• Korean Journal of Veterinary Research
• /
• v.33 no.3
• /
• pp.525-530
• /
• 1993

Studies were conducted in 13 Korean native heifers to determine the puberty based on plasma progesterone profiles and estrus observations. Blood samples for determination of progesterone profiles were collected from jugular vein twice a week from 8 to 24 months of age, and all heifers werce observed for estrous behaviours twice a day. Heifers attained puberty at 11.3 months of age and 188.5kg body weight as determined by progesterone profiles, whereas the first estrous behaviours were observed at 14.2 months of age and 215.4kg body weight. This result indicates that determination of plasma progesterone profiles could be utilized for monitoring the puberty in Korean native heifers, and one or more ovulations occurred before pubertal heifers showed overt estrous behaviours.

• Bulletin of the Korean Chemical Society
• /
• v.4 no.5
• /
• pp.217-219
• /
• 1983

A precise EDTA titrimetric method involving a weight titration of major portion with solid reagent followed by titration of the remainder with a very dilute standard solution has been developed for the determination of bismuth. When the end point is determined by means of amperometry with a rotating mercury electrode, the error in bismuth analysis is less than 0.01 % even when $Pb^{2+}$, $Zn^{2+}$, or $Cd^{2+}$ is present. However, copper interferes appreciably and masking with thiourea gives too low results.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.23 no.1
• /
• pp.86-102
• /
• 1981

The soil test data of 28 earth dams, scheduled to be constructed in Kore3, were selected for this study. The safety factors of their side slops were computed using Fellenius' "slice Method" by computer. The results summarized in this study are as follows; 1. Dam sections can be easily determined by fig.10 without a time consuming trial and error calculations of assumed sections. 2. For the economical design of earth dam sections, it was found that more cohesive soil was suitable for lower dams(dam height less than 25m) and soils with a higher friction angle was better for higher dams 3. In the case that used soil materials have the same Internal friction angle, side slope increase was almost same. 4. The relationship between side slope and friction angle was found as log.S=a tan ø+b (Fig. 7) 5. The relationship between side slope and cohesion (c) was also found as log. S=a c+b (Fig. 8) 6. The change of safety factors due to the change of central core materials was very little (Table-2) 7. The decrease of safety factors according to the unit weight increase of embankment materials was negligible. 8. In general the relationship between the wet unit weight and the saturated unit weight was r sat = (rt)$^2$+0. 140. This study will contribute to the determination of economic and safe planning and designing of earth dams, embankments and cutting side slopes.

• Journal of Animal Science and Technology
• /
• v.64 no.1
• /
• pp.155-165
• /
• 2022

As pork consumption increases, rapid and accurate determination of porcine carcass grades at abattoirs has become important. Non-destructive, automated inspection methods have improved slaughter efficiency in abattoirs. Furthermore, the development of a calibration equation suitable for non-destructive inspection of domestic pig breeds may lead to rapid determination of pig carcass and more objective pork grading judgement. In order to increase the efficiency of pig slaughter, the correct estimation of the automated-method that can accommodate the existing pig carcass judgement should be made. In this study, the previously developed calibration equation was verified to confirm whether the estimated traits accord with the actual measured traits of pig carcass. A total of 1,069,019 pigs, to which the developed calibration equation, was applied were used in the study and the optimal estimated regression equation for actual measured two traits (backfat thickness and hot carcass weight) was proposed using the estimated traits. The accuracy of backfat thickness and hot carcass weight traits in the estimated regression models through stepwise regression analysis was 0.840 (R²) and 0.980 (R²), respectively. By comparing the actually measured traits with the estimated traits, we proposed optimal estimated regression equation for the two measured traits, which we expect will be a cornerstone for the Korean porcine carcass grading system.

• Korean Journal of Veterinary Service
• /
• v.39 no.1
• /
• pp.7-12
• /
• 2016

The Autofom is a equipment for predicting the amount of pig carcasses meat using the 16 ultrasonic sensors to measure in real time and it was established in Dodram LPC in Gyeonggi Province of Korea for the first time. This study was carried out to validate the reliability of Autofom statistically and to establish guideline for developing a analytic formula through comparing the measurement between Autofom and dissection. The ham parts of sixty-six pig carcasses were measured with Autofom and by two experimental performers. The weight means and standard deviations of ham parts including bone by measurements with Autofom and dissection were $10.69{\pm}0.81kg$ and $10.77{\pm}0.94kg$, respectively a strong positive correlation (P<0.01) was identified, with a coefficient of determination ($R^2$) of 0.82. The weight means and standard deviations of lean ham parts by measurements with Autofom and dissection were $7.41{\pm}0.58kg$ and $7.42{\pm}0.89kg$, respectively a strong positive correlation (P<0.01) was identified, with a coefficient of determination ($R^2$) of 0.72. The root mean square errors of two groups were 0.40 and 0.50, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.3
• /
• pp.378-385
• /
• 2013

The aim of this study was to examine the effect of variety and growing conditions of wheat on broiler performance and nutrient digestibility. One hundred and sixty-four wheat samples, collected from a wide range of different sources, locations, varieties and years, were analyzed for a range of chemical and physical parameters. Chemical and physical parameters measured included specific weight, thousand grain weight (TG), in vitro viscosity, gross energy, N, NDF, starch, total and soluble non-starch polysaccharides (NSP), lysine, threonine, amylose, hardness, rate of starch digestion and protein profiles. Ninety-four of the wheat samples were selected for inclusion in four bird trials. Birds were housed in individual wire metabolizm cages from 7 to 28 d and offered water and feed ad libitum. Dry matter intake (DMI), live weight gain (LWG) and gain:feed were determined weekly. A balance collection was carried out from 14 to 21 d for determination of apparent metabolizable energy (AME), ME:gain, DM retention, oil and NDF digestibility. At 28 d the birds were sacrificed, the contents of the jejunum removed for determination of in vivo viscosity and the contents of the ileum removed for determination of ileal DM, starch and protein digestibility. The wheat samples used in the study had wide-ranging chemical and physical parameters, leading to bird DMI, LWG, gain:feed, ME:GE, AME content and ileal starch and protein digestibility being significantly (p<0.05) affected by wheat sample. A high level of N fertilizer application to the English and NI wheat samples tended to benefit bird performance, with increases of up to 3.4, 7.2 and 3.8% in DMI, LWG and gain:feed, respectively. Fungicide application also appeared to have a positive effect on bird performance, with fungicide treated (+F) wheat increasing bird DMI, LWG and gain:feed by 6.6, 9.3 and 2.7%, over the non-fungicide treated (-F) wheats. An increase (p<0.1) of 9.3% in gain:feed was also observed at the low seed rate of 40 compared to 640 seeds/$m^2$. It was concluded that the type of wheat sample and environmental growing conditions significantly affects bird performance when fed wheat-based diets.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.413-418
• /
• 2006

Sodium hyaluronate (NaHA), water soluble polymer having ultra-high molecular weight, is characterized by using on-line frit inlet asymmetrical flow field-flow fractionation (FI-AFlFFF) and multiangle light scattering (MALS). This study demonstrates the capability of power programming FI-AFlFFF for the separation of NaHA and the applicability of FI-AFlFFF with MALS for the characterization of molecular weight distribution and their structural information. Since sample injection and relaxation in FI-AFlFFF are achieved by using hydrodynamic relaxation, separation of high molecular weight polymers can be achieved smoothly without halting the separation flow. Experiments are carried out with the two different NaHA products (a raw NaHA sample and a thermally degraded NaHA product) and molecular weight distribution and conformations in solution are determined. Influence of sample filtration on the change of molecular weight distribution is also discussed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.161-168
• /
• 2003

In the drift design of high-rise buildings, once the geometry and dimensions of a structure are predetermined, engineer's remaining work is determination of the member size to satisfy the strength and the stiffness requirements. For the case of highrise buildings, designs are determined by the stiffness requirements at the final stage of structural design. Thus, engineers try to find a minimum weight design with maximum lateral stiffness. However, there is no guideline for engineers on the required weight of structures per unit area to satisfy the stiffness requirements. In this study, drift design method considering weight modification factors are presented and applied to a 20-story structure. The proposed drift design method considering weight modification factors may give the guideline for engineers on the amount of structural weight to attain target displacement.

• Food Science of Animal Resources
• /
• v.43 no.4
• /
• pp.553-562
• /
• 2023

With an increase in meat consumption, the need to measure the weight of each primal cut of pork has increased. Recently, automation devices have been used to measure the weight of each primal cut of pork. The objective of this study was to investigate the accuracy of VCS2000, one of the non-invasive pig carcass analyzers. Production levels of 7 primal cuts of 50 pigs were measured with VCS2000. Average error rates between dissected value for each primal cut and VCS2000 measurement values of ham, shoulder picnic, belly, loin, and shoulder blade were around 5%. Average error rates for spare rib and tenderloin were about 10%. Correlation coefficients between the dissected value and the VCS2000 measured value for ham, shoulder picnic, loin, belly, and shoulder blade were high at 0.66-0.83. Correlation coefficients of spare rib and tenderloin were low at 0.35 and 0.47. Coefficient of determination of the VCS2000 measured value for each primal cut by regression analysis was 0.77 or more for ham, shoulder picnic, loin, and shoulder blade and 0.63 for belly. Coefficients of determination for spare rib and tenderloin were low at 0.40 and 0.27. In addition, the coefficient of determination of VCS2000 for each primal cut was higher than that of the dissected value for all primal cuts. In conclusion, pig carcass analysis using the VCS2000 has a high reliability for pork cuts with high production levels, but a relatively low reliability for pork cuts with low production levels and high fat levels.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.19 no.2
• /
• pp.243-248
• /
• 2009

The Larval critical weight is the minimal mass at which further growth in not necessary for a normal time course to pupation. Larval critical weight (Lcw), pupal critical weight (Pcw) and adult critical weight (Acw) of different breeds of Bombyx mori L. were determined through starvation (food deprivation). The Lcw was found to be about 938.46, 2397.26, 2283.57 and 2220.97 mg in males and 1118.15, 2681.04, 2604.9 and 2455.88 mg in females of the multivoltine breed (Nistari), Bivoltine breeds (P5 & NB18) and their hybrid (P5$\times$NB18) respectively. Bivoltine breed P5 took more time (3.35 days) followed by NB18 (3.13 days) & P5$\times$NB18 (3.02 days) to attain larval critical weight (In $5^{th}$ Instar) than the multivoltine breed Nistari (2.42 days). Decrease in weight from larval maximal weight to pupal weight and to adult weight was also observed more in multivoltine than bivoltines, which may be due to more latent feeding period in bivoltines. Since Lcw is a stable character and independent of environment, it could be utilized for characterization of silkworm breeds to assess the quality of an insect.