• 제목/요약/키워드: wavelet technique

검색결과 607건 처리시간 0.028초

154kV 지중송전케이블에서 Wavelet을 이용한 Fault Location에 관한 연구 (A Study on Fault Location Using Wavelet in 154kV Transmission Power Cable)

  • 이준성;이종범;문성철
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 A
    • /
    • pp.437-439
    • /
    • 2000
  • This paper describes a fault location technique using wavelets in underground transmission cable system Estimation of fault location is performed using data sampled at two ends of underground system. In the case of 50% fault of total underground transmission line, fault location is calculated using sampled single-end data in underground transmission line. Traveling wave is utilized in capturing the travel time of the transients along the monitored lines between the relay and the fault point. This travel time information is provided by the wavelet. Simulation was performed using EMTP. ATP Draw and MATLAB. The results of fault location shown in this paper will be evaluated as an effective suggestion for fault to location in real underground transmission line.

  • PDF

A Design of Parallel Processing for Wavelet Transformation on FPGA (ICCAS 2005)

  • Ngowsuwan, Krairuek;Chisobhuk, Orachat;Vongchumyen, Charoen
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2005년도 ICCAS
    • /
    • pp.864-867
    • /
    • 2005
  • In this paper we introduce a design of parallel architecture for wavelet transformation on FPGA. We implement wavelet transforms though lifting scheme and apply Daubechies4 transform equations. This technique has an advantage that we can obtain perfect reconstruction of the data. We divide our process to high pass filter and low pass filter. With this division, we can find coefficients from low and high pass filters simultaneously using parallel processing properties of FPGA to reduce processing time. From the equations, we have to design real number computation module, referred to IEEE754 standard. We choose 32 bit computation that is fine enough to reconstruct data. After that we arrange the real number module according to Daubechies4 transform though lifting scheme.

  • PDF

수중 자율 운동체의 방향 제어를 위한 자기회귀 웨이블릿 신경회로망 기반 적응 백스테핑 제어 (Self-Recurrent Wavelet Neural Network Based Adaptive Backstepping Control for Steering Control of an Autonomous Underwater Vehicle)

  • 서경철;유성진;박진배;최윤호
    • 제어로봇시스템학회논문지
    • /
    • 제13권5호
    • /
    • pp.406-413
    • /
    • 2007
  • This paper proposes a self-recurrent wavelet neural network(SRWNN) based adaptive backstepping control technique for the robust steering control of autonomous underwater vehicles(AUVs) with unknown model uncertainties and external disturbance. The SRWNN, which has the properties such as fast convergence and simple structure, is used as the uncertainty observer of the steering model of AUV. The adaptation laws for the weights of SRWNN and reconstruction error compensator are induced from the Lyapunov stability theorem, which are used for the on-line control of AUV. Finally, simulation results for steering control of an AUV with unknown model uncertainties and external disturbance are included to illustrate the effectiveness of the proposed method.

Identification of beam crack using the dynamic response of a moving spring-mass unit

  • An, Ning;Xia, He;Zhan, Jiawang
    • Interaction and multiscale mechanics
    • /
    • 제3권4호
    • /
    • pp.321-331
    • /
    • 2010
  • A new technique is proposed for bridge structural damage detection based on spatial wavelet analysis of the time history obtained from vehicle body moving over the bridge, which is different from traditional detection techniques based on the bridge response. A simply-supported Bernoulli-Euler beam subjected to a moving spring-mass unit is established, with the crack in the beam simulated by modeling the cracked section as a rotational spring connecting two undamaged beam segments, and the equations of motion for the system is derived. By using the transfer matrix method, the natural frequencies and mode shapes of the cracked beam are determined. The responses of the beam and the moving spring-mass unit are obtained by modal decomposition theory. The continuous wavelet transform is calculated on the displacement time histories of the sprung-mass. The case study result shows that the damage location can be accurately determined and the method is effective.

Design of an Adaptive Nonlinear Compensator using a Wavelet Transform Domain Volterra Filter and a Modified Escalator Algorithm

  • Hwang, Dong-Oh;Kang, Dong-Jun;Nam, Sang-Won
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2001년도 ICCAS
    • /
    • pp.98.5-98
    • /
    • 2001
  • An efficient adaptive nonlinear compensator, based on a wavelet transform domain adaptive Volterra filter along with a modified escalator algorithm, is proposed to speed up the convergence rate of an adaptive LMS algorithm. In particular, it is well known that the e.g., slow convergence speed of an adaptive LMS algorithm depends on the statistical characteristics (e.g., large eigenvalue spread) of the corresponding auto-correlation matrix of the input vector. To solve such a convergence problem, the proposed approach utilizes a modified escalator algorithm and a wavelet transform domain adaptive LMS Volterra filtering technique, which leads to diagonalization of the auto-correlation matrix of the ...

  • PDF

DTW를 이용한 유도전동기 베어링 및 회전자봉 고장진단 (Fault Detection and Diagnosis of Faulty Bearing and Broken Rotor Bar of Induction Motors Based on Dynamic Time Warping)

  • 이재현;배현
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제31권1호
    • /
    • pp.95-102
    • /
    • 2007
  • The issues of preventive and condition-based maintenance, online monitoring, system fault detection, diagnosis and prognosis are of increasing importance. This study introduces a technique to detect and identify faults in induction motors. Stator currents were measured and stored by time domain. The time domain is not suitable for representing current signals, so wavelet transform is used to convert the signals onto frequency domain. The raw signals can not show the significant feature, therefore difference values between the signal of the health conditions and that of the fault conditions are applied. The difference values were transformed by wavelet transform and the features are extracted from the transformed signals. The dynamic time warping method was used to identify the fault type. This study describes the results of detecting fault using wavelet analysis.

A Comparative Study on Frequency Estimation Methods

  • Kim, Yoon Sang;Kim, Chul-Hwan;Ban, Woo-Hyeon;Park, Chul-Won
    • Journal of Electrical Engineering and Technology
    • /
    • 제8권1호
    • /
    • pp.70-79
    • /
    • 2013
  • In this paper, a comparative study on the frequency estimation methods using IRDWT (Improved Recursive Discrete Wavelet Transform), FRDWT(Fast Recursive Discrete Wavelet Transform), and GCDFT(Gain Compensator Discrete Fourier Transform) is presented. The 345[kV] power system modeling data of the Republic of Korea by EMTP-RV is used to evaluate the performance of the proposed two kinds of RDWT(IRDWT and FRDWT) and GCDFT. The simulation results show that the frequency estimation technique based on FRDWT could be the optimal frequency measurement method, and thus can be applied to FDR(Fault Disturbance Recorder) for wide-area blackout protection or frequency measurement apparatus.

Haar 웨이블릿 MRTD 와 FDTD를 이용한 비선형 회로 해석 (The Analysis of Nonlinear Circuits Using a Hybrid Haar Wavelet MRTD/FDTD Technique)

  • 배덕호;박범석;주세훈;김형동
    • 한국전자파학회논문지
    • /
    • 제11권4호
    • /
    • pp.667-673
    • /
    • 2000
  • 본 논문에서는 Haar 웨이블릿 다중분해능 시간영역 해석법과 유한차분 시간영역 해석법을 이용하여 집중소자가 연결된 비선형회로의 해석방법을 제시하였다. 집중소자가 연결된 구조체 해석 방법으로써 집중소자를 제외한 부분에는 Haar 웨이블릿 MRTD 차분방정식을 적용하고 집중소자 부분에는 국부적으로 FDTD 알고리즘을 적용하였다. 종단에 집중소자가 연결된 마이크로스트립 구조체와 단일 다이오드 혼합기를 해석하여 기존의 유한 차분 시간영역 해석법과 비교하였다.

  • PDF

웨이브렛 영역에서 가중치가 다른 MDSQ를 사용한 Multiple Description Coding (Multiple Description Coding in Wavelet domain by Unequal weighting MDSQ)

  • 윤웅식;최광표;이근영
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
    • /
    • pp.33-36
    • /
    • 2002
  • Multiple Description Coding(MDC) is a technique used to obtain two or more (often correlated) descriptions of a source, which are transmitted over different channels to receiver. Two descriptions of the source support two levels of reconstruction quality. When all the descriptions are received and used in the reconstruction, the source should be reconstructed with acceptable quality. In this work, we consider Multiple Description Scalar Quantizer(MDSQ) to wavelet transform domain. Conventional MDSQ schemes in wavelet domain considered description with equal weights at each sub-bands after quantization. But each sub-bands is unequal contribution to whole image quality. Therefore, we experiment the multiple description with unequal weight in each sub-bands.

  • PDF

웨이블렛 영역에서 근사 계수의 증감정보를 이용한 블라인드 워터마크 (A Blind Watermarking Technique Using Difference of Approximation Coefficients in Wavelet Domain)

  • 윤혜진;최태선
    • 대한전자공학회논문지SP
    • /
    • 제41권2호
    • /
    • pp.65-72
    • /
    • 2004
  • 본 논문에서는 강인성과 인지성을 함께 발전시킨 블라인드 워터마킹 방법에 대해 언급한다. 워터마크의 삽입 위치를 선정하기 위해 영상을 이산 웨이블렛 변환한 후 이웃한 관사 계수간의 증감 정보를 이용한다. 제안된 방법을 시험하기 위해 실험 영상에 워터마크를 삽입한 후 JPEG 손실 압축과 여러 필터의 적용과 같은 변형을 가하여 삽입한 워터마크를 다시 찾아내는 실험을 실시한다. 실험 결과는 제안된 워터마킹 방법이 비인지성을 유지하면서도 여러 가지 공격(attack)에 강인함을 보여준다.