments with the PID control algorithm have been conducted to establish the validity of the scheme proposed in this study. The experimental results show that prespecified polymer product could be obtained with tracking the calculated optimal temperature trajectory.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.42-45
• /
• 2002

In this paper, multiphase optimization of machine Tool structure is presented. The final goal is to obtain 1) light weight, 2) statically and dynamically rigid. and 3) thermally stable structure. The entire optimization process is carried out in three phases. In the first phase, multiple static optimization problem with two objective functions is treated using Pareto genetic algorithm. where two objective functions are weight of the structure and static compliance. In the second phase, maximum receptance is minimized using simple genetic algorithm. And the last phase, thermal deflection to moving heat sources is analyzed using Predictor-Corrector Method. The method is applied to a high speed line center design which takes the shape of back-column structure.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.252-254
• /
• 2003

Recently composite insulators are being used for outdoor high voltage applications. Composite insulators for transmission line have significant advantages over porcelain insulators, especially for ultra-high voltage. Their advantages are light weight, vandalism resistance, and hydrophobicity. We developed a 170kV high reliable vertical break disconnector with good long term electrical and mechanical performance which was achieved by the improvement of electrical performance and light weight. We discuss the outline of the development and the product.

• Journal of Ocean Engineering and Technology
• /
• v.3 no.2
• /
• pp.26-34
• /
• 1989

심해에서 사용되는 계류선의 큰 자중(self-weight)에 관련된 문제를 해결하기 위하여 케이블-부표 시스템을 이용하는 것은 매우 큰 도움이 된다. 계류선에 적절한 중간잠수부표(intermediate submerged buoys)를 붙임으로써 계류선에 발생하는 최대 장력을 줄일 수 있고, 따라서 케이블의 직경을 감소시킬 수 있다. 본 논문에서는 중간잠수부표가 부착된 케이블의 비선형 정적 방정식과 선형화된 운동방정식이 유도되고, 주파수 영역해석을 이용하여 케이블의 고유진동수와 케이블 상단에서의 장력을 구하고 그것들에 대한 중간잠수부표의 영향을 조사한다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.4 s.44
• /
• pp.349-355
• /
• 1992

Comfortable sleeping largely depends on human mental state, physical condition, the temper. ature and humidity in bedrooms, and qualities of quilt and bedcover. Of the qualities of quilt, thermal insulation effect plays the most important role in keeping bedroom in ample temperature and preventing human body from giving off heat. In the present study, which is a sequel study to research on the thermal insulation effect, the real-size quilts with the following items of filling materials in them are designed to research on the variation of each item, and to measure the effect of the weight variation in inner covers on the thermal insulation effect of quilts, the results are as follows: 1. The coefficient between the weight of filling materials and the thermal insulation effect of quilt is shown to be a significant $0.91\~0.97$. 2. The thermal insulation effect of the quilts with in size of $0.5\;Kg/m^{2}$ is surveyed to be high in order down > polyester > cotton > wool. 3. The effect of the texture of inner covers on the thermal insulation effect of quilt is shown to be ignorably low. 4. The weight of filling materials is shown to be in correlation with the thermal insulation effect of quilts, and the estimated regression line has been obtained.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.78-86
• /
• 2019

Recently, IoT researches using sensor data based on embedded networks in various fields including healthcare and sports have been continuously attempted. This study analyzes golf ball mobility to support IoT application in golf sports field. Generally, since the difference in density occurs due to the condition of the inner material and the abnormal state at the time of the outer skin joining during the manufacturing of the golf ball, the weight of each subset is equal for any two points with the same radius in the sphere cannot be guaranteed. For this reason, the deflected weight of the sphere has the undesirable effect of hitting the ball in a direction in which the weight of the ball is heavy. In this study, it is assumed that there is a unique center of gravity of the ball, and even if the golf ball cannot be manufactured perfectly, it wants to establish the basic principle to accurately recognize or mark the putting line based on the center of gravity. In addition, it is evaluated how the mobility of the golf ball with a deviation from the center of gravity of the golf ball affects the progress path (or movement direction) and the moving distance (or carry distance) after the golfer hits. The basic model of the mobility of the golf ball can help the golfer exercise model and the correlation analysis. The basic model of the mobility of the golf ball can help the golfer exercise model and the correlation analysis.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.2
• /
• pp.220-225
• /
• 2002

To determine the anti-stress effect of KCG(加味天麻鉤藤飮) extract on sprague-dawley rats. we conducted a research about the change of weight, activity, reactivity, c-fos protein, cytotoxicity against PC12 cell line and heal shock protein. 1) KCG extract siginificantly inhibited the decrease of body weight induced by stress, compared with the control group. 2) KCG extract had no siginificant effect in the activity and reactivity of rats between the control and the experimental groups. 3) KCG extract siginificantly restrained c-fos protein manifestation, compared with the control group. 4) KCG extract siginificantly restrained heat shock protein, compared with the control group. These results suggested that KCG might be usefully anti-stress effect.