• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.282-289
• /
• 2017

The flexural behavior tests of UHPC segmental Box girder which has 160MPa compressive strength and 15.4m length were carried out. The test variables are area of prestressing wires, volume fraction of steel fibers and longitudinal reinforcing bars in upper flange and web. PS tendons which has 32 strands of 15.2mm diameter in lower flange, 24 strands and 14 strands in lower flange were arranged and volume fraction of 2%, 1.5% and 1.0% is used in box girder concrete. UHPFRC box girder which has 32 strands in lower flange showed the over reinforcement and brittle behavior. UHPFRC box girder which has 24 strands showed the similar peak load as 32 strands girder and ductile behavior as large deflection. UHPFRC box girder which has 14 strands showed half of the peak load of 24 strands box girder and ductile behavior. After the application of the formular for the reinforcement index to the behavior of the UHPFRC box girders, reinforcement index does not determine the characteristic of behavior of UHPFRC box girder exactly. So the index should consider the dimension precisely and modify the reference value corresponding to the 0.005 strain of the prestressing strands.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.3
• /
• pp.117-124
• /
• 2002

Poly(acrylonitrile)(PAN) solutions in dimethylformamide(DMF) were electrospun to prepare webs consisting of 400nm ultra-fine fibers. The webs were oxidatively stabilized, activated by steam and resulted to be activated carbon fibers(ACFs). The specific surface area was $800\~1230 m^2/g$, which showed a trend of a decrease of the surface area with an increase in activation temperature, showing opposite behavior to the other ACFs. The activation energy of the stabilized fibers for the steam activation was determined as 29.2 kJ/mol to be relatively low indicating the easier activation than that of other carbonized fibers. The ACF webs were characterized by pore size and specific surface uea which would be related to the specific capacitance of the electrical double layer capacitor (EDLC). The specific capacitances measured were 27 F/g, 25 F/g, 22 F/g at the respective activation temperature of $700^{circ}C,\;750^{\circ}C\;800^{\circ}C$, showing similar trend with the specific surface area i.e., the higher activation temperature was, the lower specific capacitance resulted.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.5 s.72
• /
• pp.609-619
• /
• 2004

An investigation was conducted on the activities around Europe in order to solve the problem of the thermal bridging of steel studs, which had caused a significant disadvantage. This study included the following: diminishing the contact area between the studs and the sheathing, lengthening the heat transfer route, replacing the steel web with a less conductive material, and placing foam insulation in locations where the thermal shorts are most critical. Although energy efficiency is usually the focus of such foreign cases because their stud application is mostly limited to low-rise residential buildings, both structural and thermal performance are taken into consideration in this study because these target middle-story buildings. A hybrid stud composed of steel and polymer was also developed. This hybrid stud, which is 150 SL in size, is made of a galvanized steel sheet (SGC58) and a glass fiber reinforced polymer (GFRP) withepoxy bonding. A total of 32 specimens were manufactured. Its parameters comprise two types of connection detail,s: the thickness of steel (1.0mm and 1.2mm) and of the GFRP (4mm-4ply and 6mm-6ply), and the ratio of the length to the depth (L/D = 3, 6, 9, 12). Steel stud specimens with the same conditions were compared to the hybrid stud. The test revealed that in the case of the steel specimen with a thickness of 1.0mm, the maximum load of hybrid studs increased an average of 1.62 times comparedto that of the steel stud. In the case of the steel specimen with a thickness of 1.2mm, on the other hand, the average increase was 1.46times. All specimens showed full composite action until the collapse.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.3
• /
• pp.71-80
• /
• 2019

The Fourth Industrial Revolution, centered on intelligence and information, began to take hold in 2016. This study uses virtual reality technology, which is the most popular technology of the Fourth Industrial Revolution. The purpose of this study is to explore a Virtual Walk-through method, which can be easily applied to landscape architecture. At present, virtual reality technology is widely used in the fields of games, emergency training, and architectural design. However, in the field of landscape architecture, it is still in the development stage. In addition, most of the traditional ways to display virtual reality use 2D images, but such methods have some limitations. Therefore, this research addresses the three stages of "design-exhibition-experience" and puts forward a new simple method called 'Virtual Walk-through' that breaks from traditional landscape design exhibitions. The results show that compared with traditional methods, virtual reality has many advantages, such as the freedom of experience, a diversity of viewing angles, information supply, interaction, etc. It can show high quality images and effects, which are suitable for landscape design. It provides an evaluation method for garden design that can be utilized in the future. It is simple and has value as it can reflect the method and the expected effects. Virtual reality technology can bring an infinite number of prospects to the development of landscape architecture.

• Journal of Korean Home Economics Education Association
• /
• v.32 no.2
• /
• pp.59-76
• /
• 2020

The purpose of this study was to develop and evaluate the teaching/learning process plan of 'housing culture and practical space use' for home economics in middle school according to the problem based learning(PBL) model. The plan consisting of 4-lessons has been developed and implemented following the steps of ADDIE model. Various activity materials (4 scenarios, 6 individual activity sheets, 10 reading texts, and 5 working resources) and visual materials (4 sets of ppt and 4 moving pictures) as well as questionnaire were developed for the 4-session lessons. The plans were implemented to a single class of 21 junior students at H middle school in rural area, Kyeongnam, from 1^st to 12^th of April, 2019. Students highly enjoyed and were satisfied with the whole 4-lessons in aspects such as understanding of the contents, adequacy of materials and activities, and usefulness in one's own daily life. Additionally, they have more actively participated in the lessons than usual and even interested in learning more of such lessons. Students also reported that they highly accomplished the goal of each lesson as well as overall objectives. They showed interest in the major part of PBL lesson such as scenario and group activities. And they engaged themselves in drawing the share housing space plan with '5D planner' web program which they described as the best part of the lessons. The teaching/learning process plan developed in this study may be used as a theme of maker education, which is emerging these days. It can be concluded that the PBL teaching/learning process plans for 'housing values and practical space use' would contribute to improving students' attitude on living with others and ability to manage one's individual life.

• Korean Journal of Ecology and Environment
• /
• v.47 no.1
• /
• pp.53-61
• /
• 2014

The origin of particulate organic matter (POM) and food web structure were investigated in Shingu reservoir based on stable isotope analysis from pre-monsoon (July) to post-monsoon (September) 2007. According to the depth in Shingu reservoir, the $^{13}C$ and $^{15}N$ values of POM for pre-monsoon period were nonsignificant distinction, while it was significant variation after rainfall period. The ${\delta}^{13}C$ values of POM in premonsoon period ranged from -25.1‰ to -26.1‰ in whole water column, but the ${\delta}^{13}C$ values of POM in post-monsoon period showed relatively wide range between -23.2‰ and -27.5‰. The apparently lighter values (average -27.5‰) in near bottom water (7 m water depth) demonstrate that POM in high turbid water in post-monsoon period may be derived from the outside terrestrial plants (allochthonous) through heavy rainfall during the summer monsoon period. After rainfall period, $^{13}C$ and $^{15}N$ values of D. brachyurum showed -23.3‰ and 12.2‰, respectively, while B. longirostris showed -27.1% and 8.7%, respectively. It suggested that D. brachyurum mainly feed on POM in autochthonous organic matter pool, but B. longirostris mainly consumed POM in allochthonous organic matter pool after rainfall period. Carbon and nitrogen stable isotope ratios were markedly different among secondary consumers. The carp (C. carpio) and catfish (S. asotus) were in the higher trophic level and crucian carp (C. auratus) and mudfish (M. mizolepis) were in the lower trophic level. $^{13}C$ and $^{15}N$ values of Z. platypus didn't significantly changed between before and after rainfall period. But P. parva and C. auratus apparently changed the $^{13}C$ and $^{15}N$ values after rainfall period. It is suggested that P. parva and C. auratus seem to feed allochthonous food source while Z. platypus depend on autochthonous food source.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.10
• /
• pp.5973-5981
• /
• 2013

At present, the most common cause of cancer-related death in women is breast cancer. In a large proportion of breast cancers, there is the overexpression of human epidermal growth factor receptor 2 (HER2). This receptor is a 185 KDa growth factor glycoprotein, also known as the first tumor-associated antigen for different types of breast cancers. Moreover, HER2 is an appropriate cell-surface specific antigen for passive immunotherapy, which relies on the repeated application of monoclonal antibodies that are transferred to the patient. However, vaccination is preferable because it would stimulate a patient's own immune system to actively respond to a disease. In the current study, several bioinformatics tools were used for designing synthetic peptide vaccines. PEPOP was used to predict peptides from HER2 ECD subdomain III in the form of discontinuous-continuous B-cell epitopes. Then, T-cell epitope prediction web servers MHCPred, SYFPEITHI, HLA peptide motif search, Propred, and SVMHC were used to identify class-I and II MHC peptides. In this way, PEPOP selected 12 discontinuous peptides from the 3D structure of the HER2 ECD subdomain III. Furthermore, T-cell epitope prediction analyses identified four peptides containing the segments 77 (384-391) and 99 (495-503) for both B and T-cell epitopes. This work is the only study to our knowledge focusing on design of in silico potential novel cancer peptide vaccines of the HER2 ECD subdomain III that contain epitopes for both B and T-cells. These findings based on bioinformatics analyses may be used in vaccine design and cancer therapy; saving time and minimizing the number of tests needed to select the best possible epitopes.

• Science of Emotion and Sensibility
• /
• v.12 no.2
• /
• pp.169-180
• /
• 2009

The present study have investigated the effect of the characteristics of stereoscopic images and viewing environment on visual fatigue. We manipulated the speed of stereo images with motion-in-depth and viewing distance, which were used as representative variables of the characteristics of stereo image and viewing environment, respectively. Visual fatigue was evaluated with use of a subjective questionnaire which is consisting of 5 different and independent factors: "Eye pain", "Visual stress," "Nauseousness", "Body stiffness", and "Blurriness". In general, when viewing time increased from 10 minutes to 20 and 40 minutes, observers felt severe visual fatigue. Among other factors, only the factor score of "Nauseousness" was significantly increased as the speed of object moving in depth became faster. When viewing distance was increased, the score of "Blurriness" was decreased. These results suggest that different kind of the visual fatigue might be induced depending on characteristics of the stereo images and viewing environment.

• Journal of Life Science
• /
• v.18 no.8
• /
• pp.1132-1139
• /
• 2008

A CpG island is a short stretch of DNA in which the frequency of the CG dinucleotide is higher than other regions. CpG islands are present in the promoters and exonic regions of approximately $30{\sim}60$% of mammalian genes so they are useful markers for genes in organisms containing 5-methylcytosine in their genomes. Recent evidence supports the notion that the hypermethylation of CpG island, by silencing tumor suppressor genes, plays a major causal role in cancer, which has been described in almost every tumor types. In this respect, CpG island search by computational methods is very helpful for cancer research and computational promoter and gene predictions. I therefore developed a window program (called CpGi) on the basis of CpG island criteria defined by D. Takai and P. A. Jones. The program 'CpGi' was implemented in Visual C++ 6.0 and can determine the locations of CpG islands using diverse parameters (%GC, Obs (CpG)/Exp (CpG), window size, step size, gap value, # of CpG, length) specified by user. The analysis result of CpGi provides a graphical map of CpG islands and G+C% plot, where more detailed information on CpG island can be obtained through pop-up window. Two human contigs, i.e. AP00524 (from chromosome 22) and NT_029490.3 (from chromosome 21), were used to compare the performance of CpGi and two other public programs for the accuracy of search results. The two other programs used in the performance comparison are Emboss-CpGPlot and CpG Island Searcher that are web-based public CpG island search programs. The comparison result showed that CpGi is on a level with or outperforms Emboss-CpGPlot and CpG Island Searcher. Having a simple and easy-to-use user interface, CpGi would be a very useful tool for genome analysis and CpG island research. To obtain a copy of CpGi for academic use only, contact corresponding author.

• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.939-948
• /
• 2003

The objective of this study was to identify the quantitative traits loci(QTL) for economically important traits such as growth, carcass and meat quality on pig chromosome 6. A three generation resource population was constructed from cross between Korean native boars and Landrace sows. A total of 240 F$_2$ animals were produced using intercross between 10 boars and 31 sows of F$_1$ animals. Phenotypic data including body weight at 3 weeks, backfat thickness, muscle pH, shear force and crude protein level were collected from F$_2$ animals. Animals including grandparents(F$_0$), parents(F$_1$) and offspring(F$_2$) were genotyped for 29 microsatellite markers and PCR-RFLP marker on chromosome 6. The linkage analysis was performed using CRI-MAP software version 2.4(Green et al., 1990) with FIXED option to obtain the map distances. The total length of SSC6 linkage map estimated in this study was 169.3cM. The average distance between adjacent markers was 6.05cM. For mapping of QTL, we used F$_2$ QTL Analysis Servlet of QTL express, a web-based QTL mapping tool(http://qtl.cap.ed.ac.uk). Five QTLs were detected at 5% chromosome-wide level for body weight of 3 weeks of age, shear force, meat pH at 24 hours after slaughtering, backfat thickness and crude protein level on SSC6.