• Journal of Korean Society for Atmospheric Environment
• /
• 제15권E호
• /
• pp.29-38
• /
• 1999

This study identified emission sources and emissions of air pollutants such as volatile organic compounds (VOCs), solvents, and acid gases produced from chemical plants. We collected air samples from various processes, reactors and facilities using VOC detectors and workers' experience. We identified chemical structures and emission concentrations of air pollutants. We analyzed total emissions of air pollutants emitted from the chemical plants. Also, we developed some emission reduction technologies based on chemical types and emission situations of the identified air pollutants. For reduction of air emissions of acid gases, we employed a method improving solubility of pollutants by reducing scrubber operation temperature, increasing surface area for effective contact of gas and liquid, and modifying or changing chemicals used in the acid scrubbers. In order to reduce air emissions of both amines and acid gases, which have had different emission sources each other but treated by one scrubber, we first could separate gas components. And then different control techniques based on components of pollutants were applied to the emission sources. That is, we first applied condensation and then acid scrubbing method using H2SO4 solution for amine treatment. However, we only used an acid scrubbing method using H2O and NaOH solution for acid gas treatment. In order to reduce air emissions of solvents such as dimethylformamide and toluene, we applied condensation and activated carbon adsorption. In order to reduce air emissions of mixture gases containing acid gases and slovents, which could not be separated in the processes, we employed a combination of various air pollution control devices. That is, the mixture gases were passed into the first condenser, the acid scrubber, the second condenser, and the activated carbon adsorption tower in sequence. In addition, for improvement of condensation efficiency of VOCs, we changed the type of the condensers attached in the reactors as a control device modification. Finally, we could successfully reduce air emissions of pollutants produced from various chenmical processes or facilities by use of proper control methods according to the types and specific emission situations of pollutants.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제43권2호
• /
• pp.115-137
• /
• 2004

In this paper, we verified the effect and appropriateness of the scheme to cure the math. disliking disposition which is the cause of underachievement in learning. We choose 3 middle schools as the subject of experiment for this research. Each experiment class consists of 27∼30 students(underachievers) whose final test results of 1st school year in the middle school are 30∼60 points. In this case, we also select some middle level students whose test results are more than 60 points for the normal experimental condition. For this research, we developed the suitable test materials to cure the mathematics disliking disposition of underachievers. We applied those test materials to the experiment schools during 2.5 months and we analysed the variation of disliking disposition, the variation of math. dislike students' number and the cure rate of the math. disliking disposition. From the results of this experimental study, we find that the factors of teacher and math recognition environment have only the significant difference of math. disliking disposition between experiment class and comparison class under the 5% significance level in one middle school. We understand that this results caused by teachers' careful advice and guidance in that middle school. We also find that the number of student who dislike mathematics decreased in two middle schools. Furthermore 50% of math. disliking dispositions are cured for 9 disliking factors in the lower grade group(the group of underachievers) and as a whole, we can see that 50% of cure rate for the 7 factors of math. disliking in two middle schools. So we can understand that the experiment of our research was performed successfully in two middle schools. In this research, we find out that the scheme to cure the disliking dispositions for the factors of math. disliking depends on the factors of teacher who take charge of cure. So teachers must take interest in and must have careful concern to students and their math. disliking.

• Journal of Korea Trade
• /
• 제26권3호
• /
• pp.45-62
• /
• 2022

Purpose - Using unexpected changes in geopolitical tensions on the Korean peninsula as a quasi-natural experimental setting, we examine whether and how geopolitical risks travel across borders through firm-level imports and exports linkages. We also test whether the effects are driven by either imports or exports and assess whether firms can effectively hedge themselves against geopolitical risks. Design/methodology - We focus on a series of unanticipated geopolitical events taken place in Korea in 2018. Making use of the shocks to geopolitical climate, we identify five milestone events toward peace talks. We employ the event studies methodology. We examine heterogenous firm-level stock price reactions around key event dates depending on firms' exposure to geopolitical risks. As a measure of firms' exposure to geopolitical risks in Korea, we utilize a text-based measure of firm-level trade links. When a firm announces and discusses its purchase of inputs from Korea or sales of outputs to Korea in their annual disclosure filings, we define a firm to have a trade relationship with Korea and have exposure to Korean geopolitical risks. Similarly, we use a measure of a firm's hedging policies based on a firm's textual mention of the use of foreign exchange derivatives in their annual disclosure. Findings - We find that U.S. firms that have direct trade links to Korea gained significantly more value when the intensity of geopolitical risks drops compared to firms without such trade links to Korea. The effects are pronounced for firms purchasing inputs from or selling outputs to Korea. We find that the effectiveness of foreign exchange hedging against geopolitical risks is limited. Originality/value - We document the international transmission of geopolitical uncertainty through trade linkages. Export links as well as import links serve as important nexus of transmission of geopolitical risks across borders. Hedging strategies involving foreign-exchanges derivatives do not seem to insulate firms again geopolitical risks. With the recent movements of localization and reshuffling of the global value chain, our results suggest a significant impact of geopolitical risks in Korea on the construction of the global value chain.

• 산업경영시스템학회지
• /
• 제17권32호
• /
• pp.255-266
• /
• 1994

This study does present things to suggest to foreign multinational corporation or domestic corporation through the empirical study on the standardization level. If we summary this study, it is as follows. In chapter I, we did institute the problems and explain the objects and methods and system of the study. In chapter II, we did explain the universality of the culture and international advertisement. Next, we did explain the background of doing specialization strategy and standardization strategy. Also we did study the previous study about the arguements for and against these. Lsat we did institute the hypothesises as follows. - Hypothesis 1 $H_0$ : The use of westerner appeal means has been increased than 11 years before and is able to increase continuously. - Hypothesis 2 $H_0$ : The use of westerner model and knowned has been increased than 11 years before and is able to increase continuously. - Hypothesis 3 $H_0$ : The use of the English language has been increased than 11 years before and is able to increase continuously. - Hypothesis 4 $H_0$ : The use of the west short piece and background has been increased than 11 years before and is able to increase continuously. In chapter III, we did refer to the method of this study. First, we did adjust the measure of standardization index, and we did work coding it, such after the two coder did check the freguency of the appeal meanstype about the advertisement of four daily report. Then we did select eight production as high involvement production and seven production as low involvement. We did test the coder's trust degree on the such sample to be selected through the 't-test' of the SAS statistic program and regression analysis through the spss/$pc^+$ statistic program to approve the this study's hypothesises. In chapter IV, we did analysis the results of the empirical study on the high or low involvement productions. First, the results of t-test to approve the coder's trust degree is that it is same statistically attentionly the distribution of the sample between coder at 10% attention level. Next, the results of the regression analysis on eight hypothesises are as fellows. In case of high involvement production we are able to speak that the use of the English language appeal among the eight appeals is only standardized. And incase of low involvement production, we are able to speak that the use of the hard-sell appeal among the eight appeds is only standardized. Therefore we did conclude that the standardization level of Korea newspaper advertisement is low. Also this suggests that it will do plan and do the specialzation strategy or localization strategy foreign multinational corporation or domestic corporation in Korea newspaper advertisement. In chapter V, we do present the boundary of this study and new study methods.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.45-50
• /
• 2004

In this study, we processed two procedures of application test of filler for special-purpose utility that are new application methods of aerated concrete and properties test of aerated concrete according to mixing ratio because we investigated the better use of aerated concrete as filler for fireproof safety and we proposed basic data about standardization of mixing of aerated concrete. We measured flow and volume change of aerated concrete. And if its volume doesn't change, we added measuring unit weight and compressive strength. To test application of aerated concrete as filler for fireproof safety, we filled up aerated concrete to fireproof safety according to suitable mixing ratio. Then we measured maximum temperature of inner part of fireproof safety in accordance with the standard test of fireproof. According to the results, aerated concrete as filler for fireproof safety could be possibly used. So when we make aerated concrete, we should consider using an adding agent as well as a foaming agent.

• 산업경영시스템학회지
• /
• 제20권44호
• /
• pp.377-391
• /
• 1997

We consider the characterized curriculum of industrial engineering for training the excellent technician. We classified many kinds of jobs in the industry and information society and compared them with the curriculums of 13 junior colleges sampled randomly. Also we inquired the degree of relation of the technique qualification for graduates from industrial engineering to the current major subjects. For fostering the cultured individuals the community demands, we amended and looked into the current liberal arts course to supplement it. We analyzed the opinions of students, professors and experts from various circles through questionnaires, and then we set up the direction and the priority order for developing the curriculum for training the technician. According to the analyzed results, we presented the curriculum centering around customers and demanders and introduced it in detail. We are going to utilize developed curriculum, teaching methods by computers and practice methods step by step, and make expansion to industrial engineering of other colleges. Then we are planning to apply to the reeducation for graduates and the social education that contains the industrial human resources and the ordinary persons.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2004년도 ISMP Pb-free solders and the PCB technologies related to Pb-free solders
• /
• pp.93-99
• /
• 2004

At present, LG Electronics pushes ahead to eliminate the Pb(Lead) -a hazardous material- from all products. Especially, we have performed to select the optimum standard composition of lead free alloy for the application to products for about 3 years from 2000. These days, we have the chance for applying to the mass-production. This project constructed the system for applying the lead free solders on consumer electronic products, which is one of the major products of the LG Electronics. To select the lead free solders with corresponding to the product features, we have passed through the test and applied with Sn-3.0Ag-0.5Cu alloy system to our products, and for the application to the high melting temperature composition, we secured the thermal resistance of the many parts and substrate and optimized the processing conditions. We have operated the temperature cycling test and the high temperature storage test under the standards to confirm the reliability of the products. On these samples, we considered the consequence of our decision by the operating test. For the long life time of the product, we have operated the temperature cycling test at $-45^{\circ}C-+125^{\circ}C$, 1 cycle/hour, 1000 cycles. Also we have tested the tin whisker growth about lead free plating on lead finish. We have analyzed with the SEM, EDS and any other equipment for confirming the failure mode at the joint and the tin whisker growth on lead free finish.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제3권6호
• /
• pp.575-596
• /
• 2009

Facing limited network resources such as bandwidth and processing capability, the Internet will have congestion from time to time. In this paper, we propose a scheme to maximize the total utility offered by the network to the end user during congested times. We believe the only way to achieve our goal is to make the scheme application-aware, that is, to take advantage of the characteristics of the application. To make our scheme scalable, it is designed to be class-based. Traffic from applications with similar characteristics is classified into the same class. We adopted the RED queue management mechanism to adaptively control the traffic belonging to the same class. To achieve the optimal utility, the traffic belonging to different classes should be controlled differently. By adjusting link bandwidth assignments of different classes, the scheme can achieve the goal and adapt to the changes of dynamical incoming traffic. We use the control theoretical approach to analyze our scheme. In this paper, we focus on optimizing the control on two types of traffic flows: TCP and Simple UDP (SUDP, modeling audio or video applications based on UDP). We derive the differential equations to model the dynamics of SUDP traffic flows and drive stability conditions for the system with both SUDP and TCP traffic flows. In our study, we also find analytical results on the TCP traffic stable point are not accurate, so we derived new formulas on the TCP traffic stable point. We verified the proposed scheme with extensive NS2 simulations.

• Journal of Astronomy and Space Sciences
• /
• 제28권4호
• /
• pp.261-265
• /
• 2011

We investigate the sunspot area data spanning from solar cycles 1 (March 1755) to 23 (December 2010) in time domain. For this purpose, we employ the Hilbert transform analysis method, which is used in the field of information theory. One of the most important advantages of this method is that it enables the simultaneous study of associations between the amplitude and the phase in various timescales. In this pilot study, we adopt the alternating sunspot area as a function of time, known as Bracewell transformation. We first calculate the instantaneous amplitude and the instantaneous phase. As a result, we confirm a ~22-year periodic behavior in the instantaneous amplitude. We also find that a behavior of the instantaneous amplitude with longer periodicities than the ~22-year periodicity can also be seen, though it is not as straightforward as the obvious ~22-year periodic behavior revealed by the method currently proposed. In addition to these, we note that the phase difference apparently correlates with the instantaneous amplitude. On the other hand, however, we cannot see any obvious association of the instantaneous frequency and the instantaneous amplitude. We conclude by briefly discussing the current status of development of an algorithm for the solar activity forecast based on the method presented, as this work is a part of that larger project.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 1997년도 한국전자거래학회 종합학술대회지
• /
• pp.263-268
• /
• 1997

Functional Modeling methodology, IDEF0 is widely used for modeling, analysis and description of enterprise system. The limitation of modeling components restricts applicability and give rise to confusion about model. In this paper, we propose new method to extend IDEF0. The first is adding modeling components which are semantic representations. In addition to ICOMs, we add the time and cost component which is required to execute the function. The second is tracing mechanism. When we need some information, we drive the functions related with the information by reverse tracing of the function which produces the information as a output and input. Through the tracing, we find out the bottleneck process or high cost process. Finally, we suggest the final decomposition level. We call the final decomposed function into unit function which has only one output data. We can combine and reconstruct some of functions because an unit function is similar to ‘lego block’. To reach the integrated system, the main problem to be solved is the integration of information produced by different functional subsystem. This can be resolved when the creation of data must be dependent on only one function. Through view integration of function output, we can guarantee the integrity of data.