• Ocean and Polar Research
• /
• 제29권2호
• /
• pp.113-121
• /
• 2007

The sound wave in the sea propagates under the effect of water depth, sound speed structure, sea surface roughness, bottom roughness, and acoustic properties of bottom sediment. In shallow water, the bottom sediments are distributed very variously with place and the sound speed structure varying with time and space. In order to investigate the seasonal propagation characteristics of low-frequency sound wave in the Yellow Sea, propagation experiments were conducted along a track in the middle part of the Yellow Sea in spring, summer, and autumn. In this paper we consider seasonal variations of the sound speed profile and propagation loss based on the measurement results. Also we quantitatively investigate variation of bottom loss by dividing the propagation loss into three components: spreading loss, absorption loss, and bottom loss. As a result, the propagation losses measured in summer were larger than the losses in spring and autumn, and the propagation losses measured in autumn were smaller than the losses in spring. The spreading loss and the absorption loss did not show seasonal variations, but the bottom loss showed seasonal variations. So it was thought that the seasonal variation of the propagation loss was due to the seasonal change of the bottom loss and the seasonal variation of the bottom loss was due to the change of the sound speed profile by season.

• 터널과지하공간
• /
• 제23권3호
• /
• pp.212-218
• /
• 2013

풍화된 응회암 시험편을 모사하기 위하여 최고 예열온도를 200, 400, 600($^{\circ}C$)로 한 예열시험편을 제작하였다. 각 예열시험편에 대한 실내시험을 통해 비중, 흡수율, 탄성파속도, 일축압축강도, 압열인장강도, 탄성계수, 포아송비, 슬레이크 내구성 지수를 측정하였다. 암석에 열을 가하는 경우 물성의 열화가 발생하는 것으로 나타났으나 예외적으로 슬레이크 내구성 지수는 별로 영향을 받지 않는 것으로 평가되었다. P-파 속도와 일축압축강도, 압열인장강도, 탄성계수, 흡수율 간에는 상당한 상관성이 있는 것으로 해석되었으며, P-파 속도를 알면 일축압축강도, 압열인장강도, 탄성계수, 흡수율을 추정할 수 있는 회귀식을 도출하였다.

• 한국재료학회지
• /
• 제29권6호
• /
• pp.363-370
• /
• 2019

The recent development of information and communication technologies brings new changes to automobile traffic systems. The most typical example is the advancement of dedicated short range communication(DSRC). DSRC mainly consists of an intelligent transportation system(ITS), an electronic toll collection system(ETCS) and an advanced traveler information system(ATIS). These wireless communications often cause unnecessary electromagnetic waves, and these electromagnetic waves, in turn, cause frequent system malfunction. To solve this problem, an absorber of electromagnetic waves is suggested. In this research, various materials, such as powdered metal and iron oxides, are used to test the possibility for an effective absorption of the unnecessary electromagnetic waves. The various metal powders are made into a thin sheet form by compositing through processing. The electromagnetic characteristics(complex permittivity, complex permeability) of the fabricated sheet are measured. As a result, we achieve -6.5 dB at 940 MHz(77.6 % absorption rate) with a 1.0 mm-thickness electromagnet wave absorber, and -9.5 dB at 940 MHz(88.8 % absorption rate) with a 2.0 mm-thickness absorber.

• 대한금속재료학회지
• /
• 제46권1호
• /
• pp.44-51
• /
• 2008

The effects of magnetic powder size on electromagnetic wave absorption characteristics in Fe-6.5Si-0.9Cr(wt%) alloy flakes/polymer composite sheets available for quasi-microwave band have been investigated. The composite sheet including small magnetic flakes with the size less than $26{\mu}m$ exhibited high power loss in the GHz frequency range as compared with the sheets having large alloy flakes of $45{\sim}75{\mu}m$. Moreover, both the complex permeability and the loss factor increased with the decrease in size of the alloy flakes. The large power loss of the sheets containing small magnetic flakes was attributed to the high complex permeability, especially their imaginary part. The high complex permeability of the sheets composed of small flakes was considered to be due to the highly thin shape of the flakes inducing low eddy-current loss.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.117-120
• /
• 2008

본 논문은 차량 충돌방지 레이더의 허상방지용 전파흡수체를 유전손실재료인 $TiO_2$을 이용하여 개발하였다. 먼저 전파흡수체 샘플을 유전손실재료인 $TiO_2$ 와 바인더인 CPE를 사용하여 조성비별 제작하고, 네트워크 아날라이저를 이용하여 측정한 5-parameter로부터 1-Port Method를 이용하여 복소비유전율을 계산하였다. 그리고 계산된 복소비유전율을 이용하여 전파흡수체를 설계 및 제작한 결과 조성비 $TiO_2$:CPE=70:30 wt.%, 두께 1.85 mm, 주파수 76-77 GHz에서 20 dB 이상의 전파를 흡수하는 전파흡수체를 개발하였다.

• Journal of electromagnetic engineering and science
• /
• 제8권2호
• /
• pp.70-75
• /
• 2008

In this paper, the EM wave absorber was designed and fabricated for countermeasure against EMI from a ceiling of a tollgate in ETC system. We fabricated several samples in different composition ratios of MnZn-ferrite, Carbon, and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability according to composition ratio. The optimized mixing ratio of MnZn-ferrite, Carbon, and CPE was found as 40:15:45 wt.% by experiments and simulation. Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the developed EM wave absorber has the thickness of 3.3 mm and absorption ability was more than 20 dB in the case of normal incidence and more than 11 dB for the incident angle from 15 to 45 degrees at 5.8 GHz. Therefore, it was confirmed that the newly developed absorber can be used for ETC system.

• 한국전자파학회논문지
• /
• 제14권3호
• /
• pp.290-295
• /
• 2003

Sheet형 전파흡수체를 제작하여 Mn-Zn페라이트의 입자크기에 따른 전파흡수능의 관계를 조사하였다. 입자 크기가 증가함에 따라 정합주파수는 낮은 쪽으로 이동하였으며, 정합주파수에서 전파흡수능은 감소하였다. 하지만 휴대폰의 사용주파수인 0.8 ㎓와 1.8 ㎓에서는 입자의 크기가 큰 것으로 구성되어 있는 전파흡수체자 작은 입자로 구성되어 있는 전파흡수체보다 우수한 전파흡수능을 나타내었다. 따라서 휴대폰용 전파흡수체를 Mn-Zn 페라이트 파우더로 제작할 경우에는 입자의 크기가 큰 것이 바람직하다고 생각된다.

• 한국정보통신학회논문지
• /
• 제15권6호
• /
• pp.1397-1403
• /
• 2011

본 논문에서는 W-Band(75 GHz~110 GHz) 주파수 대역에서 전파특성 분석을 위한 샘플홀더 제작을 위하여 수행되었다. 먼저 도파관 내에서 전파의 전파이론을 정립하고 재료정수 측정기법을 도출하였다. 그리고 밀리미터파 W-band에 알맞은 도파관형 샘플홀더를 설계 및 제작하고 RAM 샘플을 이용하여 재료정수 및 전파흡수능을 측정하여 분석하였다. 분석결과 샘플시료 특성을 정확하게 측정할 수 있음을 확인하였으며, 향후 이 측정 샘플홀더는 W-band 대역 전파특성 분석을 위해 매우 유용하게 쓰일 수 있을 것이다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2003년도 한국우주과학회보 제12권2호
• /
• pp.40-40
• /
• 2003

When the magnetotail is disturbed by an impulsive input such as the substorm onset, compressional magnetohydrodynamic (MHD) waves play an important role in delivering perturbed energy and exciting various wave modes and currents. The plasmasheet, in which relatively hot plasmas exist, is surrounded by relatively cold plasmas at the plasma sheet boundary layer (PSBL) and the equatorial plasmasphere. Since the Alfven speed significantly varies near these regions, the compressional waves are expected to undergo mode conversion by inhomogeneity at the boundary between cold and hot plasma regions. We investigate how the initial compressional MHD wave energy is reflected, transmitted, and absorbed across that boundary by adopting the invariant imbedding method (IIM) which gives the exact reflection, transmission, and absorption coefficients without any theoretical approximations for given frequencies and wave numbers. The IIM method is very useful in quantifying the reflection and transmission of compressional waves in the sense that we can calculate how much fast mode wave energy is delievered into shear Alfven waves or field-aligned currents. Our results show that strongly localized absorption occurs at the boundary region. This feature suggests that localized field-aligned currents can be impulsively excited at such boundary regions by any compressional disturbances, which is highly associated with impulsive auroral brightening at the substorm onset. We compare our results with previous studies in cold inhomogeneous plasmas.

• 한국자기학회지
• /
• 제10권2호
• /
• pp.86-92
• /
• 2000

자성 박막 표면에서의 일축 자기이방성을 고려한 자화의 경계조건을 Maxwell 방정식과 자화에 대한 Gilbert 방정식을 동시에 만족하는 해에 적용하여 자성박막에서 여기되는 스핀파 공명신호에 대한 모의실험을 수행하였다. 공명신호에 영향을 주는 물리량은 박막두께, 교환강성 상수, 표면 자기이방성 상수, 포화자화, 감쇠 상수, 전기비저항 등이며, 이러한 물리량들이 자성 박막에서 여기되는 스핀파 거동에 미치는 영향을 공명흡수선의 공명자기장, 선폭, 세기로 구분하여 조사하였다.