• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.6
• /
• pp.528-533
• /
• 2019

We investigated the growth of $(Al_xGa_{1-x})_2O_3$ thin films on c-plane sapphire substrates that were grown by mist chemical vapor deposition (mist CVD). The precursor solution was prepared by mixing and dissolving source materials such as gallium acetylacetonate and aluminum acetylacetonate in deionized water. The [Al]/[Ga] mixing ratio (MR) of the precursor solution was adjusted in the range of 0~4.0. The Al contents of $(Al_xGa_{1-x})_2O_3$ thin films were increased from 8 to 13% with the increase of the MR of Al. As a result, the optical bandgap of the grown thin films changed from 5.18 to 5.38 eV. Therefore, it was determined that the optical bandgap of grown $(Al_xGa_{1-x})_2O_3$ thin films could be effectively engineered by controlling Al content.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.902-908
• /
• 1995

Oxidative factors of lipid in the roasted laver Porphyra tenera(RL) and roasted-seasoned laver(R-SL) depending on various light sources, water activities, packaging materials and storage temperatures were investigated by peroxide value and color. Major fatty acids of RL were 46.4% eicosapentaenoic acid and 14.9% palmitic acid. Lipid oxidation was decreased in order of darkness, incandescent and fluorescent, decreased sharply with the decrease of water activity and temperature, and also reduced by the packaging material with strong barriers of water vapor, oxygen and light. From kinetics of lipid oxidation, it was supposed that oxidation of R-SL was three times faster than RL. On the other hand, reduction of the total chlorophyll content in RL was stronger than R-SL.

• Korean Journal of Food Science and Technology
• /
• v.36 no.3
• /
• pp.432-439
• /
• 2004

Increase in water vapor barrier properties of sodium alginate films was studied by preparing composite films with fatty acids, i.e., lauric, palmitic, stearic, and oleic acids, and by treatment with 3% $CaCl_{2}$ solution for 3 min. Film thickness, surface color, microstructure, tensile strength (TS), elongation at break (E), water vapor permeability (WVP), water solubility (WS), and sorption isotherm of films were investigated. Microstructure of films observed with SEM was changed by fatty acid and $CaCl_{2}$ treatments. TS decreased 25-70% depending on fatty acid used, and increased 1.5- to 2-fold by $CaCl_{2}$ treatment. E decreased by both fatty acid and $CaCl_{2}$ treatments. Except oleic acid, WVP decreased significantly (p<0.05) by forming composite films with fatty acids, particularly with stearic acid, WVP decreased more than two-fold. WS also decreased by fatty acid and $CaCl_{2}$ treatments. In stearic acid, WS decreased about 30-fold by combined treatment of fatty acid and $CaCl_{2}$. Sorption isotherm showed typical biphasic pattern with deliquescent point of 0.75. Results of isotherms and BET monolayer moisture content indicated hydrophilicity of film decreased by $CaCl_{2}$ treatment.

• Applied Chemistry for Engineering
• /
• v.27 no.1
• /
• pp.92-100
• /
• 2016

Low-temperature conversion of nitrogen oxides using plasma-assisted hydrocarbon selective catalytic reduction of (HC-SCR) was investigated. Plasma was created in the catalyst-packed bed so that it could directly interact with the catalyst. The effect of the reaction temperature, the shape of catalyst, the concentration of n-heptane as a reducing agent, the oxygen content, the water vapor content and the energy density on $NO_x$ removal was examined. $NO_x$ conversion efficiencies achieved with the plasma-catalytic hybrid process at a temperature of $250^{\circ}C$ and an specific energy input (SIE) of $42J\;L^{-1}$ were 83% and 69% for one-dimensional Ag catalyst ($Ag\;(nanowire)/{\gamma}-Al_2O_3$) and spherical Ag catalyst ($Ag\;(sphere)/{\gamma}-Al_2O_3$), respectively, whereas that obtained with the catalyst-alone was considerably lower (about 30%) even with $Ag\;(nanowire)/{\gamma}-Al_2O_3$ under the same condition. The enhanced catalytic activity towards $NO_x$ conversion in the presence of plasma can be explained by the formation of more reactive $NO_2$ species and partially oxidized hydrocarbon intermediates from the oxidation of NO and n-heptane under plasma discharge. Increasing the SIE tended to improve $NO_x$ conversion efficiency, and so did the increase in the n-heptane concentration; however, a further increase in the n-heptane concentration beyond $C_1/NO_x$ ratio of 5 did not improve the $NO_x$ conversion efficiency any more. The increase in the humidity affected negatively the $NO_x$ conversion efficiency, resulting in lowering the $NO_x$ conversion efficiency at the higher water vapor content, because water molecules competed with $NO_x$ species for the same active site. The $NO_x$ conversion efficiency increased with increasing the oxygen content from 3 to 15%, in particular at low SIE values, because the formation of $NO_2$ and partially oxidized hydrocarbon intermediates was facilitated.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.1
• /
• pp.5-12
• /
• 2014

In this study, we developed the electric heating equipment and applied for soft ground improvement. The developed heat pipe is 4 m-length and consumes 1 kW/m, which is consisted of Ni-Cr wire. It was installed in 3.5~4.5 m below ground surface and heated for 96 hours (48 hours, 2 times). The temperature variation and vapor pressure caused by electric heating was measured by the thermometer and pressure gauge which were installed in the ground (5.0 m), and the tip resistances were measured by static electronic piezo-cone penetration test (CPT). As the results of experiments, 2-order polynomial curve was shown to adjust the variation of tip resistance and the temperature distribution with the horizontal distance from electric heater, whose R2 value is close to 1. In addition, in-situ pore-water pressure and water content was decreased.

• Journal of Ecology and Environment
• /
• v.35 no.3
• /
• pp.213-225
• /
• 2012

Sap flux density (SFD) measurements were used, in combination with morphological characteristics of trees and forest structure, to calculate whole-tree transpiration, stand transpiration (St) and mean canopy stomatal conductance (Gs). Analysis based on the relationships between the morphological characteristics of trees and whole tree water use, and on the responses of SFD and Gs to short wave radiation (RR), vapor pressure deficit (VPD) and soil water content (SWC) during drought and non-drought periods were conducted. The results showed a strong positive correlation between whole tree transpiration and both tree diameter at breast height (DBH) ($r^2$ = 0.95, P < 0.05) and sapwood area (SA) ($r^2$ = 0.98, P < 0.05). Relationships between SFD and DBH ($r^2$ = 0.25), as well as SA ($r^2$ = 0.17) were weak. Daily SFD of Quercus serrata Thunb was closely related to VPD and RR. Although operating at different time scales, RR and VPD were important interacting environmental controls of tree water use. SFD increased with increasing VPD (<1 kPa) and RR. SWC had a considerable effect on stand transpiration during the drought period. The relationships between SFD, VPD and RR were distorted when SWC dropped below 35%.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.358-364
• /
• 1995

In order to determine the moisture content level for safe storage of wild vegetables, drying characteristics and water vapor sorption characteristics of four vegetables, i.e., zucchini slice, sweet potato stem, taro stem, and platycodon, were investigated. The drying curves of these vegetables were consisted of three characteristic stages which were the initial settling down period, the constant drying rate period, and the falling drying rate period. And the falling rate period of the vegetables showed 2 or 3 parts of falling rate. All of the falling rate curves of the vegetables showed upwardly convex shape which is known as a characteristic pattern for the drying of fibrous food materials. The critical moisture contents of the vegetables were $8.29{\sim}9.75,\;10.40{\sim}15.08,\;9.51{\sim}14.52\;and\;3.29{\sim}3.56g\;H_2O/g$ dry solids for zucchini slice, sweet potato stem, taro stem, and platycodon, respectively. Activation energy values of drying rate during falling rate period were 2.30, 2.11, 4.97, and 2.80 kcal/mol for zucchini slice, sweet potato stem, taro stem, and platycodon respectively. The BET monolayer moisture contents of the vegetables were $10.05{\sim}13.59,\;9.49{\sim}12.69,\;9.50{\sim}16.48\;and\;5.01{\sim}5.44g\;H_2O/g$ dry solids for zucchini slice, sweet potato stem, taro stem, and platycodon, respectively. And these values were found to be very compatible with the values of the critical moisture content. Consequently, it was found that the moisture of these vegetables should be removed below the BET monolayer moisture content or below the critical moisture content for the long term storage.

• Particle and aerosol research
• /
• v.8 no.4
• /
• pp.161-172
• /
• 2012

Three-dimensional numerical simulation using a computational fluid dynamics (CFD) was carried out in order to investigate the formation and dispersion of the plume discharged from the stack of a thermal power station. The simulation was based on the standard ${\kappa}{\sim}{\varepsilon}$ turbulence model and a finite-volume method. Warm and moist exhaust from a power plant stack forms a visible plume as entering the cold ambient air. In the simulation, moisture content, emission velocity and temperature of the flue gas, air temperature and wind speed were dealt with the main parameters to analyze the properties of the plume composed mainly of water vapor. As a result of the simulation, the plume could be more apparent in cold winter due to a big difference of latent heat capacity. At no wind condition, the white plume rises 120 m upward from the top of the stack, and expands to 40 m around from the stack in cold winter after flue gas heat recovery. The influencing distance of relative humidity will be about 100 m to 400 m downstream from the stack with a cross wind effect. The decrease of flue gas temperature by heat recovery of thermal energy facilitates the formation of the plume and restrains its dispersion. Wind speed with vertical distribution affects the plume dispersion as well as the density.

• Korean Journal of Materials Research
• /
• v.21 no.3
• /
• pp.149-155
• /
• 2011

We investigated tribological characteristics of diamond-like carbon (DLC) in a condition with carbon nanotube (CNT) content of 1wt% in aqueous solution. Si-DLC films were deposited by radio frequency plasma enhanced chemical vapor deposition (RF-PECVD) process on Al6061 aluminum alloy. In this study, the deposition of DLC films was carried out in vacuum with a chamber pressure of 10-5 to 10-3 Torr achieved by mechanical pump followed by turbo molecular pump. The surface adsorbed oxygen on the Aluminum substrates was removed by passing Ar gas for 10 minutes. The RF power was maintained at 500W throughout the experiment. A buffer layer of HMDSO was deposited on the substrate to improve the adhesion of DLC coating. At this point CH4 gas was introduced in the chamber using gas flow controller and DLC coating was deposited on the buffer layer along with HMDSO for 50 min. The thickness of 1 ${\mu}m$ was obtained for DLC films on aluminum substrates The tribological properties of as synthesized DLC films were analyzed by wear test in the presence of dry air, water and lubricant such as CNT ink.

• Preventive Nutrition and Food Science
• /
• v.12 no.2
• /
• pp.122-125
• /
• 2007

Gelidium corneum films were prepared using cinnamaldehyde as a cross-linking agent and their physical properties were determined. Tensile strength (TS) value of the film containing 0.01% cinnamaldehyde was higher than the control by 8.31 MPa. However, increasing cinnamaldehyde from 0.01% to 0.1% significantly decreased TS from 9.54 MPa to 0.03 MPa, and no film was formed at 1% cinnamaldehyde. On the contrary, when cinnamaldehyde content was increased from 0.01% to 0.1%, % elongation was increased from 1.44% to 2.75%. Water vapor permeability (WVP) of the film containing 0% and 0.01% cinnamaldehyde were 1.64 ng m/m$^2$sPa and 1.42 ng m/m$^2$sPa, respectively. There was no significant difference in Hunter values among treatments. Scanning electron microscopy results revealed that both cinnamaldehyde and control films had similar surfaces. These results suggest that 1.5% Gelidium corneum treated with 0.01% cinnamaldehyde should be the most suitable condition for film formation.