DOI QR코드

DOI QR Code

Effects of Alloying Elements on Corrosion Resistance of Low Alloyed Steels in a Seawater Ballast Tank Environment

Seawater ballast tank 환경에서 저합금강의 내식성에 미치는 합금원소의 영향

  • Kim, Dong Woo (School of Mat. Sci. and Eng. Hongik University) ;
  • Kim, Heesan (School of Mat. Sci. and Eng. Hongik University)
  • 김동우 (홍익대학교 재료공학부) ;
  • 김희산 (홍익대학교 재료공학부)
  • Received : 2010.02.17
  • Published : 2010.06.22

Abstract

Co-application of organic coating and cathodic protection has not provided enough durability to low-alloyed steels inseawater ballast tank (SBT) environments. An attempt has made to study the effect of alloy elements (Al, Cr, Cu, Mo, Ni, Si, W) on general and localized corrosion resistance of steels as basic research to develop new low-allowed steels resistive to corrosion in SBT environments. For this study, we measured the corrosion rate by the weigh loss method after periodic immersion in synthetic seawater at $60^{\circ}C$, evaluated the localized corrosion resistance by an immersion test in concentrated chloride solution with the critical pH depending on the alloy element (Fe, Cr, Al, Ni), determined the permeability of chloride ion across the rust layer by measuring the membrane potential, and finally, we analyzed the rust layer by EPMA mapping and compared the result with the E-pH diagram calculated in the study. The immersion test of up to 55 days in the synthetic seawater showed that chromium, aluminium, and nickel are beneficial but the other elements are detrimental to corrosion resistance. Among the beneficial elements, chromium and aluminium effectively decreased the corrosion rate of the steels during the initial immersion, while nickel effectively decreased the corrosion rate in a longer than 30-day immersion. The low corrosion rate of Cr- or Al-alloyed steel in the initial period was due to the formation of $Cr_2FeO_4$ or $Al_2FeO_4$, respectively -the predicted oxide in the E-pH diagram- which is known as a more protective oxide than $Fe_3O_4$. The increased corrosion rate of Cr-alloyed steels with alonger than 30-day exposure was due to low localized corrosion resistance, which is explained bythe effect of the alloying element on a critical pH. In the meantime, the low corrosion rate of Ni-alloyed steel with a longer than 30-day exposure wasdue to an Ni enriched layer containing $Fe_2NiO_4$, the predicted oxide in the E-pH diagram. Finally, the measurement of the membrane potential depending on the alloying element showed that a lower permeability of chloride ion does not always result in higher corrosion resistance in seawater.

Keywords

Acknowledgement

Supported by : 포스코

References

  1. B. S. Fultz, J. Protective Coatings & Linings 1, 24 (1984).
  2. JFE Steel Corporation, Development of New Corrosion-Resistant Steel for Greater Safety of Crude Oil Tankers, http://www.jfe-steel.co.jp/en/release/2008/080129.html (2008).
  3. M. Yamashita, H. Miyuki, H. Nagano, and T. Misawa, Corros. Eng. 43, 43 (1994).
  4. T. Kamimura and M. Stratmann, Corros. Sci. 43, 429 (2001). https://doi.org/10.1016/S0010-938X(00)00098-6
  5. T. Kodama and T. Nishimura, Corros. Sci. & Tech. 31, 137 (2002).
  6. H. Miyuki, M. Yamashita, and M. Fujiwara, Zairyo-to-Kankyo 47, 186 (1998). https://doi.org/10.3323/jcorr1991.47.186
  7. T. Nishimura, Corros. Sci. 50, 1306 (2008). https://doi.org/10.1016/j.corsci.2008.01.025
  8. M. Yamashita, T. Yonezawa, and H. Uchida, J. Jpn Inst. Met. 63, 1332 (1999). https://doi.org/10.2320/jinstmet1952.63.10_1332
  9. T. Nishimura, K. Noda, and T. Kodama, Corros. 57, 753 (2001). https://doi.org/10.5006/1.3280609
  10. J.-J. Shim, S.-J. You, Y.-S. Choi, J.-G. Kim, and J.-Y. Yoo, J. Kor. Inst. Met. & Mater. 41, 909 (2003).
  11. M. Stratmann, K. Bohnenkamp, and T. Ramchandran, Corros. Sci. 27, 905 (1987). https://doi.org/10.1016/0010-938X(87)90058-8
  12. K.-Y. Kim, Effect of Ca-Modification on the seaside corrosion property of the Weathering steel (III), p.2, POSTEC (2001).
  13. A. J. Bard and L. R. Faulkner, Electrochemical methods, 2nd eds., p.70 New York, John Wiley & Sons, Inc. (2001).
  14. Z. Szklarska-Smialowska, Pitting corrosion of metals, p.311-312, NACE, Huston (1977).
  15. F. Blekkenhorst, G. M. Ferrari, C. J. Van der Wekken, and F. P. Ijsseling, Br. Corros. J. 21, 163 (1986). https://doi.org/10.1179/000705986798272136
  16. K. Noda, T. Nishimura, H. Masuda, and T. Kodama, Corros. Sci. & Tech. 31, 48 (2002).
  17. A. Nishikata, Y. Yamashita, and H. Katayama, Corros. Sci. 37, 2059 (1995). https://doi.org/10.1016/0010-938X(95)00104-R
  18. H. Kihira, M. Tanaka, H. Yasunami, H. Takezawa, T. Kusunoki, K. Matsuoka, Y. Harada, and K. Tanabe, Nippon steel technical report No. 90 33 (2004).
  19. S. Suzuki, E. Matsubara, T. Komatsu, Y. Okamoto, K. Kanie, A. Muramatsu, H. Konishi, J. Mizuki, and Y. Waseda, Corros. Sci. 49, 1081 (2007). https://doi.org/10.1016/j.corsci.2006.06.029
  20. H. Kim, D. Kim, and K. Lim, Effects of alloying elements on corrosion resistance of alloyed steels in seawater ballast tank, p.104-106 POSCO, Pohang (2009).
  21. A. Nishikata, Y. Yamashita, and H. Katayama, Corros. Sci. 37, 2059 (1995). https://doi.org/10.1016/0010-938X(95)00104-R
  22. H. Kim, D. Kim, and K. Lim, Effects of alloying elements on corrosion resistance of alloyed steels in seawater ballast tank, p.37 POSCO, Pohang (2008).
  23. K. Sugimoto and Y. Sawada, Corros. Sci. 17, 425 (1977). https://doi.org/10.1016/0010-938X(77)90032-4
  24. Y.-H. Lee, Effect of W on Corrosion Resistance and precipitation Behavior of Duplex stainless steel, p.8-9, POSTEC, Pohang (1998).