• 한국생산제조학회지
• /
• 제8권1호
• /
• pp.135-141
• /
• 1999

Recently, advance signal analysis which is called "Time-Frequency Analysis" has been developed. Wavelet and Wigner Distribution are used to the method. Wavelet transform(WT) is applied to time-frequency analysis of waveforms obtained by an ultrasonic pulse-echo technique. The Gabor function is adopted as the analyzing wavelet. Wavelet analysis method is an attractive technique for evolution of material characterization evoluation. In this paper, the feasibility of suppression of ultrasonic background noise signal using WT has been presented. These results suggest that ultrasonic background noise ginal can be suppressed and enhanced even for SNR of 20.8 dB. This property of the WT is extremely useful for the detecting flaw echos embedded in background noise.und noise.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1407-1414
• /
• 2016

Unlike existing pulse-width modulation (PWM) techniques, such as sinusoidal PWM and random PWM, the wavelet PWM (WPWM) technique based on a Harr wavelet function can achieve a high fundamental component for the output voltage, low total harmonic distortion, and simple digital implementation. However, the original WPWM method lacks output voltage control. Thus, the practical application of the WPWM technique is limited. This study proposes an improved WPWM technique that can regulate output voltage amplitude with the addition of a parameter. The relationship between the additional parameter and the output voltage amplitude is analyzed in detail. Experimental results verify that the improved WPWM exhibits output voltage control in addition to all the merits of the WPWM technique.

• Smart Structures and Systems
• /
• 제2권2호
• /
• pp.127-140
• /
• 2006

In this study, a wavelet-based covariance-driven system identification technique is proposed for damage assessment of structures under ambient excitation. Assuming the ambient excitation to be a white-noise process, the covariance computation is shown to be able to separate the effect of random excitation from the response measurement. Wavelet transform (WT) is then used to convert the covariance response in the time domain to the WT magnitude plot in the time-scale plane. The wavelet coefficients along the curves where energy concentrated are extracted and used to estimate the modal properties of the structure. These modal property estimations lead to the calculation of the stiffness matrix when either the spectral density of the random loading or the mass matrix is given. The predicted stiffness matrix hence provides a direct assessment on the possible location and severity of damage which results in stiffness alteration. To demonstrate the proposed wavelet-based damage assessment technique, a numerical example on a 3 degree-of-freedom (DOF) system and an experimental study on a three-story building model, which are all under a broad-band excitation, are presented. Both numerical and experimental results illustrate that the proposed technique can provide an accurate assessment on the damage location. It is however noted that the assessment of damage severity is not as accurate, which might be due to the errors associated with the mode shape estimations as well as the assumption of proportional damping adopted in the formulation.

• Journal of Information Processing Systems
• /
• 제13권4호
• /
• pp.668-676
• /
• 2017

Recently, the importance of big data has been emphasized with the development of smartphone, web/SNS. As a result, MapReduce, which can efficiently process big data, is receiving worldwide attention because of its excellent scalability and stability. Since big data has a large amount, fast creation speed, and various properties, it is more efficient to process big data summary information than big data itself. Wavelet histogram, which is a typical data summary information generation technique, can generate optimal data summary information that does not cause loss of information of original data. Therefore, a system applying a wavelet histogram generation technique based on MapReduce has been actively studied. However, existing research has a disadvantage in that the generation speed is slow because the wavelet histogram is generated through one or more MapReduce Jobs. And there is a high possibility that the error of the data restored by the wavelet histogram becomes large. However, since the wavelet histogram generation system based on the MapReduce developed in this paper generates the wavelet histogram through one MapReduce Job, the generation speed can be greatly increased. In addition, since the wavelet histogram is generated by adjusting the error boundary specified by the user, the error of the restored data can be adjusted from the wavelet histogram. Finally, we verified the efficiency of the wavelet histogram generation system developed in this paper through performance evaluation.

• 정보처리학회논문지B
• /
• 제10B권4호
• /
• pp.459-464
• /
• 2003

본 논문에서 제안한 위치 이동에 무관한 웨이블렛 변환을 이용한 홍채 인식 방법은 영상 획득 장비에 의해 획득한 사용자의 눈 영상에 대하여 홍채 영역만을 추출하기 위한 전처리를 수행하고 전처리를 거친 홍채 영상에 의하여 사용자의 신원을 식별하는데 있어서 홍채 영상의 기울어짐 및 이동 문제를 해결하였다. 이를 위해서 일반적인 웨이블렛을 사용하는 대신, 위치 이동에 무관한 웨이블렛 변환을 통하여 최적의 특징값을 추출한후, 이를 코드화하여 저장한 후, 비교하여 본인 여부를 식별하였다. 실험결과 제안된 방법으로 생성된 특징 벡터와 기존에 등록된 특징 벡터의 일치도 측정에 있어서 종래의 웨이블렛 변환 홍채 인식 방법보다 오인식률(FAR) 및 오거부율(FRR)이 현저하게 감소하였다.

• 전기학회논문지P
• /
• 제60권2호
• /
• pp.76-81
• /
• 2011

Power system frequency is the main index of power quality indicating an abnormal state and disturbances of systems. The nominal frequency is deviated by sudden change in generation and load or faults. Power system is used as frequency relay to detection for off-nominal frequency operation and connecting a generator to an electrical system, and V/F relay to detection for an over-excitation condition. Under these circumstances, power system should maintain the nominal frequency. And frequency and frequency deviation should accurately measure and quickly estimate by frequency measurement device. The well-known classical method, frequency estimation technique based on the DFT, could be produce the gain error in accuracy. To meet the requirements for high accuracy, recently Wavelet transforms and analysis are receiving new attention. The Wavelet analysis is possible to calculate the time-frequency analysis which is easy to obtain frequency information of signals. However, it is difficult to apply in real-time implementation because of heavy computation burdens. Nowadays, the computational methods using the Wavelet function and transformation techniques have been searched on these fields. In this paper, we apply the Recursive Discrete Wavelet Transform (RDWT) for the frequency estimation. In order to evaluate performance of the proposed technique, the user-defined arbitrary waveforms are used.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.249-256
• /
• 2003

To investigate the safety and stability of the concrete lining, numerous studies have been conducted over the years and several methods have been developed. Most signal processing method of NDT techniques has based on the Fourier analysis. However, the application of Fourier analysis to analyze recorded signal shows results only in frequency domain, it is not enough to analyze transient waves precisely. In this study, a new NDT technique .using the wavelet theory was employed for the analysis of non-stationary wave propagation induced by mechanical impact in the concrete lining. The wavelet transform of transient signals provides a method for mapping the frequency spectrum as a function of time. To verify the availability of wavelet transform as a time- frequency analysis tool, model experiments have been conducted on the concrete lining model. From this study, it was found that the contour map by Wavelet transform provides more distinct results than the power spectrum by Fourier transform and it was concluded that Wavelet transform was an effective tool for the experimental analysis of dispersive waves in concrete structures.

• 전기전자학회논문지
• /
• 제4권2호
• /
• pp.233-240
• /
• 2000

This paper presents fuzzy clustering and wavelet transform analysis based technique for the industrial hourly load forecasting fur the purpose of peak demand control. Firstly, one year of historical load data were sorted and clustered into several groups using fuzzy clustering and then wavelet transform is adopted using the Biorthogonal mother wavelet in order to forecast the peak load of one hour ahead. The 5-level decomposition of the daily industrial load curve is implemented to consider the weather sensitive component of loads effectively. The wavelet coefficients associated with certain frequency and time localization is adjusted using the conventional multiple regression method and the components are reconstructed to predict the final loads through a five-scale synthesis technique. The outcome of the study clearly indicates that the proposed composite model of fuzzy clustering and wavelet transform approach can be used as an attractive and effective means for the industrial hourly peak load forecasting.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2004년도 제3회 정기총회 및 추계학술대회
• /
• pp.175-180
• /
• 2004

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1517-1523
• /
• 2015

The wavelet PWM (WPWM) technique has been applied in two-level inverters successfully, but directly applying the WPWM technique to three-level inverters is impossible. This paper proposes a WPWM technique suitable for a single-phase three-level inverter. The work analyzes the control strategy with the WPWM and obtains the design of its parameters. Compared with the SPWM technique for a single-phase three-level inverter under the same conditions, the WPWM can obtain high magnitudes of the output fundamental frequency component, low total harmonic distortion, and simpler digital implementation. The feasibility experiment is given to verify of the proposed WPWM technique.