• Asian Journal of Atmospheric Environment
• /
• v.7 no.1
• /
• pp.8-16
• /
• 2013

The fog water chemistry and deposition in northern Japan were investigated by fog water and throughfall measurements in 2010. Fog water was sampled weekly by an active-string fog sampler at Lake Mashu from May to November. Throughfall measurements were conducted using rain gauges under three deciduous trees along the somma of the lake from August to October. The mean fog deposition rate (flux) was calculated using throughfall data to estimate the total fog water deposition amount for the entire sampling period. $NH_4{^+}$ and $SO{_4}^{2-}$ were the most abundant cation and anion, respectively, in the fog water samples. A mean pH of 5.08 in the fog water, which is higher than those in rural areas in Japan, was observed. The [$NH_4{^+}$]/[$SO{_4}^{2-}$] equivalent ratio in fog water was larger than 1.0 throughout the study period, indicating that $NH_3$ gas was the primary neutralizing agent for fog water acidity. The mean rate and total amount of fog water deposition were estimated as 0.15 mm $h^{-1}$ and 164 mm, respectively. The amounts of nitrogen and sulfate deposition via fog water deposition were corresponded to those reported values of the annual deposition amounts via rainfall.

• Journal of Industrial Technology
• /
• v.20 no.B
• /
• pp.183-188
• /
• 2000

In this paper, we present a development of automatic fog water collector that operates during fog events. This collector consists of fraction collectors, a wind hall and a fog sensor. When a fog event is begin, then the fog sensor would judge whether it is a fog or not. If a fog is detected, the fog would be gathered by air suction fans, At the same time, the wind direction, the wind velocity, the atmospheric temperature and pressure would be measured and record simultaneously. We are also developing a wireless communication system for the remote control and data analysis to collect, store and process data collected in the automatic fog water collector.

• Atmosphere
• /
• v.18 no.4
• /
• pp.417-427
• /
• 2008

In this paper, we analyzed the physical and thermodynamic characteristics of fog by using the integrated water vapor (IWV) from Global Positioning System (GPS) networks and the regular observation data of meteorological stations in GPS sites. The cases of a radiation and an advection fog were selected as samples, the conversions of water substance from the water vapor to cloud water in fog were detected by the Bulk Water-Continuity Model, and the pattern analysis is adapted on GPS IWV, temperature, wind and relative humidity. Under the specific hypothesis (saturation and stable), GPS IWV could detect quantitatively the phase changing between the water vapor and cloud water content with condensation/evaporation during the formation and dissipation of fog. After it reaches to the saturation, the relative humidity can be a limited indicator for fog. However, GPS IWV can detect the status change of fog even after the saturation. It has indicated that GPS IWV could be a new observing technique for the processes of the fog formation and the dissipation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.385-385
• /
• 2000

In this paper, We presents the development of an automatic fog water collector that operates during fog events. This collector consists of fraction collectors, a wind hall and a fog sensor. If a fog event occurred, then the fog sensor wouldjudge whether it is a fog or not. If the fog sensor judged the fug, then the fog in the air would be rucked by suction fans. At the same time, the wind direction, the wind velocity, the atmospheric temperature and the atmospheric pressure would be measured and recorded. We are also developing a wireless communication system for the remote control and the remote data analysis in order to collect, store and process the data collected in the automatic fog water collector.

• Journal of the Korea Computer Graphics Society
• /
• v.25 no.3
• /
• pp.31-41
• /
• 2019

A fog screen consists of tiny water drops and the viewers see the image transmitted through the fog screen. In contrast to ordinary screens, the viewers can see the actors passing through the image on the fog screen on stage. In this paper, we describe methods to build a top-down fog screen where fog particles generated in top space fall by gravity forming a flat vertical screen. We use a fog generation technique in which fog particles come out of the water surface when ultrasound vibrators immersed in water tank vibrate. We describe how fog particles form a flat screen while coming out of the fog passage tunnel, by generating guiding winds beside the fog screen. This technique utilizes the principle that fog particles are generated on the surface of a water tank by an ultrasonic vibrator placed in a water tank. The technique of forming a guiding wind on both sides of the passage exit where the fog comes out and the design and manufacturing method of the fog screen generating device are described so that the generated fog group can maintain one plane.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.3
• /
• pp.13-19
• /
• 2021

Fog is a phenomenon caused by condensation of water vapor in the atmosphere, which is when very fine drops of water float in the atmosphere and the distance of visible is less than 1km. Fog dispersion technology is a technology that removing or weakening fog by using artificial methods to reduce damage caused by fog. It is applied differently depending on the temperature of fog generation rather than the cause of fog. This study conducted an experimental study on the fog dispersion mechanism in order to minimize damage caused by fog on the road, and studied two methods of over-cooling dispersion using solid-carbon-dioxide as a dissipated particle and dissipating fog particles through thermal acoustic waves. As a result the two methods proved experimentally that were capable of dissipating fog.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.5
• /
• pp.491-498
• /
• 1998

Fog water samples were collected at Chunchon, Korea, by using active fog sampler during foggy Period in fall of 1996 and 1997. The average annual foggy days at Chunchon increased from 37 days, for the yearn 1963 ∼ 1973, to 63 days , for the year 1974∼1993 that followed the construction of Lake Soyang. Volume weighted mean pH of fog water was 5.5 with a range of 4.8 to 7.0 in 1996, and 5.0 with a range of 4.1 to 6.6 in 1997. These pH values were higher than those of rain water sampled in corresponding years. However the concentration of ionic species in fog water were 26 times higher than those of rain water. The major anions in fog water were in order of SO42-, NO3- and Cl-, and their average concentrations were 1770.6meq/ml, 346.2 meq/ml, 216 meq/ml in 1996, and 901.8meq/ml, 269.6meq/ml, 141.0meq/ml in 1997, respectively. The major cations were Ca2+, NH4+, Mg2+ and K+, and their average concentrations frere 408.5meq/ml, 280.0meq/ml, 43.8meq/ml, 45.2meq/ml in 1996, and 400.4 meq/ml, 299.0meq/ml, 73.1meq/ml, 44.5meq/ml in 1997, respectively. The fraction acidity of fog water was 0.006 and that of rain water was 0.2, which means fog water was much more neutralized than rain water.

• Journal of Environmental Science International
• /
• v.15 no.7
• /
• pp.623-634
• /
• 2006

In this study, characteristics of fog at Mokpo as the west coastal area of Jeonnam were investigated, using statistical analysis of observed fog and meteorological data. Higher frequency of the fog occurrence at Mokpo was showed in spring(32%) and summer(34%) due to the seasonal high atmospheric pressure. Regional characteristics as radiation cooling, advection of fog and water vapor from surrounding sea and Yeongsan lake, and frontal fog had major effect on the coastal fog at Mokpo on the meteorological conditions of north-west/south wind and calm($0{\sim}2m/s$). Also, as the results of analyzing data of before and after the construction of Yeongsan dam, the frequency of annual mean fog days increased 41 %, specially increased 178% in autumn. The increase of fog days mainly resulted from evaporation during colder seasons and from temperature inversion during warmer seasons over the water surface of Yeongsan lake. The construction of Yeongsan dam had a little effect on the meteorological conditions concerning fog occurrence, because Yeongsan dam which only supplies the water for use do not always carry out outlet of the cold water. In addition, the sea fog at Heuksando located in offshore had not effect on the occurrence of fog at Mokpo.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.127-134
• /
• 2011

A traffic accident which happens in Expressway during dense fog is more likely to cause the sequential accidents and high death rate. So, the preventive measures shall be taken at dangerous areas to enhance the efficiency of roads and minimize the accidents and the resultant damages. So, it is necessary to find out the characteristics of freeway zone which has high risk of fog occurrence and to establish the comprehensive safety strategy on installation and operation of the safety equipment. In this study, I developed a fog forecasting model by using the freeway fog data. This model can be used as the fog forecasting model in dealing with fog problems when new road is planned. The model was developed by using a statistical analysis technique or the regression analysis, focusing on the variables such as geographical features and regional conditions, distances to water sources and the area of water source. I have segmented the models by classifying the area into inland area and coastal area. The distance to water source and area of the water source located around the freeway were found to be main factors causing fog.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.5
• /
• pp.181-187
• /
• 2000

Fatigue tests under acid fog environment were carried out to investigate the effect of acid fog on the corrosion fatigue strength of SM55C in comparison with distilled water. Main results obtained are as follows. The fatigue strength of SM55C under acid fog environment are remarkably decreased as compared with that of distilled water specimen. The corrosive effect of acid fog on fatigue strength are more serious under low stress amplitude level than under high stress amplitude level, and this leads to continuous reduction of fatigue strength. Under acid fog environment in early stage of crack growth. because the corrosive components dissolve the crack face offensively. the unstable fracture surface appears. But, the stable corrosion precipitation and products layer are formed on the fracture surface in accordance with the time pass.