• Structural Engineering and Mechanics
• /
• 제64권6권
• /
• pp.783-792
• /
• 2017

Carbon Fiber Reinforced Polymer (CFRP) laminates are used widely either for repairing or strengthening of existing structures. When CFRP laminates are used for strengthening of RC continuous T-beams in the Hogging Moment Zone (HMZ); above and around the intermediate supports, it is important to study the expected positions of the laminates across the width of the beam flange. Although, it is traditional to consider CFRP laminates added above the beam web, this is not practical since walls and columns are located in such positions in general. This paper examines the effect of changing the positions of CFRP laminates used for the strengthening of the hogging moment zone across the beam flange of two-span-T-section beams. The Finite Element (FE) Package ANSYS is used to create 3-D theoretical models needed for the study. It can be concluded that changing the position of CFRP strengthening across the beam flange, in the hogging moment zone, is effective upon the overall behavior. The best locations are either above the web or at the flange just beside the web, due to the presence of walls and/or columns.

• Steel and Composite Structures
• /
• 제43권6호
• /
• pp.809-819
• /
• 2022

This paper proposes a method to predict the deflection of prestressed concrete (PC) beams with corrugated steel web (CSW) under constant load concerning time-dependent variation in concrete material. Over time, the top and bottom concrete slabs subjected to asymmetric compression experience shrinkage and creep deformations. Here, the classical Euler-Bernoulli beam theory assumption that the plane sections remain plane is not valid due to shear deformation of CSW. Therefore, this study presents a method based on the first-order shear deformation to find the long-term deflection of the composite beams under bending by considering time effects. Two experimental prestressed beams of this type were monitored under their self-weight over time, and the theoretical results were compared with those data. Additionally, 3D analytical models of the experimental beams were used according to material properties, and the results were compared with two previous cases. There was good consistency between the analytical and numerical results with low error, which increased by wave radius. It is concluded that the proposed method could reliably be used for design purposes.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.698-699
• /
• 2015

For last three years, our research team have conducted the project named "Development of construction project management technology based on BIM/GIS platform. "We developed construction cost estimation system as well as 3D modeling engine at the first two year and established a web-system which could estimate the benefits of the project and further analyze the economic and financial feasibility of the project. This paper mainly focused on the functions and specifications of web-system. The system was composed of two modules: economic feasibility estimation module and financial feasibility estimation module. While the economic feasibility estimation module determines economic feasibility of the project based on traffic demand forecasting from the public's perspective, the financial feasibility estimation module determine financial viability of the project using toll fee of the road from private entity's perspective. Compared with traditional feasibility study, the proposed system provide users with better flexibility which can make users easily to validate the project upon the change of project environments. The system was also verified with an already accomplished project. The verification showed that proposed system could provide satisfactory accurate results with reduced time and resources.

• 정보처리학회논문지D
• /
• 제10D권3호
• /
• pp.359-366
• /
• 2003

클라이언트에서 검색한 지도를 스크롤할 경우 이미 전송받은 객체를 캐슁하여 무선 데이터 전송량을 줄일 수 있지만, 클라이언트 내에서 데이터 좌표 변환, 선택적인 객체 삭제, 압축 단계, 구조화 단계가 부가적으로 요구된다 특히 좌표 변환 연산은 모바일 휴대폰의 낮은 계산 능력, 적은 메모리 용량 등과 같을 제한적 자원으로 많은 시간이 요구된다 따라서 휴대폰 기반 모바일 지도 서비스에서 효과적인 지도 제어 연산을 수행하기 위해서는 휴대폰의 제한적인 자원을 극복함과 동시에 무선 네트웍 대역폭을 줄이는 방안으로서 객체 재사용 기법이 연구되어야 한다. 이 논문에서는 클라이언트-서버 기반 모바일 벡터 지도 서비스 시스템에서 지도 제어를 위한 객체의 효율적인 객체 재사용 기법을 제안한다. 또한 실제 데이터를 제공하는 Web GIS 시스템을 이용한 실험 평가는 제안한 기법이 모바일 폰을 위한 지도 서비스에 적합하다는 것을 보여준다. 그리고 실험 결과를 토대로 객체 재사용 방법과 재전송 방법의 장단점을 분석한다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제6권2호
• /
• pp.216-224
• /
• 2000

공간 계획 시스템(Spatial Layout Planning System)은 사용자의 요구에 따라 사각의 자원을 일정 공간 안에 할당하고 사용자의 만족도를 최대화함으로써 공간 효율성을 최적화하는 시스템이다. 공간 계획 문제는 방대한 범위의 공간을 탐색해야 하므로 시간과 공간적 측면에서 높은 복잡도(Complexity)를 갖는 문제이다. 또한 특정 영역의 수정 요구나 재설계 요구와 같은 사용자의 동적인 요구 사항들을 수용할 수도 있어야 한다. 본 논문에서는 CSP(Constraint Satisfaction Problems) 해결 기법 기반의 자원 할당법을 이용함으로써 효과적으로 공간 계획 문제를 해결할 수 있도록 하였으며 사용자의 요구에 따라 변화되는 제약조건은 지능형 사용자 인터페이스 모델을 통해 좀 더 향상된 결과가 도출될 수 있도록 설계 및 구현하였다. 또한, 2차원 도면에서의 수정 요구에 대한 편이성과 시각적 검증을 위해 웹 환경 하에서의 VRML(Virtual Reality Modeling Language)을 이용한 3차원 도면을 보여준다.

• 정보처리학회논문지D
• /
• 제16D권3호
• /
• pp.433-440
• /
• 2009

최근 건설 분야의 정보화 기술이 발달함에 따라 건설업무의 생산성 향상과 비용 절감을 위한 다양한 건설자재 정보 서비스 차원의 web 기반 온라인 시스템이 급증하는 추세이다. 그러나 이러한 시스템들이 제공 중인 품질 및 규격등 건설자재정보가 표준화되지 못하여 특정자재의 정보획득시 여러 정보시스템을 이용하거나 유사한 작업을 반복하는등 건설현장 실무자들의 자재정보 활용에 있어 많은 어려움을 겪고 있다. 이에 본 연구에서는 국제 데이터 상품 속성 시스템(GDAS, Global Data Alignment System)을 기준으로 건설자재 정보항목을 정형화하고 건설자재 통합정보 관리를 위한 시스템 모델을 설계하였다. 본 시스템은 건설공정별 국제 표준분류체계(OmniClass Part-22)와 유엔 표준 제품 및 서비스 분류체계(UNSPSC, United Nations Standard Products and Services Classification)를 적용한 건설 자재의 자동 분류, 자재정보의 조건별 복합검색, 전자카탈로그의 실시간 자동구현, RFID 검색 및 관리 기능을 지원함으로써 자재정보의 효율적인 관리 및 활용이 가능하다.

• 정보처리학회논문지D
• /
• 제13D권3호
• /
• pp.445-454
• /
• 2006

구형 산업용 계측 장비들은 대부분 직렬 통신 기능만 갖추고 있다. 이러한 장비들을 인터넷으로 연결하기 위한 임베디드 통신 변환기를 구현하였다. 이 장비는 입출력 장치로 한 개의 WAN 포트, 두 개의 LAN 포트, 두 개의 직렬 포트를 갖고 있으며, 소프트웨어에 의하여 직렬 통신과 네트워크 통신 간의 상호 변환 기능을 수행하고, 기존의 직렬-이더넷 변환기와 구별되는 웹 모니터링 기능을 지원한다. ARM922T를 프로세서 코어를 사용하는 MICREL 사의 KS8695 네트워크 전용 칩셋을 사용하여 하드웨어를 구현하였고, 인터넷 기반 원격 제어를 위하여 웹 서버인 boa와 CGI 기능을 활용하였으며, 사설 IP 주소를 갖는 네트워크에서도 인터넷 접속이 가능하도록 IP 공유 기능을 추가하였으며, 통신 변환기의 역할을 수행하는 직렬-이더넷 변환 프로그램을 개발하였다. 그리고 개발된 통신 변환기를 태양열 에너지 전력 생산시스템의 원격 감시 장치로 활용하는 예를 제시하였다.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2006년도 학술대회 1부
• /
• pp.355-361
• /
• 2006

In large scale environments like airport, museum, large warehouse and department store, autonomous mobile robots will play an important role in security and surveillance tasks. Robotic security guards will give the surveyed information of large scale environments and communicate with human operator with that kind of data such as if there is an object or not and a window is open. Both for visualization of information and as human machine interface for remote control, a 3D model can give much more useful information than the typical 2D maps used in many robotic applications today. It is easier to understandable and makes user feel like being in a location of robot so that user could interact with robot more naturally in a remote circumstance and see structures such as windows and doors that cannot be seen in a 2D model. In this paper we present our simple and easy to use method to obtain a 3D textured model. For expression of reality, we need to integrate the 3D models and real scenes. Most of other cases of 3D modeling method consist of two data acquisition devices. One for getting a 3D model and another for obtaining realistic textures. In this case, the former device would be 2D laser range-finder and the latter device would be common camera. Our algorithm consists of building a measurement-based 2D metric map which is acquired by laser range-finder, texture acquisition/stitching and texture-mapping to corresponding 3D model. The algorithm is implemented with laser sensor for obtaining 2D/3D metric map and two cameras for gathering texture. Our geometric 3D model consists of planes that model the floor and walls. The geometry of the planes is extracted from the 2D metric map data. Textures for the floor and walls are generated from the images captured by two 1394 cameras which have wide Field of View angle. Image stitching and image cutting process is used to generate textured images for corresponding with a 3D model. The algorithm is applied to 2 cases which are corridor and space that has the four wall like room of building. The generated 3D map model of indoor environment is shown with VRML format and can be viewed in a web browser with a VRML plug-in. The proposed algorithm can be applied to 3D model-based remote surveillance system through WWW.

• KIEAE Journal
• /
• 제10권4호
• /
• pp.3-8
• /
• 2010

Recently, various daylight evaluation methods for visual environment have been developed; simulation analysis methods, numerical calculation, and data monitoring methods. However, it is impossible for simulation analysis to make real scenes and visualize real images exactly. Also, a numerical calculation is considered as an out of date and time-consuming mean. Therefore, for acquisition of accurate results, many studies often use the monitoring data methods. Especially, most studies regarding discomfort glare are evaluated by measuring the physical quantity of luminance through traditional measuring Minolta Luminance meters as an instrument. But, this method has a difficulty in measuring several points at the same time because of the limitation of spaces and time when mapping. So, this study focused on the potential usefulness of High Dynamic Range photography technique as a luminance mapping tool. In order to evaluate the accuracy of proposed programs such as webHDR, Photomatix and PHOTOLUX, this paper has conducted an experiment by using Canon EOS 5D and NICON Coolpix8400 digital camera.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.523-528
• /
• 2001

In this paper, we describe the internet-based remote home automation system that con control and manage home appliances or digital devices bi-directionally through Internet. The platform-independency of VRML and Java applet enables users to access their home appliances and to check current state of them in t he virtual reality environment. The main focus is on three aspects. One is on the virtual reality technology to support the user interface efficiently by using 3D GUI in web-browser. Another is on the system architecture that consists of Home server and its manager server called Gate server in this paper. These servers have been implemented by Java RMI which is the basic single programming interface for distribution of objects and services using Java technology. The third, remote PLC controller and each digital devices are composed of home networking by PLC using CEBus protocol.