• Corrosion Science and Technology
• /
• v.2 no.2
• /
• pp.98-101
• /
• 2003

The Electrical Resistance Probe of carbon steel and weight loss coupons were exposed in atmosphere and in the lake water of Hanoi. The comparison of data received by two methods after one year exposure was presented. The correspondence of the data of these methods on the exposure time in both environments showed a capacity of using Electrical Resistance Probe in Vietnamese natural corrosion testing of Carbon steel.

• Journal of Community Nutrition
• /
• v.3 no.1
• /
• pp.8-13
• /
• 2001

The purpose of study was to test the hypothesis that three are differences in body size dietary behavior and nutrient intakes of adolescent girls with weight control experience. Cross-sectional survey was carried out with a questionnaire and anthropometric measurements . Subjects were 724 healthy adolescent girls from middle and high schools of urban and rural areas in Inchon and divided into two subgroups with weight control experience. Subjects trying to lose weigh were 25.1% in middle school girls and 47.1% in high school girls. There were significant differences in weight and BMI between weight control experience and non- experienced groups in middle school students. There were significant differences in skipping meals and reason of skipping meals between weigh control experience and non-experience groups which might show that skipping meal was used as a weight loss method among female school students. There was no significant difference in nutrient intakes between weight control experienced and non-experienced groups in middle and high school subjects. these results suggest that nutrition education is necessary for adolescent girls to practice appropriate weigh control strategies including desirable eating habits and adequate intake of nutrients such as energy vitamin A vitamin B$_2$calcium and iron.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.238-243
• /
• 2011

This study compared Kd, loss factor and thickness of floor impact isolator by loading/unloading heat treatment with results by continuous loading treatment and checked problem and improvement method of heat treatment condition for the long-term stability evaluation of the floor impact isolation. As the results, it is required the change of heat treatment condition unloading now to loading as actual weigh on the floor impact isolator.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.45.2-45.2
• /
• 2009

A coronary graft fabricated from PLGA poly (lactic-co-glycolic acid) and chitosan electros puns deposited on poly caprolactone (PCL) electro spun tube. Mechanical properties of tube were evaluated through extruder machine depending on thickness of vessel wall. Biocompatible properties were evaluated by SEM morphology, amount of cell counting and MTT assay method for depending on culture days (1, 3, 5 days). MTT assay, counting cell and SEM morphology showed that cells were fast growth and immigration after 5 days. Biodegradability was monitored through loss weigh method for incubator days.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.169-169
• /
• 2023

Most distributed water is not used effectively due to water loss occurring in pipe networks. These water losses are caused by leakage, typically due to high water pressure to ensure adequate water supply. High water pressure can cause the pipe to burst or develop leaks over time, particularly in an aging network. In order to reduce the amount of leakage and ensure proper water distribution, it is important to apply pressure management. Pressure management aims to maintain a steady and uniform pressure level throughout the network, which can be achieved through various operational schemes. The schemes include: (1) installing a variable speed pump (VSP), (2) introducing district metered area (DMA), and (3) operating pressure-reducing valves (PRV). Applying these approaches requires consideration of various hydraulic, economic, and environmental aspects. Due to the different functions of these approaches and related components, an all-together optimization of these schemes is a complicated task. In order to reduce the optimization complexity, this study recommends a sequential optimization method. With three network operation schemes considered (i.e., VSP, DMA, and PRV), the method explores all the possible combinations of pressure management paths. Through sequential optimization, the best pressure management path can be determined using a multiple-criteria decision analysis (MCDA) to weigh in factors of cost savings, investment, pressure uniformity, and CO₂ emissions. Additionally, the contribution of each scheme to pressure management was also described in the application results.

• Corrosion Science and Technology
• /
• v.8 no.6
• /
• pp.243-250
• /
• 2009

When a steel sheet pipe applied to marine environment, an anti-corrosive coating should be treated to obtain long-term life-time for steels, especially, splash zone. Although anti-corrosive property of coatings is required to be tested in real marine environment, it is difficult because of long test time such as 20 years or more time. Therefore, we used cyclic corrosion tester in a laboratory, which has similar conditions with salt-dry-wet process such as real marine environment. Anti-corrosive properties of the coatings and two steels were tested their anti-corrosive properties under cyclic corrosion test conditions(KS D ISO 14993) and the results were compared with estimate life-time in real marine environment. According to cyclic corrosion test, accelerated corrosive factor of each anti-corrosive coating was investigated accelerated corrosive factor from impedance with EIS method. Accelerated corrosive factor of type SS400 carbon steel and A690 was also investigated their accelerated corrosive factor from the regression curves of weigh loss results. One of the anti-corrosive coatings showed about 50 years life-time compared with standard sample life-time. Carbon steel SS400 showed from 0.1 mm/yr to 0.06 mm/yr as its corrosion rate.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.66-70
• /
• 1984

An attempt was made on the development of a commercial scale storage method of garlic by irradiation. Irradiated garlics with 50, 100 and 150 Gy were stored at natural low temperature storage room $(12{\pm}6^{\circ}C,{\;}75-85%{\;}RH)$ and the physicochemical properties during the 10 months storage were investigated. The unirradiated garlic was mostly sprouted after 8 months storage, whereas the sprouting of all irradiated groups was completely inhibited until 10 months storage, The rotting rate and weigh loss of garlic after 10 months storage were reduced by 25 to 54% at 100 Gy irradiation compared with those of an unirradiated group. The moisture content remained relatively constant during the whole storage period. The total sugar content was increased with storage period. Ascorbic acid content was also decreased until 8 months storage but its content was rapidly increased along with sprouting. Garlic was marketable after 10 months storage by 100 Gy irradiation combined with natural low temperature.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.1
• /
• pp.85-92
• /
• 2017

purpose: Image Guide System offers therapy precise, especially Intensity Modulated Radiation Therapy. However, organs at pelvis have variation and uncertainties each therapy. it brings IG system for verifying patient's position. In this study, analysis the variation at pelvis during rectal cancer radiation therapy. Moreover design the patient re-setup technique and apply to patients. Material and Method: 40 rectal cancer patient who have radiation therapy. The 530 image which acquired from IG system are analyzed. The bone structure, bladder, gas in the rectum, small bowel, soft tissue, weigh loss are evaluated by the criterion. The criterion are classified by best, good, bad and figure out the ratio with count. The re-setup proceed in case of one or over the two get the bad criterion and figure out the ratio of re-setup results: The ideal of therapy ratio is 19.2 % each criterion. And the good for therapy ratio is 54.9 %, the cases of bad for therapy is 25.8 %. The bad cases are have therapy after re-setup with post process. conclusion: Each pre-treatment image that acquired IG system has different results despite of same patients. The 25.8 % need to re-setup in order to unsuitable therapy. It is implies that the IG system is necessary establishing precise treatment plan like IMRT especially rectal cancer.

• Korean Journal of Metals and Materials
• /
• v.48 no.6
• /
• pp.523-532
• /
• 2010

Co-application of organic coating and cathodic protection has not provided enough durability to low-alloyed steels inseawater ballast tank (SBT) environments. An attempt has made to study the effect of alloy elements (Al, Cr, Cu, Mo, Ni, Si, W) on general and localized corrosion resistance of steels as basic research to develop new low-allowed steels resistive to corrosion in SBT environments. For this study, we measured the corrosion rate by the weigh loss method after periodic immersion in synthetic seawater at $60^{\circ}C$, evaluated the localized corrosion resistance by an immersion test in concentrated chloride solution with the critical pH depending on the alloy element (Fe, Cr, Al, Ni), determined the permeability of chloride ion across the rust layer by measuring the membrane potential, and finally, we analyzed the rust layer by EPMA mapping and compared the result with the E-pH diagram calculated in the study. The immersion test of up to 55 days in the synthetic seawater showed that chromium, aluminium, and nickel are beneficial but the other elements are detrimental to corrosion resistance. Among the beneficial elements, chromium and aluminium effectively decreased the corrosion rate of the steels during the initial immersion, while nickel effectively decreased the corrosion rate in a longer than 30-day immersion. The low corrosion rate of Cr- or Al-alloyed steel in the initial period was due to the formation of $Cr_2FeO_4$ or $Al_2FeO_4$, respectively -the predicted oxide in the E-pH diagram- which is known as a more protective oxide than $Fe_3O_4$. The increased corrosion rate of Cr-alloyed steels with alonger than 30-day exposure was due to low localized corrosion resistance, which is explained bythe effect of the alloying element on a critical pH. In the meantime, the low corrosion rate of Ni-alloyed steel with a longer than 30-day exposure wasdue to an Ni enriched layer containing $Fe_2NiO_4$, the predicted oxide in the E-pH diagram. Finally, the measurement of the membrane potential depending on the alloying element showed that a lower permeability of chloride ion does not always result in higher corrosion resistance in seawater.

• Radiation Oncology Journal
• /
• v.15 no.2
• /
• pp.113-119
• /
• 1997

Purpose : Radical gastrectomy is main treatment of gastric cancer. But the result is not satisfactory with surgery alone. Most of pattern of failure remain locoregional recurrence. To improve 5 year survival postoperative chemotherapy with or without radiotherapy has been used. We analyzed patients with stage III and IV stomach cancer who had radical operation and received postoperative radiation therapy combined with or without chemotherapy retrospectively. Material and Method : From March 1985 to June 1993, 68 patients treated with curative resection and received postoperative adiuvant radiotherapy with 36Gy or more were evaluated. Median age was 60 years(range 28-66 yrs) . Patients were followed from 3 to 133 months with median follow up of 48 months. Thirty seven patients had non signet ring adenocarcinoma, 29 signet ring cell, 2 other cell. Patients with stage IIIA, IIIB, IV disease were 19, 25 and 24 respectively Chemotherapy was given to all patients except two. Results : Five-year overall survival and disease-free survival rate were 36.6% and 33.6%, respectively. Prognostic factor affecting survival were assessed. High ratio of jnvolved/dissected Iymph node, signet ring histology showed Poor Prognosis with statistical significance. Presence of residual tumor after surgery, stageIV. split course of radiation therapy, age, number of involved Iymph node, number of Iymph node dissection and grade of tumor affected survival without statistical significance, Type of chemotherapy did not affect survival. Recurrence was documented in 34 patients. High recurrence was seen in omentum and peritoneum with 23.5%, and remnant stomach, anastomosis site, A-loop and I-loop had also high recurrence with 13.2%. In field locoregional recurrence was 20.7% and total distant metastases were 39.7%. Total intraabdominal failure was 47.1% and extraabdominal failure was 13.2%. Treatment toxicity was considered to be acceptable. 22.1% of patients had grade 3 and only 1 patient had grade 4 leukopenia. Six Patients(8.8%) had weigh loss more than 10%. Conclusion : Treatment toxicity was acceptable with combined treatment with chemotherapy and radiotherapy. Locoregional recurrence was relatively low compared to distant failure with addition of irradiation. Peritoneal and omental seeding was high Five-rear surival was increased with combined modality. Radiation may eradicate minimal residual disease and improve survival, To evaluate role of radiation Prospective randomized study employing chemotherapy alone and chemotherapy plus radiation is necessary. Futhermore to reduce intraabdominal failure, role of intraabdominal chemotherapy in addition to combined chemotherapy plus radiation has to be explored.