• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.1
• /
• pp.19-24
• /
• 2007

Covariance components and genetic parameters of weekly live body weight from hatching to six weeks of age and age of sexual maturation were estimated in a laying type Japanese quail line. The univariate and bivariate animal model analysis included hatching group and sex as fixed effects. Each trait was analysed with animal as random effect to fit the additive direct effect. Additional random effects incorporated in the models were changed according to the trait examined. The best model for a trait was chosen based on a likelihood ratio test, comparing the models with and without maternal additive genetic and maternal permanent environmental effects. Heritability estimates of live-weight at hatch and one to six weeks of age with their standard errors were 0.22${\pm}$0.088, 0.39${\pm}$0.099, 0.31${\pm}$0.086, 0.38${\pm}$0.056, 0.46${\pm}$0.055, 0.50${\pm}$0.059, and 0.56${\pm}$0.062, respectively. Direct heritability value of age of sexual maturation was moderate (0.24${\pm}$0.055). The variances due to permanent environmental effect of dam after one week of age and maternal genetic effect after two weeks of age were not important sources of variation. The correlations between direct and maternal genetic effects were negative and ranged from high to moderate values (-0.21 to -0.83). Among the weekly live weights, genetic correlations were generally high between not only successive but also early and late weightings. It suggests that selection for final weight may be based on early weight records. Genetic correlations between age of sexual maturation and live weights were low, favourable but had high standard errors. These results indicate that selection for high weight will potentially result in lower age of sexual maturation only with accurate determination of breeding values.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.12
• /
• pp.1782-1788
• /
• 2003

A mathematical model has been constructed to estimate the amino acid requirements for growing Taihe silky fowls in early stage. A requirement was taken as the sum of the needs for maintenance, for gain in carcass weight without feathers, and for the feathers. The maintenance requirement was considered to be the sum of the needs for replacing skin and intestinal losses and for the obligatory creatinine excretion in the urine. A comparative slaughter trial and nitrogen balance trials with growing and adult Taihe silky fowls, respectively, were conducted to estimate the parameters in the model. The amino acid requirements were then calculated with the constructed models. The results showed as following: the replacement needs for skin nitrogen loss was determined at 213.41 mg/d for adult male fowls (body weight 1.60 kg); creatinine excretion in these birds was 4.04 mg/d. when fed an nitrogen-free diets, the adult male fowls with body weight 1.60 kg excreted a total of 246.10 mg/d endogenous nitrogen. The net protein requirement for maintenance was estimated at $11.24mg/w_g{^{0.75}}/d$Per gram of body weight gain contained 27.18 mg carcass nitrogen for growing birds in early stage, but feathers nitrogen in per gram of body weight gain increased with age. The amino acid requirements for growing Taihe silky fowls were slightly higher than for starting and growing pullets, but lower than that of broiler chicks. The amino acid requirements patterns changed with weeks of age.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.3
• /
• pp.204-213
• /
• 2020

BACKGROUND: Since the number of crops cultivated in reclaimed land is huge, it is very difficult to quantify the total crop production. Therefore, a non-destructive method for predicting crop production is needed. Salt tolerant root vegetables such as red beets and sugar beet are suitable for cultivation in reclaimed land. If their underground biomass can be predicted, it helps to estimate crop productivity. Objectives of this study are to investigate maximum leaf length and weight of red beet, sugar beet, and turnips grown in reclaimed land, and to determine optimal model with regression analysis for linear and allometric growth models. METHODS AND RESULTS: Maximum leaf length, width, and root fresh weight of red beets, sugar beets, and turnips were measured. Ten linear models and six allometric growth models were selected for estimation of root fresh weight and non-linear regression analysis was conducted. The allometric growth model, which have a variable multiplied by square of maximum leaf length and maximum leaf width, showed highest R² values of 0.67, 0.70, and 0.49 for red beets, sugar beets, and turnips, respectively. Validation results of the models for red beets and sugar beets showed the R² values of 0.63 and 0.65, respectively. However, the model for turnips showed the R² value of 0.48. The allometric growth model was suitable for estimating the root fresh weight of red beets and sugar beets, but the accuracy for turnips was relatively low. CONCLUSION: The regression models established in this study may be useful to estimate the total production of root vegetables cultivated in reclaimed land, and it will be used as a non-destructive method for prediction of crop information.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.5
• /
• pp.431-438
• /
• 2016

This research investigated the relationship between the corrosion damage characteristics of offshore wind steel substructure and the time of current density application by electrochemical accelerated short-term corrosion test. The galvanostatic corrosion was conducted on the steel specimens in natural seawater with a constant current density ranging from $1mA/cm^2$ to $200mA/cm^2$ for 1 ~ 180 min. Macro and micro observation was carried out on the surface of the corrosion damaged area using SEM and 3-dimensional analysis microscope. The weight loss of the specimens before and after was calculated as the difference between the initial weight prior to corrosion and weight after removal of the corrosion product. It was shown that during galvanostaic corrosion process, the corrosion behavior could be characterized by the onset of pitting corrosion in the early stage and the uniform corrosion in the late stage, showing damage development in the depth direction with the time of current application. The result of the 3D analysis revealed that both damage depth and surface roughness increased with increasing time of current application. The weight loss curves with time showed that a coefficient of determination ($R^2$) was relatively high for the relationship between the time of current application and weight loss. As a result, the degree of corrosion can be controlled by simply varying the time of current application.

• Journal of Veterinary Clinics
• /
• v.34 no.1
• /
• pp.34-38
• /
• 2017

The aims of the present study were to determine the weaning time for adoption of kittens, and to evaluate the fetal growth rate during pregnant in free-roaming cats. This study was conducted on three pregnant free-roaming cats (one feral cat and two stray cats). Radiography and ultrasonography were performed on the feral cat and on one of the stray cats. In the feral cat, fetal head diameter was measured once during pregnancy to determine the cesarean section (C-sec) time. In the stray cat, serial fetal head diameter was measured from capture to parturition. The body weight of the feral cat's kittens was measured from 4 weeks postpartum because of their wildness. That of the stray cats' kittens was measured immediately after birth. In the feral cat, scheduled C-sec was performed at predicted parturition day by measurement of head diameter, and six healthy kittens were delivered. The stray cats had five and six kittens by natural delivery, respectively. In the body weight gain of feral and stray cat's kittens, two female kittens of the feral cat lost weight rapidly after they were separated from their mother, so they were returned to their mother for 1 more week. After that, the female kittens grew up without difficulty. Body weight gain of the ten kittens born to the two stray cats consistently increased, by approximately 14 g every day, until they were adopted. The body weight of kittens born by natural delivery was on average 77.5 g greater than that of kittens born by C-sec. However, the gap decreased with time. During the stray cat's pregnancy, fetal head diameter increased by 0.042 cm every day. Maximum head size before parturition was 2.43 cm. These results indicate that the weaning time for adoption of kittens was 5-week-old postpartum.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.829-834
• /
• 2005

A series of reinforced G109 type specimens was fabricated and pended with a 15 weight percent NaCl solution. Mix design variables included 1) two cement alkalinities (equivalent alkalinities of 0.32 and 1.08), 2) w/c 0.50 and 3) two rebar surface conditions (as-received and wire-brushed). Potential and macro-cell current between top and bottom bars were monitored to determine corrosion initiation time. Once corrosion was initiated, the specimen was ultimately autopsied to perform visual inspection, and the procedure included determination of the number and size of air voids along the top half of the upper steel surface. This size determination was based upon a diameter measurement assuming the air voids to be half spheres or ellipse. The followings were reached based upon the visual inspection of G109 specimens that were autopsied to date. First, voids at the steel-concrete interface facilitated passive film breakdown and onset of localized corrosion. Based upon this, the initiation mechanism probably involved a concentration cell with contiguous concrete coated and bare steel serving as cathodes and anodes, respectively. Second, the corrosion tended to initiate at relatively large voids. Third, specimens with wire-brushed steel had a lower number of voids at the interface for both cement alkalinities, suggesting that air voids preferentially formed on the rough as-received surface compared to the smooth wire brushed one.

• Journal of the Korean Geosynthetics Society
• /
• v.6 no.2
• /
• pp.27-32
• /
• 2007

Analysis was performed using AHP (Analytic Hierarchy Process) technique for the determination of priority on the effect factors and the preferences on cut-slope reinforcing methods. The results from professional group, such as researchers, design engineers and construction engineers, show that stability, durability and environmental condition are the most important effect factors. The retaining wall and the cutting methods were predominant for stability, economical efficiency, and maintenance/management in the evaluation of preferences on the cut-slope reinforcing methods interpreted for the increasing method of safety factor.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.112-118
• /
• 2020

This paper examined the water repellency, water proofing and water vapor permeability of twelve types of woven fabrics for sports wear clothing. Their physical properties were compared and discussed with the fabric structural parameters and surface finishing effect. A water repellent property of 100% was obtained in the coated or laminated water repellent finished fabrics; in addition, cotton/nylon breathable composite fabrics treated with a laminated finishing and with low fabric density showed a 90% water repellency. Water proofing fabric above 6,000 mm H₂O hydraulic pressure was achieved by coated or laminated finishing; however, high density fabric or medium-level coated fabrics exhibited 100% water repellent and low water proofing characteristics. Superior water vapor permeability characteristics with good water repellency and proofing properties were achieved at the 2.5 layered low density and with 0.7 - 0.9 cover factor nylon fabrics treated with hydrophilic laminated finishing. The regression analysis for examining the effects of fabric structural parameters and surface finishing such as coating and laminating to the water vapor permeability exhibited a high determination coefficient of fabric structural parameters of 63.5%; in addition,, main factors among fabric structural parameters appeared to be cover factor and fabric thickness per weight. Coating and Laminating factors exhibited determination coefficient of water vapor permeability parameters of 36.5%.

• KSBB Journal
• /
• v.32 no.1
• /
• pp.54-62
• /
• 2017

This study aimed to estimate the measurement uncertainty related to determination of hyaluronic acid used as a dietary supplement by high-performance liquid chromatography. According to the guidelines of the Association of Official Analytical Chemists, the analytical processes for determination of hyaluronic acid were performed. And the measurement uncertainty obtained during the analytical processes were expressed in accordance with mathematical/ statistical guidances of GUM (Guide to the Expression of Uncertainty in Measurement) & EURACHEM (Focus for Analytical Chemistry in Europe) for the analytical operations. For the uncertainty in measurement produced based on this analytical method, the expanded uncertainty was calculated by using the relative standard uncertainty between analytical results and sources of uncertainty in measurement (sample weight, final volume, extraction volume, standard solution, matrix and instrument etc). In the results of 95% confidence interval, it was calculated that the uncertainty in measurement was $57.75{\pm}8.76{\mu}g/kg$ (k=2.0). Therefore, it showed that the measurement uncertainty obtained by this analytical method influences on 15.2% of the contents of hyaluronic acid as the analytical results.

• Journal of Life Science
• /
• v.21 no.4
• /
• pp.610-612
• /
• 2011

We developed a spectrophotometric assay for the quantitative determination of chlorogenic acid based on the formation of green pigment at $50^{\circ}C$ under glycine and alkaline conditions in 96-well plates. The formation of green pigment was linear with a series of chlorogenic acid concentration (0-$300\;{\mu}M$). Using this method, the content of chlorogenic acid (12.42 mg/g dry weight) in the leaves of blueberry was quantified. This method is high-throughput, cost-effective, rapid, and easy to perform.