Browse > Article
http://dx.doi.org/10.5515/JKIEES.2008.8.2.070

A Study on Development of the EM Wave Absorber for ETC System  

Park, Soo-Hoon (Department of Radio Communication Engineering, Korea Maritime University)
Kim, Dong-Il (Department of Radio Communication Engineering, Korea Maritime University)
Song, Young-Man (Ace Technology)
Yoon, Sang-Gil (Department of Radio Communication Engineering, Korea Maritime University)
Publication Information
Journal of electromagnetic engineering and science / v.8, no.2, 2008 , pp. 70-75 More about this Journal
Abstract
In this paper, the EM wave absorber was designed and fabricated for countermeasure against EMI from a ceiling of a tollgate in ETC system. We fabricated several samples in different composition ratios of MnZn-ferrite, Carbon, and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability according to composition ratio. The optimized mixing ratio of MnZn-ferrite, Carbon, and CPE was found as 40:15:45 wt.% by experiments and simulation. Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the developed EM wave absorber has the thickness of 3.3 mm and absorption ability was more than 20 dB in the case of normal incidence and more than 11 dB for the incident angle from 15 to 45 degrees at 5.8 GHz. Therefore, it was confirmed that the newly developed absorber can be used for ETC system.
Keywords
ETC; EM Wave Absorber; MnZn-ferrite; Carbon; Permittivity; Permeability;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 K. Matsumoto, Y. Miura, T. Ozawa, O. Hashimoto, and O. Okada, 'Wave absorber with circular lattice using metal mesh for improving ETC environment', EMC Zurich 2007. 18th International Zurich Symposium, no. 24-28, pp. 233-236, Sep. 2007
2 Y. Naito, Electromagnetic Wave Absorbers, Tokyo: New Ohm, 1987
3 T. Doi, N. Tashiro, T. Inoue, A. Fujita, and O. Hashimoto, 'A study on a wave absorber using anisotropic carbon for ETC application', Proc. of 2005 IEEE AP-S International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting, no. 61-67, Jul. 2005
4 Sang-Hyun Moon, Seung-Jae Shin, Jae-Man Song, Dong Il Kim, and Ki-Man Kim, 'A study on the development of ferrite EM wave absorbers for GHz frequency band', Korea Electromagnetic Engineering Soc., vol. 14, no. 12, pp. 1329-1334, Dec. 2003
5 T. Weiland, 'A discretization method for the solution of maxwell's equations for six-component fields', Electronics and Communication(AEU), vol. 31, no. 3, pp. 116-120, 1977
6 Dae-Hun Kim, Dong Il Kim, Chang-Mook Choi, and Jun-Young Son, 'A study on design and fabrication of complex type EM wave absorber with super wide-band characteristics', International Joural of Navigation and Port Research, vol. 30, no. 2, pp. 161-166, Mar. 2006   DOI   ScienceOn
7 Chang-Mook Choi, Dong Il Kim, Rui Li, and Kwang- Soob Ko, 'Development of the electromagnetic wave absorber for 94 GHz radar sensors using permalloy', Internat. J. KIMICS, vol. 4, no. 3, pp. 1-4, Sep. 2006
8 K. Haneda, J. Takada, T. Iwata, Y. Wakinaka, and T. Kunishima, 'Experimental determination of propagation paths for the ETC System-Equipment development and field test', Trans. IEICE, vol. E87-A, no. 11, pp. 3008-3015, Nov. 2004
9 M. Hanazawa, O. Hashimoto, and K. Wada, 'New wave absorber using resistive film for ETC system', EMC Europe 2002 Int Symp. Dig., vol. 2, pp. 703- 705, Sep. 2002